Fwd HN27 w ped button Valmont order 163171-P1can you review for approval?
Sent from my iPhone
Marty Murphy,
Business Manager
Begin forwarded message:
From: Mark Obarr <mark@melselectric.com
<mailto:mark@melselectric.com> >
Date: July 3, 2012 9:21:56 AM CDT
To: "Marty Murphy (martymjrj@gmail.com
<mailto:martymjrj@gmail.com> )" <martymjrj@gmail.com
<mailto:martymjrj@gmail.com> >, Per Birdsall <PBirdsall@coppelltx.gov
<mailto:PBirdsall@coppelltx.gov> >
Cc: Johnny Heine <johnny@melselectric.com
<mailto:johnny@melselectric.com> >
Subject: FW: HN27 w/ped button Valmont order 163171-P1
Please see attached rendering of the push button on the
decorative bases.(note: our button will be black) Please advise if this
is acceptable. At this time we are planning to install the push button
assemblies above the base for the Thursday turn on
Mark O'Barr
Mels Electric L.P.
Voice (972) 441-6208
Fax (972) 441-6394
6305 S. IH 45
PO Box 40
Wilmer, TX 75172
From: John Pipes [mailto:Johnp@s-steel.com]
Sent: Tuesday, July 03, 2012 9:14 AM
To: Mark Obarr
Subject: FW: HN27 w/ped button Valmont order 163171-P1
Mark
Please see below and attached from Valmont. Give
me a call when you have a chance and let me know your thoughts.
Thank you
John
From: McGill, Alison E. [mailto:alison.mcgill@valmont.com]
<mailto:[mailto:alison.mcgill@valmont.com]>
Sent: Tuesday, July 03, 2012 8:49 AM
To: John Pipes
Cc: McGill, Alison E.
Subject: FW: HN27 w/ped button Valmont order 163171-P1
Morning John,
Two of the developers went out and experimented with the ped
buttons and the deco base. They said this would be the easiest and
cleanest way to mount the ped buttons. There is an image attached.
Alison
From: Henry, Adam A.
Sent: Tuesday, July 03, 2012 8:11 AM
To: McGill, Alison E.
Subject: HN27 w/ped button
Alison,
Dean & I went out late yesterday and test fit a base with a ped
button. They will be able to just drill thru the flat of the flute and
attach the button w/o the back mtg. plate. It fit just fine, so we
won’t have to cut the bottom of the base. They will just have to locate
where needed on the base.
Adam Henry
Product Development Drafter
Valmont Industries, Inc.
(402) 359-2201 ext. 3062
The information contained in this E-mail message and the documents
accompanying this message are privileged and confidential, and may be
protected from disclosure. Please be aware that any use, printing,
copying,
disclosure or dissemination of this communication may be subject to
legal
restriction or sanction. If you think that you have received this
E-mail
message in error, please reply to the sender.
For more information about Valmont Industries, Inc., please visit our
web site
at www.valmont.com <http://www.valmont.com> .