Loading...
Tax 2011B-LR130225a Po�� P Consulting Engineering * Geotechnical Engineering * Construction Materials 3228 Halifax Street, Suite A, Dallas, Texas 75247 Phone: (972) 444 -8889 Fax: (972) 444 -8893 Acct ID: 1770 File No: C12 -1001 01/29/2013 Curing Method: Date Sampled: 01/28/2013 Report Date: 02/25/2013 Previously Reported: 02/22/2013 2:25 pm Time Batched: Sampled By: Smith, Courtney Project: Vanbebber Drive Street Improvements 62 °F Mix: 64 °F By Order Of: Chris Location: Vanbetter Street intersection of Denton Tap Rd Order Number: 1770 Number of Client: City of Coppell Specimens: 5 REPORT: REPORT OF CONCRETE COMPRESSIVE STRENGTH TEST LAB NO: 141556 Material: CONCRETE Test Method: See Below Client PO: Q- 0612 -01 TEST RESULTS Report No: 141556 Page 1 of 1 Maximum Compressive Average Spec Age Tested Diameter Area Load Cure Strength Strength Tested Nbr (date : days) (in) (in 2) (Ibs) Break Type Loc (PSI) (PSI) By Comments A 01/31/13: 3 6.00 28.27 115,550 Type 5 Lab 4,090 4,090 B 02/04/13: 7 6.00 28.27 119,130 Type 2 Lab 4,210 C 02/04/13: 7 6.00 28.27 116,840 Type 2 Lab 4,130 4,170 D 02/25/13: 28 6.00 28.27 124,910 Type 3 Lab 4,420 E 02/25/13: 28 6.00 28.27 125,330 Type 3 Lab 4,430 4,4301l Type 1 Type 2 Type 3 Type 4 Type 5 Type 6 Specification Strength: Slump: 3 - 5 Air Content: 4 - 6 Date Received: 01/29/2013 Curing Method: Standard Time Sampled: 2:25 pm Time Batched: 1:01 pm Temp.: Ambient: 62 °F Mix: 64 °F Slump: 3.0 Inches Air Content: 5.0% Mix Code: 8274 Transported By: TXI Source /Sampled At: Truck / Center Plant: TXI - Plant #131 Truck /Ticket No: 1512 / 1590539 Quantity Represented: 10 cu. yds. at 30 cu. yds. placed of a 60 cu. yd. total placement Remarks: Test Method (As Applicable): Unless noted, concrete was sampled and tested in accordance with ASTM C31, C172, C143, C231 or C173, C1064 and C138. Compressive strength tests per ASTM C39. Client: City of Coppell Attn: Mr. Rick O'Dell (1 -cc copy) Ong: City of Coppell (Coppell, TX) Attn: Mr. Keith Marvin, P.E. Respectfully Submitted, Alliance Geotechnical Group Perry C. Kakara, CME Department Manager THIS REPORT APPLIES ONLY TO THE STANDARDS OR PROCEDURES INDICATED AND TO THE SAMPLE(S) TESTED AND /OR OBSERVED AND ARE NOT NECESSARILY INDICATIVE OF THE QUALITIES OF APPARENTLY IDENTICAL OR SIMILAR PRODUCTS OR PROCEDURES, NOR DO THEY REPRESENT AN ONGOING QUALITY ASSURANCE PROGRAM UNLESS SO NOTED. THESE REPORTS ARE FOR THE EXCLUSIVE USE OF THE ADDRESSED CLIENT AND ARE NOT TO BE REPRODUCED WITHOUT WRITTEN PERMISSION.