Kyra Court-LR160831BOJNGE N C, I N E
8908 Ambassador Row, Dallas, TX 75247
3201 NE Loop 820, Suite 180, Fort Worth, TX 76106
1421 Wells Branch Pkwy, Suite 303, Pflugerville, TX 78660
11823 Starcrest Drive, San Antonio, TX 78247
Corporate Phone: (214) 630-9745
In -Place Density Service Order
Client: Report No.:
Project No.:
Project: Date of Service:
Contractor: Page: of
Requirements
Density & Moisture: ASTM D-6938 Gauge Manuf & Model: Troxler:
Density Standard Counts Current: Gauge Serial No.:
Density Standard Counts Previous: Moisture Standard Counts Current:1
Test Mode (DT/BS): Moisture Standard Counts Previous;
Probe Depth: 0, ' 2, 4, 6,' 8, 10, 12
Moisture/Density Relations
M/D Test Report
No: of Number
1
2
3
Material
Description
In -Place Density Test Results
Test Test M/D
No: Location No.
Moisture
MC„ Content DC
lbs
lbs
Remarks:
Optimum Maximum
Moisture Density
z
0
n
Density Percent
pcf Compaction
wet
dry
wet
dry
wet
dry
wet
dry
wet
dry
wet
dry _
wet
dry
wet
dry
% O F1
%
❑❑
0 11
% 11 n
% 0F1
Technician: Client Rep:
Time: Start: ' Stop: Contractor Notified of Results (Y / N)?
LI Mi'IATION S: The test results presented herein were prepared based upon the specific samples provided for testing. We assume no responsibility for variation in quality (composition, appearance, performance, etc.) or any
other feature of similar subject matter provided by persons or conditions over which we have no control. Our letters and reports are for the exclusive use of the clients to whom they are addressed and shall not be reproduced
except in full without the written approval of Rone Engineering Services, Ltd.
. %
lbs
lbs
lbs
lbs
%
lbs
lbs
lbs
lbs
Remarks:
Optimum Maximum
Moisture Density
z
0
n
Density Percent
pcf Compaction
wet
dry
wet
dry
wet
dry
wet
dry
wet
dry
wet
dry _
wet
dry
wet
dry
% O F1
%
❑❑
0 11
% 11 n
% 0F1
Technician: Client Rep:
Time: Start: ' Stop: Contractor Notified of Results (Y / N)?
LI Mi'IATION S: The test results presented herein were prepared based upon the specific samples provided for testing. We assume no responsibility for variation in quality (composition, appearance, performance, etc.) or any
other feature of similar subject matter provided by persons or conditions over which we have no control. Our letters and reports are for the exclusive use of the clients to whom they are addressed and shall not be reproduced
except in full without the written approval of Rone Engineering Services, Ltd.