Loading...
Duke Lesley 4C-CS170626 1705 CYPRESS STREET,HALTOM CITY, TX76117682-747-0879 TRU BY HILTON – COPPELL DALLAS UNDERGROUND QUESTIONS: PLEASE CONTACT Sean Stilley 817-271-1213 INDEX KNOWLEDGE EXPERIENCE SERVICE STORM: *Advance Drainage Systems Pipe & Fittings *Turner Curb Inlet *Turner Catch Basin *Aco Trench Drain WATER: *J-M Eagle C900 Pipe *Diamond C900 Pipe *PipeLife Jet Pipe C900 Pipe *Ipex Sch40 Pipe *J-M Eagle Sch40 Pipe *M&H MJxFLG & MjxMJ Gate Valves *M&H Hydrant *Tyler Domestic MJ Fittings *Star Domestic MJ Fittings *Star Domestic Mega Lugs *Ford Domestic Mega Lugs *Star Domestic Accessory Packs *Tyler Domestic Valve Box *EGW Flange Kits *Multi-Fittings Sch40 Fittings *Great Lakes Copper *Ford Meter Box Company Saddle & Brass Fittings SEWER: *J-M Eagle SDR35 Pipe *Diamond SDR35 Pipe *PipeLife Jet SDR35 Pipe *GPK/Indian Seal SDR35 Fittings *Multi Fittings SDR35 Fittings *Fernco CT Adapter *Bass & Hays 404 C/I Lateral Cleanout *Bass & Hays Meter Can *Bass & Hays VRM30 R&C *American Maatco Grade Rings *Wafer Check Valve *Argo Ball Drip *Storz Connection *Guardian Siamese Connection *WATTS Double Check Valve *WATTS In-building Riser 2 ADS, Inc. Drainage Handbook Specifications 1-3 _______________________________________________________________________________________________ ® ADS N-12 ST IB PIPE (per ASTM F2648) SPECIFICATION Scope This specification describes 4- through 60-inch (100 to 1500 mm) ADS N-12 ST IB pipe (per ASTM F2648) for use in gravity-flow land drainage applications. Pipe Requirements ADS N-12 ST IB pipe (per ASTM F2648) shall have a smooth interior and annular exterior corrugations. 4- through 60-inch (100 to 1500 mm) shall meet ASTM F2648. Manning’s “n” value for use in design shall be 0.012. Joint Performance Pipe shall be joined using a bell & spigot joint meeting ASTM F2648. The joint shall be soil-tight and gaskets, when applicable, shall meet the requirements of ASTM F477. Gaskets shall be installed by the pipe manufacturer and covered with a removable wrap to ensure the gasket is free from debris. A joint lubricant supplied by the manufacturer shall be used on the gasket and bell during assembly. Fittings Fittings shall conform to ASTM F 2306. Bell and spigot connections shall utilize a spun-on or welded bell and valley or saddle gasket meeting the soil-tight joint performance requirements of ASTM F 2306. Material Properties Material for pipe production shall be an engineered compound of virgin and recycled high density polyethylene conforming with the minimum requirements of cell classification 424420C (ESCR Test Condition B) for 4- through 10-inch (100 to 250 mm) diameters, and 435420C (ESCR Test Condition B) for 12- through 60-inch (300 to 1500 mm) diameters, as defined and described in the latest version of ASTM D3350, except that carbon black content should not exceed 4%. The design engineer shall verify compatibility with overall system including structural, hydraulic, material and installation requirements for a given application. Installation Installation shall be in accordance with ASTM D2321 and ADS recommended installation guidelines, with the exception that minimum cover in trafficked areas for 4- through 48-inch (100 to 1200 mm) diameters shall be one foot. (0.3 m) and for 60-inch (1500 mm) diameters, the minimum cover shall be 2 ft. (0.6 m) in single run applications. Backfill for minimum cover situations shall consist of Class 1 (compacted), or Class 2 (minimum 90% SPD) material. Maximum fill heights depend on embedment material and compaction level; please refer to Technical Note 2.02. Contact your local ADS representative or visit our website at www.ads-pipe.com for a copy of the latest installation guidelines. Pipe Dimensions Nominal Diameter, in (mm) Pipe I.D. 46810121518243036424854*60 in (mm) (100) (150) (200) (250) (300) (375) (450) (600) (750) (900) (1050) (1200) (1350) (1500) Pipe O.D.