SW0801-LR101216I� fiLLI ry
OEOTECHNICML
GROUr
Consulting Engineering * Ceotechnical Engineering * Construction Materials
3228 Halifax Street, Suite A, Dallas, Texas 75247
Phone: (972) 444 -8889 Fax: (972) 444 -8893
Acct ID: 1770
File No: C10 -1036
Date Sampled: 12/07/2010
Report Date: 12/16/2010
Sampled By: Wingerd, Pierce
Project: Sidewalk Improvements
By Order Of: Larry Davis
Location: Entrance into United Community
Bank on Denton Tap. S. of
Order Number: 1770
Sandy Lake Rd
Number of
Client: The City of Coppell
Specimens: 4
REPORT: REPORT OF CONCRETE COMPRESSIVE STRENGTH TEST
LAB NO: 95634
Material: CONCRETE
Test Method: See Below
TEST RESULTS
Report No: 95634
Page 1 of 1
Maximum
Compressive Average
Spec Age Tested Diameter Area
Load Cure
Strength Strength
Nbr (days) (in) (in')
(lbs) Break Type LOG
(PSI) (PSI) Comments
A 7 4.00 12.57
67,965 Type 2 Lab
5,410 5,410
B 28 4.00 12.57
Lab
C 28 4.00 12.57
Lab
D
HOLD (see remarks) -
_IEf_til
C� (111
�_ I
r`11
C_
[_1111__
l
I __I
Type 1
Type 2 Type 3 Type 4
_` ----
Type 5 Type 6
Specification: 3,600 psi @ 28 days
Date Received: 12/08/2010
Slump: 4.0 Inches
Transported By: Redi -Mix
Curing Method: Standard
Air Content: 3.6%
Source /Sampled At: Truck / Center
Time Sampled: 10:50 am
Plant: Redi -Mix - Plant #259
Temp.: Ambient: 53 °F Mix: 61 °F
Mix Code: 1 01_1 1504
Truck/Ticket No: 1375 / 25275848
Quantity Represented: 10 cu. yds.
Remarks:
Test Method (As Applicable): Unless noted, concrete was sampled and tested in accordance with ATM C172, C143, C231 or C173,
C1064 and C138. Compressive strength tests per ASTM C39.
Orig: The City of Coppell (Coppell, TX) Attn: Mr, Larry Davis (1 -cc copy)
Respectfully Submitted,
Alliance Geotechnical Group
Perry C. Kakara, Sr. Project Manager
THIS REPORT APPLIES ONLY TO THE STANDARDS OR PROCEDURES INDICATED AND TO THE SAMPLE(S) TESTED AND /OR OBSERVED AND ARE NOT NECESSARILY INDICATIVE OF
THE QUALITIES OF APPARENTLY IDENTICAL OR SIMILAR PRODUCTS OR PROCEDURES, NOR DO THEY REPRESENT AN ONGOING QUALITY ASSURANCE PROGRAM UNLESS SO
NOTED. THESE REPORTS ARE FOR THE EXCLUSIVE USE OF THE ADDRESSED CLIENT AND ARE NOT TO BE REPRODUCED WITHOUT WRITTEN PERMISSION.
Acct ID: 1770
Consulting Engineering * Geotechnical Engineering * Construction Materials
3228 Halifax Street, Suite A, Dallas, Texas 75247
Phone: (972) 444 -8889 Fax: (972) 444 -8893
File No: C10 -1036
Report Date: 12/16/2010 Previously Reported: 11/29/2010
Project: Sidewalk Improvements
Location: N.bound Denton Tap sidewalk from 220 Denton Tap to Braewood
Dr.
Client: The City of Coppell
REPORT: REPORT OF CONCRETE COMPRESSIVE STRENGTH TEST
Date Sampled: 11/17/2010
Sampled By: Wingerd, Pierce
By Order Of: Larry Davis
Order Number: 1770
Number of
Specime 4
LAB NO: 95002
Material: CONCRETE
Test Method: See Below
TEST RESULTS
Report No: 95002
Page 1 of 1
Maximum
Compressive Average
Spec Age Tested Diameter
Area
Load
Cure
Strength Strength
Nbr (days) (in)
(in 2)
(Ibs)
Break Type Loc
(PSI) (PSI) Comments
A 7 4.00
12.57
41,990
Type 2 Lab
3,340 3,340
B 28 4.00
12.57
59,395
Type 2 Lab
4,730
C 28 4.00
12.57
59,485
Type 2 Lab
4,730 4,730
D
HOLD (see remarks) -
I \-.7 I
�Tli
Type 1
Type 2
Type 3 Type 4
Type 5 Type 6
Specification: 3,000 psi @ 28 days
Date Received: 11/18/2010
Slump: 5.5 Inches
Transported By: Redi -Mix
Curing Method: Standard
Air Content: 4.2%
Source /Sampled At: Truck / Center
Time Sampled: 12:15 pm
Plant: Redi -Mix - Plant #P136
Temp.: Ambient: 68 °F Mix: 75 °F
Mix
Code: 10J11504
Truck/Ticket No: 1168 / 25269365
Quantity Represented: 10 cu. yds.
Remarks: *Slump exceeds specifications
Test Method (As Applicable): Unless noted, concrete was sampled and tested in accordance with ATM C172, C143, C231 or C173,
C1064 and C138. Compressive strength tests per ASTM C39.
Ong: The City of Coppell (Coppell, TX) Attn: Mr. Larry Davis (1 -cc copy)
Respectfully Submitted,
Alliance Geotechnical Group
Perry C. Kakara, Sr. Project Manager
THIS REPORT APPLIES ONLY TO THE STANDARDS OR PROCEDURES INDICATED AND TO THE SAMPLE(S) TESTED AND /OR OBSERVED AND ARE NOT NECESSARILY INDICATIVE OF
THE QUALITIES OF APPARENTLY IDENTICAL OR SIMILAR PRODUCTS OR PROCEDURES, NOR DO THEY REPRESENT AN ONGOING QUALITY ASSURANCE PROGRAM UNLESS SO
NOTED. THESE REPORTS ARE FOR THE EXCLUSIVE USE OF THE ADDRESSED CLIENT AND ARE NOT TO BE REPRODUCED WITHOUT WRITTEN PERMISSION.