ST0003-LR090106F IELD DENSITY TEST REPORT
Wet
Water
Report Number: 94081163.0028
Dry Unit
irerracon
Lift / Mat. Depth
Density
Content
Content
Service Date: 12/18/08
8901 Carpenter Frwy, Ste 100
Report Date: 01/06/09
Dallas, TX 75247
(pef)
214- 630 -1010
Client
Project
City of Coppell TX
Coppell Road - #ST00 -03
Attn: Albert Samaniego
Sandy Lake Road to
Engineering Dept
Cooper Lane
PO Box 9478
Coppell, TX
Coppell, TX 75019
Project Number: 94081163
Material Information
Lab Test Data Project Requirements
Optimum Max. Lab
Water Dry Unit Water Minimum
Mat. Proctor
Laboratory Content Weight Content Compaction
No. Ref. No. Classification and Description
Test Method ( %) (PC) ( %) ( %)
1 94081 163.0003 Reddish brown sandy clay
ASTM D698 12.6 116.0 0/ +4 95
Field Test Data
Test
No.
54
55
Test Location
Storm Sewer Line B
Probe
Wet
Water
Water
Dry Unit
Percent
Lift / Mat. Depth
Density
Content
Content
Weight
Compaction
Elev. No. (in)
(pcf)
(pef)
( %)
(pef)
( %)
Sta. 48 +50 4' bfg 1 6 1303 14.9 12.9 115.4 99
Sta. 48 +50 3' bfg 1 6 130.2 15.2 13.2 115.0 99
Datum: bfg = below final grade Gauge 1D: 35366
Comments: Test results on this report meet project requirements as noted above.
Services: Perform in -place density and moisture content tests to determine degree of compaction and material moisture
condition.
Terracon Rep.: Armando Rendon Started: 0630
Reported To: Contractor Finished: 0830
Contractor: Tiseo
Report Distribution:
(1) Ci)p ul' Coppell Tx (i) Fluid z°iiirs Inc Reviewed By:
(1) Tiseo Paving Company W6 J. qleveland, P.E.
Senior roject Engineer
Test Methods: ASTM D6938
The tests were performed in general accordance with applicable ASTM, AASHTO, or DOT test methods. This report is exclusively f r the use of the client
indicated above and shall not be reproduced except in full without the written consent of our company. Test results transmitted herei are only applicable to the
actual samples tested at the location(s) referenced and are not necessarily indicative of the properties of other apparently similar or identical materials.
Page 1 of 1