** 4.8 6.9 9.1 11.4 14.5 182228364248546167 in (mm) (122) (175) (231) (290) (368) (457) (559) (711) (914) (1067) (1219) (1372) (1549) (1702) Perforations All diameters available with or without perforations. *Check with sales representative for availability by region. **Pipe O.D. values are provided for reference purposes only, values stated for 12- through 60-inch are ± 1 inch. Contact a sales representative for exact values. ADS, Inc., August 2015 ADS, Inc. Drainage Handbook Specifications 1-4 ________________________________________________________________________________________________ ® N-12 ST IB (per ASTM F2648) JOINT SYSTEM (Joint configuration & availability subject to change without notice. Product detail may differ slightly from actual product appearance.) ADS, Inc., August 2015 ACO DRAIN PowerDrain - S300K iron edged channel system with slotted grate One meter channel F S 300 K S 300 K slot dimension 3.07” (78mm) slot dimension 4.51” (115mm) n DIN KL F900DIN KL F900 4 ‘PowerLok’ grate locking o devices per meter trench 0.71” (18mm) Half meter channel slot dimension i 39.37" (1 meter) 13.86” (352mm)19.69" (0.5 meter) 11.81” (300mm) t 14.76” (375mm) a SK3-0103 12.80” (325mm)11.81” (300mm) 16.73” (425mm) SK3-0203 toto 18.70” (475mm) SK3-0303 20.67” (525mm)19.69” (500mm) SK4-0303 20.67” (525mm) m r 6.30” (160mm) 14.25” (362mm) 1.73” (44mm) o f n Knock-outs included on every 5th channel B A I Type 903D In-line catch basin 22.67” (575.9mm) 14.25” (362mm) 19.69” (500mm) 11.81” (300mm) n o i 20.07” (510mm) t a L 37.64” (956mm) S J H M c F Q R N i P T K I O G Total capacity = 15.59 gallons f Outlet Ñ ow rates i Note:These are the pipe Ñ ow Outlet Product Outlet size Invert GPM CFS rates at the speci Ð ed outlet, (Sch. 40) Depth NOT channel Ñ ow rates.*Catch c Type 904D In-line catch basin basin Ñ ow rates are without Bottom outlet - SK3-006” round11.81”4210.94 A trash bucket - using trash Notes: e Bottom outlet - SK3-0406” round19.69”5441.21 bucket reduces Ñ ow. A 1. Riser can be cut dow in 1” (25mm) increments. Bottom outlet - SK3-0011.81” 8” round7481.67 B Bottom outlet - SK3-0408” round19.69”9662.15 B p 2. Maximum capacity including riser End outlet - SK3-006” round11.81”3640.81 C 27.82 gallons. End outlet - SK3-406” round19.69”5001.11 C S 3. Add 12” (300mm) to all heights if End outlet - SK3-108” round13.78”6811.52 D using riser. End outlet - SK3-408” round19.69”8631.92 D 49.63” (1260.8mm) 4. Outlet Ñ ow rates will be higher due End outlet - SK3-2010” round15.75”11162.49 E to increased depth - contact ACO Sales End outlet - SK3-40 10” round19.69”13042.91 E Of Ð ce for more details. Type SK3-903D4” round29.80”2870.64 F O Type SK3-903D4” round36.29”3190.71 G Type SK3-903D4” round28.22”2790.62 H Type SK3-903D6” round36.29”7071.57 I C End Cap Type SK3-903D4” round28.37”2800.62 J 0.20” (5mm) Type SK3-903D4” round34.87”3120.70 K A Type SK3-903D6” round29.15”6261.40 L Type SK3-903D4” round28.59”2810.63 M Type SK3-903D6” round36.28”7071.57 N Type SK3-903D4” round35.72”3160.70 O Type SK3-903D6” round35.72”7011.56 P Bell end to fit E Type SK3-903D8” round36.28”12372.76 Q 6”, 8” or 10” 20.47” (520mm) D Type SK3-903D6” round34.78”6901.54 Sch. 40 pipes R C Type SK3-903D4” round27.652760.61 S Type SK3-903D4” round34.363100.69 T 1.25” (32mm) www.ACODrain.us Apr 13/2 ACO DRAIN PowerDrain - S300K iron edged channel system with slotted grate F Invert Invert WeightWeight DescriptionPart No.DescriptionPart No. 2222 Inchesmmlbs.Inchesmmlbs. 