Fiber Ops-CS100426
(8/2/2011) Keith Marvin - Fwd: Re: Fiber - City Hall to FDPage 1
From: Keith Marvin
To:Birdsall, Per; Johnson, Brian
Date: 4/26/2010 11:47 AM
Subject: Fwd: Re: Fiber - City Hall to FD
Gentlemen,
I measured the distance between the closet in Station #3 and the box on the outside wall of Town Center (exterior wall
outside network room) at exactly 300 feet. Brian and I estimated 25 feet from this point to a wall mounted rack location,
and I estimate no more than 5 additional feet in the fire station for the vertical rise. This brings us to 330 feet. There are
two pull boxes along the route. I would order no less than 350 feet to ensure you have adequate slack along the way.
Let me know if you need anything else.
Keith
>>> Brian Johnson 4/26/2010 10:01 AM >>>
Keith, would you know the distance between Town Center and Fire Station #3? We're trying to get some fiber pulled into Town
Center through the fire station. I looked at a quote from the vendor who pulled fiber to the Aquatic Center, but he did not list the
individual distances. If you have any info that might help let me know.
thanks,
BJ
>>>
From: Per Birdsall
To:Brian Johnson
CC:James Loggins
Date: 4/26/2010 9:41 AM
Subject: Re: Fiber - City Hall to FD
Perhaps you know of earlier runs to the FD of any type or remember a few service vendors/contractors that may have done work
for us like this in the past. I could look through old purchase orders. I am currently estimating close to 600'. Per
>>> Brian Johnson 4/23/2010 4:56 PM >>>
Per, sorry for the late reply. I'm just estimating but I think the distance between our server room and the closet at the Fire
Station is about 300-350 ft. The quote that we got from our vendor who pulled fiber to the Aquatic Center just gave a total
measurement of about 2800 ft.; he didn't break down the individual measurements.
>>>
From: Per Birdsall
To:Brian Johnson
Date: 4/21/2010 1:22 PM
Subject: Fiber - City Hall to FD
I need to place an order for the run to City Hall if we are still considering that. I would think there would be a measurement on
an old PO for a run to the FD.
Thanks, Per