ST0003-LR090608CONCRETE CORE STRENGTH TEST REPORT
Report Number: 94081163.0104 Irerracon
Service Date: 06/03/09 8901 Carpenter Frwy, Ste 100
Report Date: 06/08/09 Dallas, TX 75247
214 - 630 -1010 Reg No: F -3272
Client Project
City of Coppell TX Coppell Road - #ST00 -03
Attn: Albert Samaniego Sandy Lake Road to
Engineering Dept Cooper Lane
PO Box 9478 Coppell, TX
Coppell, TX 75019 Project Number: 94081163
Material Information
Density
Type
(pcf)
2
Sample Information
2
150.3
Specified Strength: 3600 psi @
28 days
Placement Date: Unknown
Date Tested: 06/08/09
Specified Length: 8
Sampled B B
p y: arty Cuble
Drill Directions: Vertical
Date Core Obtained: 06/03/09
Date Ends Trimmed: 06/05/09
Moisture Conditioning History:
According
to ASTM C -42
Laboratory Test Data
Cored
Trim
Capped
Com p.
Core
Length
Length
Length
Diam.
Area Length / Max Load
Corr.
Strength
ID Location
(in)
(in)
(in)
(in)
(sq in) Diam. Ratio (Ibs)
Factor
(psi)
1 Core 1, see Comments
8.3
7.4
7.6
3.76
11.10 2.02 73450
1.000
6610
2 Core 2, see Comments
9.0
4.8
5.1
3.76
11.10 1.36 78590
0.943
6670
Fracture
Density
Type
(pcf)
2
151.8
2
150.3
Comments: CORE LOCATIONS:
Core 1, Eastbound Park Lane at Coppell Road, 15' west and 8' south of the northwest corner of the intersection.
Core 2, Westbound Park Lane at Coppell Road, 5' west and 20' south of the northwest comer of the intersection.
Services:
Terracon Rep.: Barry Cuble
Reported To:
Contractor: Tiseo
Report Distribution:
(1) City of Coppell TX (1) Huitt Zollars Inc
(1) Tiseo Paving Company
Test Methods: ASTM C39, ASTM C42, ASTM C174, ASTM C617
Reviewed By:
v J. leveland, P.E.
Senior Project Engineer
The tests were performed in general accordance with applicable ASTM, AASHTO, or DOT test methods. This report is exclusively for the use of the client indicated above and shall not be reproduced except in
full without the written consent of our company. Test results transmitted herein are only applicable to the actual samples tested at the location(s) referenced and are not necessarily indicative of the properties of
other apparently similar or identical materials.
CR0004, 4 -30 -09 R�,2 Page I of 1