1 SK3-28 Sloped channel - 39.37” (1m)17.32 440263.4 SK3-00 Neutral channel - 39.37” (1m)11.81 30072028 72041230.2 n SK3-29 Sloped channel - 39.37” (1m)17.52 445264.7 SK3-1 Sloped channel - 39.37” (1m)12.01 305230.2 72029 72001 1 SK3-30 Sloped channel - 39.37” (1m)17.72 450265.9 SK3-2 Sloped channel - 39.37” (1m)12.20 310231.4 72030 72002 o 1 SK3-030 Neutral channel - 39.37” (1m)17.72 450 SK3-3 Sloped channel - 39.37” (1m)12.40 315232.7 7200372046265.9 1 SK3-0303 Neutral channel - 19.69” (0.5m)17.72 450 SK3-4 Sloped channel - 39.37” (1m)12.60 320233.9 72049142.1 72004 i 1 SK3-31 Sloped channel - 39.37” (1m)17.91 455267.1 SK3-5 Sloped channel - 39.37” (1m)12.80 325235.1 7200572031 t SK3-32 Sloped channel - 39.37” (1m)18.11 460268.4 SK3-6 Sloped channel - 39.37” (1m)12.99 330236.4 72032 72006 SK3-7 Sloped channel - 39.37” (1m)13.19 335237.6SK3-33 Sloped channel - 39.37” (1m)18.31 465269.6 7200772033 a SK3-34 Sloped channel - 39.37” (1m)18.50 470270.8 SK3-8 Sloped channel - 39.37” (1m)13.39 340238.8 72034 72008 1 SK3-9 Sloped channel - 39.37” (1m)13.58 345240.0SK3-35 Sloped channel - 39.37” (1m)18.70 475272.1 7200972035 1 SK3-36 Sloped channel - 39.37” (1m)18.90 480273.3 SK3-10 Sloped channel - 39.37” (1m)13.78 350241.3 72036 72010 m 1 SK3-010 Neutral channel - 39.37” (1m)13.78 350 SK3-37 Sloped channel - 39.37” (1m)19.09 485274.5 72042241.372037 1 SK3-38 Sloped channel - 39.37” (1m)19.29 490275.7 SK3-0103 Neutral channel - 19.69” (0.5m)13.78 35072038 72045127.9 r SK3-11 Sloped channel - 39.37” (1m)13.98 355242.5SK3-39 Sloped channel - 39.37” (1m)19.49 495277.0 7201172039 1 SK3-40 Sloped channel - 39.37” (1m)19.69 500278.2 SK3-12 Sloped channel - 39.37” (1m)14.17 360243.7 72040 72012 o 1 SK3-13 Sloped channel - 39.37” (1m)14.37 365245.0 SK3-040 Neutral channel - 39.37” (1m)19.69 500 7201372048278.2 1 SK3-0403 Neutral channel - 19.69" (0.5m)19.69 500 f SK3-14 Sloped channel - 39.37” (1m)14.57 370246.2 72050150.3 72014 3 1 SK3-15 Sloped channel - 39.37” (1m)14.76 375247.4SK3-903D In-line catch basin - 19.69” (0.5m)94622 37.40 950151.4 72015 4 SK3-904D In-line catch basin - 19.69” (0.5m)94581 37.40 950161.4 SK3-16 Sloped channel - 39.37” (1m)14.96 380248.7 72016 n SK3-17 Sloped channel - 39.37” (1m)15.16 385249.9 72017 Series 600 Optional plastic riser- -10.0 99902 I SK3-18 Sloped channel - 39.37” (1m)15.35 390251.1 72018 Foul air trap - Ð ts both 910 & 610 basins 90854- -1.2 SK3-19 Sloped channel - 39.37” (1m)15.55 395252.4 72019 12" channel Universal end cap19.69 5002.5 96827 1 SK3-20 Sloped channel - 39.37” (1m)15.75 400253.6 72020 12" channel Installation device 97479- -4.9 1 SK3-020 Neutral channel - 39.37” (1m)15.75 400 72044253.6 Grate removal tool- -0.3 01318 n 1 SK3-0203 Neutral channel - 19.69” (0.5m)15.75 400 72047134.9 SK3-21 Sloped channel - 39.37” (1m)15.94 405254.8 72021 o SK3-22 Sloped channel - 39.37” (1m)16.14 410256.1 72022 i SK3-23 Sloped channel - 39.37” (1m)16.34 415257.3 72023 SK3-24 Sloped channel - 39.37” (1m)16.54 420258.5 72024 t 1 SK3-25 Sloped channel - 39.37” (1m)16.73 425259.7 72025 SK3-26 Sloped channel - 39.37” (1m)16.93 430261.0 72026 a SK3-27 Sloped channel - 39.37” (1m)17.13 435262.2 72027 Notes: c 1. This channel offers bottom knockout feature: 6” & 8” round. 