ST0301A-CS100619
(1/21/2011) Keith Marvin - RE: Bethel Rd - N TX Mix Designs for Bethel Rd & WallsPage 1
From:
Caleb Thornhill <bct@freese.com>
To:
Dean Dumke <deand@JRJPaving.com>
CC:
Keith Marvin <kmarvin@coppelltx.gov>
Date:
6/19/2010 2:45 PM
Subject:
RE: Bethel Rd - N TX Mix Designs for Bethel Rd & Walls
Dean,
We can pull the North wall back 20 feet to the east. But, the alignment won't change. The only conflict
that I can see is the guy wire for the electric pole. I've revised the tree removal and it matches what we
talked about today.
Monday I'll get the following revised sheets out:
PV-2 (9 of 80)
GR-1 (14 of 80)
XS-1 (76 of 80)
XS-2 (77 of 80)
I noticed another utility pole out there that isn't in our survey (doesn't even show up on Google earth). We
are adding approximately 4 feet of fill at this location and we'll need to check with Oncor if there are any
clearance concerns.
I'll have our structures guys start reviewing these submittals. This is the first I've seen of them. 1 week is
pretty standard turn around for review time, but I'll try and get them back sooner. I realize you guys are
trying to meet deadlines, but these are submittals it seems we could've gotten weeks ago. I would
suggest talking with your subs and make sure there isn't other submittals they are needing approved that
have been misplaced on someone's desk.
If anything else comes up, let me know.
B. Caleb Thornhill, P.E.
Freese & Nichols, Inc.
214-217-2282
-----Original Message-----
From: Dean Dumke [mailto:deand@JRJPaving.com]
Sent: Saturday, June 19, 2010 12:31 PM
To: Keith Marvin; Caleb Thornhill
Cc: Kim Entrekin
Subject: FW: Bethel Rd - N TX Mix Designs for Bethel Rd & Walls
Attached is the mix design for approval for walls and bridge.
Dean
-----Original Message-----
From: Dean Dumke
Sent: Tuesday, June 15, 2010 3:27 PM
To: Kim Entrekin
Subject: Bethel Rd - N TX Mix Designs for Bethel Rd & Walls
Kim,
Attached is the mix designs for this project from North Texas Bridge.
Can I get you to send to Coppell for approval?
Thank you,
(1/21/2011) Keith Marvin - RE: Bethel Rd - N TX Mix Designs for Bethel Rd & WallsPage 2
Dean
-----Original Message-----
From: steve [mailto:steve@ntbridge.com]
Sent: Tuesday, June 15, 2010 2:53 PM
To: Dean Dumke
Subject: Fwd: Bethel Rd & Walls
Mix Designs for approval:
We request to substitute Class S for all Class C Mixes
We request to substitute Class A for Class B Riprap
Please forward and send me back a note that you "Got it"
Thanks
Steve Goodman
NTBC
By the way we have a water meter installed West of the bridge and the
water is free--so tell your men they can use it if needed--if you
happened to have a better 2" reducer install it!
-----Original Message-----
From: Emily Montgomery <emilym@lmctx.com>
To: "'steve@ntbridge.com'" <steve@ntbridge.com>
Date: Tue, 15 Jun 2010 14:35:22 -0500
Subject: Bethel Rd & Walls
Emily Montgomery
Lattimore Materials Company
972-529-7210
This electronic mail message is intended exclusively for the individual or entity to which it is addressed.
This message, together with any attachment, may contain the sender's organization's confidential and
privileged information. The recipient is hereby notified to treat the information as confidential and
privileged and to not disclose or use the information except as authorized by sender's organization. Any
unauthorized review, printing, retention, copying, disclosure, distribution, retransmission, dissemination or
other use of, or taking of any action in reliance upon, this information by persons or entities other than the
intended recipient is prohibited. If you received this message in error, please immediately contact the
sender by reply email and delete all copies of the material from any computer. Thank you for your
cooperation.