MA1001-CS100506
(6/29/2010) George Marshall - RE: MA10-01 DT&SL IntersectionPage 1
From:
"Bill Asher" <basher@nema3electric.com>
To:
"George Marshall" <gmarshall@coppelltx.gov>
Date:
5/6/2010 8:34 AM
Subject:
RE: MA10-01 DT&SL Intersection
George,
Mike has plans to contact the Oncor rep today.
He will check with Redick that if the conductors are placed in rigid
that the trench can be shallow.
Bill
-----Original Message-----
From: George Marshall [mailto:gmarshall@coppelltx.gov]
Sent: Thursday, May 06, 2010 8:19 AM
To: Bill Asher
Subject: RE: MA10-01 DT&SL Intersection
Bill, Could you pass this along to Mike... I just spoke with Larry
Redick with Oncor Cell 972-890-3479. He mentioned that the conduit will
need to be 24" deep to the top of the conduit. It would not hurt to
contact him to discuss.
Thank You, George
George Marshall, PE
City of Coppell
Engineering
972-304-3562
>>> "Bill Asher" <basher@nema3electric.com> 5/5/2010 11:13 AM >>>
Will do!
-----Original Message-----
From: George Marshall [mailto:gmarshall@coppelltx.gov]
Sent: Wednesday, May 05, 2010 10:14 AM
To: Bill Asher
Subject: MA10-01 DT&SL Intersection
Mike,
Please find attached a pdf of the design plans. I was talking this over
with some folks in the office and they mentioned that Oncor would
typically run the cable to the new meter but we would need to run the
conduit. So I think we would need a itemized/detailed bid.
If you have any other questions please contact me.
Thank You, George
George Marshall, PE
City of Coppell
Engineering
(6/29/2010) George Marshall - RE: MA10-01 DT&SL IntersectionPage 2
972-304-3562