2. Inverts shown are male end; for female invert depth subtract 5mm (0.2”) from male invert (except neutral channels where it will be same as male invert). i To calculate overall channel depth, add 25.4mm (1.0”) to invert depth. 3. Catch basin assembly includes polymer concrete top, PowerLok grate, trash bucket and plastic base. f 4. Catch basin assembly includes polymer concrete top, PowerLok grate, deep trash bucket, plastic riser and plastic base. 22 5. Water intake per meter channel is 136.6 in(881.29 cm) i Water absorption 0.07% the manufacturer to ensure maximum homogeneity c SpeciÐ cations Frost proof YESbetween polymer concrete body and edge rail. Each Salt proof YES edge rail shall be at least 1/4” (6mm) thick. e General Dilute acid and alkali resistant YES The surface drainage system shall be ACO Drain Grates PowerDrain S300K complete with slotted gratings The nominal clear opening shall be 12” (300mm) p Grates come in slotted ductile iron. Ductile iron to secured with ‘PowerLok’ locking as manufactured by with overall width of 13.86” (352mm). Pre-cast units ASTM 536-84 - Grade 65-45-12. After removal of ACO Polymer Products, Inc. or equal approved. shall be manufactured with either an invert slope of grates there shall be uninterrupted access to the 0.5% or with neutral invert and have a wall thickness S trench to aid maintenance. Materials of at least 0.67” (16mm). Each unit will feature a The trench system bodies shall be manufactured partial radius in the trench bottom and a male to Installation from polymer concrete with minimum properties as female interconnecting end pro Ð le. Units shall have The trench drain system shall be installed in follows:horizontal cast in anchoring keys on the outside accordance with the manufacturer’s installation wall to ensure maximum mechanical bond to the O instructions and recommendations. Compressive strength: 14,000 psi surrounding bedding material and pavement surface. Flexural strength: 4,000 psi The ductile iron edge rail will be integrally cast in by C A ACO Polymer Products, Inc. Southeast Sales OfÐ ce West Sales OfÐ ceFollow us on SPEC Northeast Sales Office 4211 Pleasant Road P.O. Box 12067 P.O. Box 245 Fort Mill, SC 29708 Casa Grande, AZ 85130 Chardon, OH 44024 Toll free: (800) 543-4764 Tel: (520) 421-9988 Tel: (440) 285-7000 Electronic Contact: Fax: (803) 802-1063 Toll Free: (888) 490-9552info@ACODrain.us Toll free: (800) 543-4764 www.ACODrain.us Fax: (520) 421-9899 Fax: (440) 285-7005 © April 10, 2013 ACO Polymer Products, Inc. This information is believed to be accurate but it is not guaranteed to be so. We cannot assume liability for results that buyer obtains with our product since conditions of use are beyond the control of the company. It is the customer’s responsibility to evaluate suitability and safety of product for his own use. ACO Polymer Products Inc. reserves the right to change the product and speci Ð cations without notice. www.ACODrain.us Apr 13/2 Rim: 534.6' Customer: FORTILINE WATERWORKS Invert: 525.27' Job Name: TRU BY HILTON - COPPELL Rim to Invert: 9.33' Job #: 17-32788 Precast Height: 8.50' Structure ID: 01 12" Overall Height: 10.00' Station: 0+41 Type: 48SA32 SalesPerson: