ST0701-CS090622
(9/7/2010) Keith Marvin - RE: Belt Line, Southwestern, Denton TapPage 1
From: Keith Marvin
To:Sherman, Keri
CC:Birdsall, Per; Dimatteo, Joseph; Jones, Bryan
Date: 6/22/2009 1:08 PM
Subject: RE: Belt Line, Southwestern, Denton Tap
Attachments:BL DT SW 7.pdf
Keri,
Thanks for getting these to me. I see two changes that need to be made. First the street name designations (RD & BLVD)
should be 3" rather than 4". This will look better with the smaller overall letters.
Second, the sign for southbound Denton Tap is laid out incorrectly. This is the one with Southwestern on Top, and Belt
Line on the bottom. The arrows are flipped, and the hundred block should be 100 E.
I'm attaching the .PDF file sent by Per last week for reference. Please note that the comment above is for the last sign in
this file.
Please feel free to call me with any questions or discussion.
Thanks again.
Keith
Keith Marvin, P.E.
Project Engineer
(972) 304-3681
>>> Keri Sherman <ksherman@accordindustries.com> 6/22/2009 12:04 PM >>>
Good Afternoon Keith
Attached are the layouts for 8 x 24. If you have any questions please feel free to contact me.
Thank You
Keri Sherman
Schedule/Production Coordinator/ Inside Sales Representative
Southern Manufacturing
Office Hours Monday-Friday 6:30am to 3:30pm
407-894-8851 EX 412
407-894-5373 Fax
ksherman@accordindustries.com
-----Original Message-----
From: Per Birdsall [mailto:pbirdsall@ci.coppell.tx.us]
Sent: Friday, June 19, 2009 6:19 PM
To: Keri Sherman
Cc: Art Carter; Joseph Dimatteo; lestrammel@aol.com; Keith Marvin
Subject: Fwd: Belt Line, Southwestern, Denton Tap
Attached are our drawings for the last four signs that have two names on each sign. I am soon to be out of town for a
couple of weeks. Keith Marvin in our Engineering office has agreed to review your drawings once they are created. His
email is kmarvin@ci.coppell.tx.us and he can be reached at 972-304-3679. Keith has been working closely with this project.
Please copy me on the transmittals also.
As mentioned earlier, the arrows really should have a stroke width similar to the letters.
(9/7/2010) Keith Marvin - RE: Belt Line, Southwestern, Denton TapPage 2
Thank you for your patience and continuing cooperation in getting this project complete.
Thank you, Per
Per Birdsall, Traffic Control / Streets Operations Manager
City of Coppell
816 S. Coppell Rd.
P.O. Box 9478
Coppell, Texas 75019
972-462-5150
972-462-5199
pbirdsall@ci.coppell.tx.us
(8/30/2011) Keith Marvin - Re: Fwd: Belt Line, Southwestern, Denton TapPage 1
From: Keith Marvin
To:Birdsall, Per
CC:Latta, Scott
Date: 6/18/2009 4:31 PM
Subject: Re: Fwd: Belt Line, Southwestern, Denton Tap
Yeah, they look good. The two things we talked about were the RD and BLVD line up with the top of the name above, and
the bottom of the name below. Also the hundred blocks and RD/BLVD don't line up from top to bottom due to the arrows.
I'm not sure either of these can be fixed in such a way that something else doesn't get messed up.
Overall I think they are ready to go. I would still like to have them send a proof before they make the sign.
Keith
>>> Per Birdsall 6/18/2009 3:59 PM >>>
The drawings look great to me. I wanted one more set of eyes on it before I sent it on to Southern.
>>> Scott Latta 6/18/2009 8:23 AM >>>
Attached in .pdf format. Let me know if any changes are necessary.
Thanks,
Scott
óÐÐÇÏÓÎÛÈ×Ø éÈÊ××È éÓÕÎ ø×ÉÓÕÎÉ
øÓÏ×ÎÉÓÍÎÉ úÛÉ×Ø ÍÎ æ×ÎØÍÊ ï×ÛÉÇÊ×Ï×ÎÈÉ
ùÓÈà ÍÖ ùÍÌÌ×ÐÐ ìÊÍÒ×ÙÈ èê
48
0
1 INCH = FT.
8
Created on: 06 May 2009 by Scott Latta
Created in LDDT
S:\CAD\In_Design\TR08-02\dwg\SIGN LOCATIONS.dwg\BL DT 7
óÐÐÇÏÓÎÛÈ×Ø éÈÊ××È éÓÕÎ ø×ÉÓÕÎÉ
øÓÏ×ÎÉÓÍÎÉ úÛÉ×Ø ÍÎ æ×ÎØÍÊ ï×ÛÉÇÊ×Ï×ÎÈÉ
ùÓÈà ÍÖ ùÍÌÌ×ÐÐ ìÊÍÒ×ÙÈ èê
48
0
1 INCH = FT.
8
Created on: 06 May 2009 by Scott Latta
Created in LDDT
S:\CAD\In_Design\TR08-02\dwg\SIGN LOCATIONS.dwg\BL DT 7
óÐÐÇÏÓÎÛÈ×Ø éÈÊ××È éÓÕÎ ø×ÉÓÕÎÉ
øÓÏ×ÎÉÓÍÎÉ úÛÉ×Ø ÍÎ æ×ÎØÍÊ ï×ÛÉÇÊ×Ï×ÎÈÉ
ùÓÈà ÍÖ ùÍÌÌ×ÐÐ ìÊÍÒ×ÙÈ èê
48
0
1 INCH = FT.
8
Created on: 06 May 2009 by Scott Latta
Created in LDDT
S:\CAD\In_Design\TR08-02\dwg\SIGN LOCATIONS.dwg\BL SW 7
óÐÐÇÏÓÎÛÈ×Ø éÈÊ××È éÓÕÎ ø×ÉÓÕÎÉ
øÓÏ×ÎÉÓÍÎÉ úÛÉ×Ø ÍÎ æ×ÎØÍÊ ï×ÛÉÇÊ×Ï×ÎÈÉ
ùÓÈà ÍÖ ùÍÌÌ×ÐÐ ìÊÍÒ×ÙÈ èê
48
0
1 INCH = FT.
8
Created on: 06 May 2009 by Scott Latta
Created in LDDT
S:\CAD\In_Design\TR08-02\dwg\SIGN LOCATIONS.dwg\BL SW 7