ST0301A-CS100723
Page 1 of 1
Keith Marvin - Bethel Rd - 8" Siphon line
From: "Dean Dumke" <deand@JRJPaving.com>
To:"Keith Marvin" <KMARVIN@coppelltx.gov>, "Butch Cross" <butchc@JRJPaving.com>,
"Marty Murphy" <Martym@JRJPaving.com>
Date: 7/23/2010 9:38 AM
Subject: Bethel Rd - 8" Siphon line
CC:"Scott Latta" <slatta@coppelltx.gov>, "Zach Fusilier" <zfusilier@ntexcon.com>,
<mbradford@ntexcon.com>, "Andy Nord" <andy@ntexcon.com>
Keith & Scott,
I have met with Ted on site along with Larry Davis regarding drilling thought the 8” siphon. It has been
determined that we are to not drill through the 8” line coming from siphon, but move the drill shaft to the north to
avoid both the 6” and 8” lines coming from siphon box. By doing this, this will add additional footage to the 12”
pipe so that connections on both ends can be made. Ted spoke with Glenn and Glenn agreed this needed to
happen this way. Ted is having Public Works shut off the 8” valve from 8am-2:30pm so that it will allow us to drill
and pour the 2 drill shafts. After 2:30pm valve will be reopened.
Thank you,
Dean Dumke
Sr Project Manager
#469-223-7879
JRJ PAVING, L. P.
_______________________
file://C:\Documents and Settings\radloo\Local Settings\Temp\XPgrpwise\4C496312City_o...8/19/2010
Page 1 of 1
Keith Marvin - Bethel Road Siphon
From: Glenn Hollowell
To: Ken Griffin
Date:7/23/2010 9:07 AM
Subject:Bethel Road Siphon
CC: Keith Marvin
Ken,
Ted has been meeting with the contractor and Larry about an issue on the new aerial sewer crossing next to the
bridge on Bethel. The plans call for the contractor to drill through the existing 8" line on the siphon. Ted and the
contractor were both afraid that they might take out the 6" siphon line as well. They have made the decision
to shift the new piers for the new aerial crossing 2.5' to the north. This way, they should miss both of the
existing siphon lines. The only down side that I can see to this plan is that it could cost us a few extra feet of
sewer line on the new aerial crossing.
Just wanted to keep you informed of what was going on.
Thanks, Glenn
file://C:\Documents and Settings\radloo\Local Settings\Temp\XPgrpwise\4C495BD6City_...8/19/2010