MARTY ANDERSON 24" 1 0° 48" 2 270°90° 30" ENTERED BY 2 TRAVIS 6" 180° PRODUCTION CONTACT MIGUEL DescriptionUOMQuantityWeight 48" X 2' CONE 32" OPENINGEA11,400 48" X 4' RISEREA13,561 Pipe#ElevationPipeHole TypeAngleUp to Item 48" X 30" EXTENDED BASE W/INVERTEA16,369 Bottom 16M BOOTEA14 (1) 525.2712 PVC16M BOOT 00Base 8" PVC BOOTEA12 (2) 525.378 PVC8 PVC 2701.5Base 48" GASKETSEA24 600-232 16M BOOT CLAMPEA1 BOOT CLAMPEA1 Total Structure11,340 C900 : PVC Pressure Pipe SPECIFICATION DATA Diamond (C900) PVC Pipe (4” through 12”) is made of 12454 compound per ASTM D1784, in accordance with the dimensional, chemical, and physical requirements of AWWA C900. Diamond (C900) PVC Pipe bears the mark of NSF, International (NSF), the listing of Underwriters Laboratory, Inc. (UL), and (DR14 & DR18) bears the listing of Factory Mutual(FM). Diamond (C900) PVC Pipe utilizes a gasket, per ASTM F477, to seal the integral bell socket to the spigot of the next joint (which conforms to the requirements of ASTM D3139.) Each male end is beveled to facilitate joint assembly, and the spigot is referenced marked to ensure proper insertion depth. Diamond furnished lubricant is to be used in the joining process. Diamond C900 is supplied in 20 foot laying lengths. Factory Mutual Systems APPROVED Physical Properties of PVC 12454: Property ASTM Minimum Test Specific Gravity D792 1.40 Tensile Strength, psi D638 7,000 Tensile Modulus, psi D638 400,000 IZOD Impact Strength D256 .65ft., lb./in. SHORT FORM Specification for Diamond C900 PVC Water Pipe Diamond C900 PVC Water Pipe shall be made of compounds conforming to ASTM D1784 with a cell classification of 12454. Diamond C900 shall meet all the dimensional, chemical, and physical requirements as outlined in AWWA C900 and will be supplied in 20 foot laying lengths. Joints shall meet the requirements of ASTM D3139 and shall be formed using Rieber Technology. Gaskets shall meet the requirements of ASTM F477. Potable water pipe shall be manufactured from National Sanitation Foundation (NSF) approved compounds. Corporate Headquarters  1212 Johnstown Road  P.O. Box 1608  Grand Island, NE 68802-1608 DISTRIBUTION PIPE FOR THE 21st CENTURY page 6 six ™ BLUE BRUTE SUBMITTAL AND DATA SHEET 9 PIPE SIZE AVERAGE O.D. NOM. I.D. MIN. T. MIN. E APPROX. D APPROX. WEIGHT (IN)(IN)(IN)(IN)(IN)(IN)(LBS/FT) PRESSURE CLASS 165 psi (DR 25) 4 4.804.390.1925.255.571.9 6 6.906.310.2766.408.003.9 8 9.058.280.3627.0510.506.7 10 11.1010.160.4448.2012.8810.1 1 12 2 13.2012.080.5288.8015.3114.4 PRESSURE CLASS 235 psi (DR 18)* 4 4.804.230.2675.255.872.6 6 6.906.090.3836.408.435.3 8 9.057.980.5037.0511.069.2 10 11.109.790.6178.2013.5713.9 12 13.2011.650.7338.8016.1319.7 PRESSURE CLASS 305 psi (DR 14)* 4 4.804.070.3435.256.173.2 6 6.905.860.4936.408.876.7 8 9.057.680.6467.0511.6311.6 10 11.109.420.7938.2014.2717.6 12 13.2011.200.9438.8016.9725.1 ™ Consult JM Eagle for CSA and other listing availability prior to shipment. Note: *FM Approvals Pressure Class 150 psi for DR 18 and 200 psi for DR 14. * Contact your JM eagleTM sales representative for location availability. I.D. : Inside Dameter O.D. : Outside Diameter T. : Wall Thickness 9 D : Bell Outside Diameter E : Distance between Assembly Mark to the end of spigot. Product Standard:ANSI/AWWA C900 Pipe Compound:ASTM D1784 Cells Class 12454 Gasket:ASTM F477 Integral Bell Joint:ASTM D3139 JM Eagle™ also manufactures this pipe in green for sewer force main applications