ST0701-LR100203CONCRETE COMPRESSIVE STRENGTH TEST REPORT
Report Number: 94091 194.0018 Irerracan
Service Date: 01/19/10 8901 Carpenter Frwy.
Report Date: 02/03/10 Revision 1 Dallas, TX 75247
214 - 630 -1010 Reg No: F -3272
Client Project
PacTrust Pacific Realty Associates LP Southwestern Boulevard
Attn: Matthew Oyen Grapevine Creek to Beltline Road
15350 Southwest Sequoia Pkwy Ste 300 Coppell, TX
Portland, OR 97224
Project Number: 94091194
Material Information Sample Information
Specified Strength: 4,000 psi @
28 days
Sample Date:
01/19/10 Sample Time:
1448
Sampled By:
Barry Cuble
Mix ID: 1701
Weather Conditions:
Partly sunny, light breeze
Supplier: Lattimore
Accumulative Yards:
6 Batch Size (cy):
6
Batch Time: 1402
Plant:
7
Placement Method:
Direct Discharge
Truck No.: 5030
Ticket No.:
7213987
Water Added Before (gal):5
Water Added After (gal): 0
Field Test Data
Sample Location:
See Placement Location
Test
Result
Specification
Placement Location:
Inlet at B /5, Sta. 0 +29
Slump (in):
3
3 -5
Air Content ( %):
4.4
3 -6
Concrete Temp. (F):
71
Ambient Temp. (F):
70
Plastic Unit Wt. (pcf):
149.4
Laboratory Test Data
Age at
Maximum Compressive
Set Specimen Diameter
Area
Date
Date Test
Load Strength
Fracture
No. ID
(in)
(sq in)
Received
Tested (days)
(lbs) (psi)
Type
1 1
6.00
28.27
01/20/10
01/26/10 7
120,610 4,270
2
1 2
6.00
28.27
01/20/10
02/02/10 14
135,630 4,800
2
l 3
6.00
28.27
01/20/10
02/16/10 28
1 4
6.00
28.27
01/20/10
02/16/10 28
Comments:
Samples Made By: Terracon
Services: Obtain samples of fresh concrete at the placement locations, perform required field tests and cast compressive strength
samples.
Terracon Rep.: Barry Cuble Started: 1330
Reported To: Finished: 1600
Contractor: Lacy Construction
Report Distribution:
(I) PacTNst Pacific Realty Associates LP (1) City orCoppell TX Reviewed By:
(1) City orCoppell TX (2) Halff Assoc Inc
(1) Lacy Constnlction
Test Methods: ASTM C 31, ASTM C39, ASTM C138, ASTM C143, ASTM C172, ASTM C231, ASTM C1064, ASTM C1231
The tests were performed in general accordance with applicable ASTM, AASHTO, or DOT test methods. This report is exclusively for the use of the client
indicated above and shall not be reproduced except in full without the written consent of our company. Test results transmitted herein are only applicable to the
actual samples tested at the location(s) referenced and are not necessarily indicative of the properties of other apparently similar or identical materials.
CR0001, 5-21-09, Rev.7
Page 1 of 1