MA1006-CS110601 (3)
Michelle Matunas
From:Per Birdsall
Sent:Wednesday, June 01, 2011 4:36 PM
To:khiggins@paradigmtraffic.com
Cc:Brent Adams; Cody Wildoner; George Marshall
Subject:Re: Video & Loops
Thanks. That is the way I thought it should work. I heard from Mel's about Monday. You should prime your tech that this
is what will need to be done. All the video equipment will be there and the initial programming of the Naztec controller
with the new phase sequence will be ready. I'll have a tech there too if anything else is needed. Thanks again. Per -----
Original Message-----
From: "Keith Higgins" <KHiggins@paradigmtraffic.com>
To: Per Birdsall <PBIRDSALL@coppelltx.gov>
Sent: 6/1/2011 4:08:29 PM
Subject: RE: Video & Loops
Not a problem Per,
There are 16 logic ground/true inputs on the front of the tap. They are pins 1 -16
The outputs of the loops can be run from the detector panel into the input pins. Then in the detector file the inputs can
be tied with logic to the TS2 output pins and the inputs can be passed through the sdlc bus to the controller... is that
what you have in mind.
By the way, Johnny with Mel's scheduled for one of my guys to be at this Monday...
Thanks,
Keith Higgins
Field Service Manager
Paradigm Traffic Systems
817-247-6023
________________________________
1
From: Per Birdsall \[mailto:pbirdsall@coppelltx.gov\]
Sent: Wednesday, June 01, 2011 12:52 PM
To: Keith Higgins
Subject: Video & Loops
Hate to keep asking but I'll have a situation come Monday if not.
According to literature there are 16 TS1 inputs on the front of the TAP.
If I understood it, the pins would be 16 thru 32. The output from the detector rack would need to be routed to one of
these inputs? I need a little more step by step. Has this been done anywhere else?
Thanks, Per
Per Birdsall, Traffic Control / Streets Operations Manager City of Coppell
816 S. Coppell Rd.
P.O. Box 9478
Coppell, Texas 75019
972-462-5150
972-462-5199 fax
pbirdsall@coppelltx.gov
2