ANSI/NSF Standard 61 UL Standard 1285 requirements as our standard products. The only difference is that the pigment Pipe Length: 20 feet laying length used is green or purple. These products will not be marked with UL or NSF listing Installation:AWWA C605 marks. Additionally, the green pipe will be marked “Forced Sewer” and the purple ™ pipe will be marked: “Reclaimed Water... Do Not Drink.” JM Eagle Installation Guide PipeLife Jet Stream, Inc. Siloam Springs, AR 72761 479-524-5151 O 479-524-5464 F PVC 1120 P RESSURE P IPE AWWA Standard C900 Water Distribution Pipe FEATURES 1 Integral Gasket Joint - Easy Installation 2 Manufactured to meet the requirements of AWWA C900 3 NSF, UL and FM Approved (When Applicable) 4 Easy to order pallet quantities 5 Gaskets and lubricant included in price 6 12454 (Type 1, Grade 1, PVC 1120) material DR 18 - 150 PSI S SIZEIZE O O.D..D. MIN. WAMIN. WALL LL WEIGHT WEIGHT PIECES PIECES * * OORRDDERER T THICKNESSHICKNESS LB LBS/ S/ FFT.T. P PER PAER PALLLLETET U UNITNIT 4 4.800 .267 2.55 36 2.4 6 6.900 .383 5.29 18 3 8 9.050 .503 9.15 10 2.4 10 11.100 .617 13.82 4 2 12 13.200 .733 19.56 4/3 4 DR 14 - 200 PSI SIZE O.D. MIN. WALL WEIGHT PIECES * ORDER THICKNESS LBS / FT. PER PALLET UNIT 4 4.800 .343 3.22 36 2.4 6 6.900 .493 6.70 18 3 8 9.050 .646 11.55 10 2.4 10 11.100 .793 17.46 4 2 12 13.200 .943 24.75 4/3 4 * A palletized truckload of PipeLife Jet Stream, Inc. PVC Pipe equals a total of 48 order units. 22 Submittal Data Sheet Job or Customer: Engineer: Contractor: Submitted by: Date Approved by: Date Order No: Date Specification: introduction PVC is the most frequently specified of all thermoplastic piping materials. It has been used successfully for over 60 years. PVC is characterized by distinctive physical <STANDARDS > properties, and is resistant to corrosion and chemical attack by acids, alkalis, salt solutions and many other chemicals. It is attacked, however, by polar solvents such as ketones and aromatics. Of the various types and grades of PVC used in plastic piping, Type 1, Grade 1 PVC ASTM D1784ASTM D2467 (Cell Classification 12454) conforming to ASTM D1784, is the most common. The ASTM D1785ASTM D2464 ASTM D2665ASTM D2241 maximum service temperature for PVC is 140°F (60°C), under pressure. PVC for ASTM D2672ASTM D672 drainage applications is also capable of handling near boiling temperatures for ASTM F480ASTM F1970 ASTM D2466 intermittent flow conditions. With a hydrostatic design basis of 4,000psi at 73°F (23°C) and a design stress of 2,000psi at 73°F (23°C), PVC has the highest long-term hydrostatic strength of any other major thermoplastic material used for piping. NSF 14 NSF 61 Please see our listing on agency websites for NSF compliant pipe and fittings. www.nsf.org Toll Free: 800-463-9572 ipexna.com © 2016 IPEX DA-XIRTEC140-1 1 Submittal Data Sheet material properties PropertiesPVCStandards Specific gravity1.42ASTM D792 Tensile strength, psi at 73°F7,000ASTM D638 Modulus of elasticity tensile, psi at 73°F400,000ASTM D638 Flexural strength, psi14,500ASTM D790 Izod impact, ft.lbs./in. at 73°F, notched0.65ASTM D256 Compressive strength, psi9,000ASTM D695 Poissons ratio0.38 Working stress, psi at 73°F2,000 -5 Coefficient of thermal expansion in./in./°F (x 10)3ASTM D696 Linear expansion, in./10°F per 100' of pipe0.36 Maximum operating temperature under pressure140ºF (60ºC) Deflection temperature under load, °F at 66 psi173ASTM D648 Deflection temperature under load, °F at 264 psi160ASTM D648 2 Thermal conductivity, BTU.in./hr.ft.°F1.2ASTM C177 Burning rateSelf extinguishASTM D635 Burning classV-0UL-94 Flash ignition, °F730 Limited oxygen index (%)43ASTM D2863-70 Water absorption, %, (24 hrs. at 73°F)0.05ASTM D570 pipe availability Pipe Size Schedule 40 WhiteSchedule 40 GreySchedule 80 Grey 1/2" - 24"2" - 16"1/4" - 24" 2 SOLVENT WELD SUBMITTAL AND DATA SHEET PVC SOLVENT WELD - (SCHEDULE SERIES) Dual marking for both Pressure and Drain, Waste, Vent (DWV) Applications ™ JM EAGLE PVC SCHEDULE 40/DWV PIPE Listed : ANSI/NSF-PW NSF-DWV Specifications: ASTM D1785 & ASTM D2665 : : Standard 61, Standard 14 NOM. PIPE SIZE O.D.NOM. I.D. MIN. T. WATER PRESSUREAPPROX. WEIGHT (IN)(IN)(IN)(IN)(LBS/FT) 1/2 0.8400.6090.1096000.164 3/4 1.0500.8100.1134800.218 1 1.3151.0330.1334500.324 1-1/4 1.6601.3630.1403700.439 1-1/2 1.9001.5930.1453300.525 2 2.3752.0490.1542800.705 2-1/2 2.8752.4450.2033001.118 3 3.5003.0420.2162601.463 4 4.5003.9980.2372202.083 6 6.6256.0310.2801803.663 8 8.6257.9420.3221605.512 10 10.7509.9760.3651407.815 12 12.75011.8890.40613010.333 14 14.00013.0730.43713012.220 16 16.00014.9400.50013015.980 : : Standard Color: White, Standard Length 10’ & 20’, Plain End and Belled End Purple color for reclaim, contact your sales rep for availability ™ JM EAGLE PVC SCHEDULE 80 PIPE Specifications: ASTM D1785 : : Listed : ANSI/NSF-PW Standard 61, Standard 14 NOM. PIPE SIZE O.D.NOM. I.D. MIN. T. WATER PRESSUREAPPROX. WEIGHT (IN)(IN)(IN)(IN)(LBS/FT) 1/2 0.8400.5280.1478500.210 3/4 1.0500.7240.1546900.285 1 1.3150.9360.1796300.419 1-1/4 1.6601.2550.1915200.579 1-1/2 1.9001.4760.2004700.701 2 2.3751.9130.2184000.969 2-1/2 2.8752.2900.2764201.479 3 3.5002.8640.3003701.979 4 4.5003.7860.3373202.892 6 6.6255.7090.4322805.516 8 8.6257.5650.5002508.336 10 10.7509.4930.59323012.375 † 12 12.75011.2940.68723017.027 † : Standard Color: Dark Gray, Standard Length: 20’ overall, Product Standard:ASTM D1785 Pressure Pipe Plain End Only Pipe Compound:ASTM D1784 Cell Class 12454 ™ † Available in Western Region Only.Installation:JM Eagle Installation Guide I.D. : Inside Diameter O.D. : Outside Diameter T.: Wall Thickness SOLVENT WELD DWV AND SEWER FITTINGS – INCLUDING BACKWATER VALVES Description and Applications Multi Fittings offers a wide variety of molded DWV fittings 4" PRODUCT INFORMATION in diameter and larger.Solvent welded DWV fittings are typically installed in indoor sanitary and drainage systems. Some solvent weld fittings are used underground as well.For example, backwater valves should be installed on all building drainage pipes connected to sanitary or storm sewers in order to prevent damage caused by sewer backups. Applicable Standards ASTM D2665(6" & 8") NSF 14(6" & 8") CSA B181.2(6" & 8") Solvent Weld vs.Gasketed Joints Solvent welding is a process by which a joint is made by protect structures from the heavy damage that a sewer chemically fusing together a pipe and a fitting.A solvent is backup can inflict on a home or business.There are applied to the surface of a PVC pipe spigot, and the inside roughly 400,000 sewer backup incidents every year in of a matching bell.In some cases a primer may be used to North America.If more houses and buildings were prepare the surfaces.The solvent dissolves some of the equipped with backwater valves, the damage would be chemical bonds in the PVC material, effectively “melting”the significantly reduced.They are normally located on the material.Once the two surfaces are pushed together the main building drain to the sanitary or storm sewer. material from the two surfaces begins to fuse together.As the joint cures the solvent evaporates and the joint becomes Available Sizes stronger, until it essentially becomes a continuous pipe. Multi Fittings offers backwater valves both in PVC and ABS Solvent welded joints are able to resist large tensile loads, plastic in 3", 4" and 6" sizes.Backwater valves can be and will not pull apart.In fact, it can be shown that the pipe purchased either with or without a chimney. itself will fail before the joint. Gasketed joints are simply “push together”joints sealed by Standards and Codes a special rubber gasket or O-ring.While a gasketed joint IAPMO(3" & 4") can provide an extremely tight hydrostatic pressure seal, it typically cannot resist significant end loads – in other NSF-14 words, it can pull apart.For this reason, gasketed joints are typically used for buried applications where they are Southern Building Code (3" & 4") confined.For above ground installations, measures must be CSA B181.2 taken (such as supporting the system with brackets) to ensure that joints are not subjected to significant end loads. Short Form Specifications Available Configurations PVC DWV injection-molded 6" and 8" fittings shall conform to ASTM D2665 and be listed by NSF to Standard 14. Multi Fittings has one of the largest offerings of molded They shall conform to the requirements of CSA B181.2. DWV fittings 4" and larger.For a complete list and for engineering lay lengths, please visit www.multifittings.com. All building drains to both sanitary and storm sewers will be equipped with backwater valves certified to CSA B181.2, and approved by IAPMO, approved in the Backwater Valves Southern Building Code and will be listed to NSF-14. Backwater Valves are designed to protect buildings from Solvent cemented joints shall be assembled as shown in sewer backups.They allow flow in only one direction – out the Multi Fittings Installation Guide. of the house or building.They are an inexpensive way to 11 MULTI FITTINGS MUNICIPAL WATER AND SEWER SYSTEMS SCH. 40 DRAINAGE/DWV FITTING SPECIFICATIONS 1.0GPK PVC Schedule 40 drainage/DWV fittings shall be manufactured in accor- dance with either ASTM D2665 or F1866. The PVC material shall have a minimum cell classification of 12454-B as defined in ASTM D-1784. 2.0Thepurpose of GPK Schedule 40 Drainage/DWV in-line fittings is to convey and provide a drainage and venting of storm water runoff, municipal or industrial chemicals and wastes as well as many other commercial and agricultural appli- cations. The fittings are designed for non-pressure or low pressure applications up to 25 psi. 3.0Injection molded fittings are produced in sizes 4" through 8" diameter. Fabricated fittings are produced in sizes 4" through 24" diameter. A fabricated fitting is any fitting made from pipe or a combination of injection molded components and pipe. 4.0Chemical Resistance. GPK PVC fittings resist attack from many acids, alkalies, alcohol, salt solutions and other chemicals. Refer to chemical resistance chart for suitability. 5.0Dimensions: 5.1Socket Inside Diameters and socket depths shall comply with the values listed in ASTM D-2665 or F1866. 5.2Threadsshall be American National Standard Taper Pipe Threads (ANSI B1.20.1) which shall be gaged in accordance with ASTM Method D-2122. 5.3Gasketed Bell connections comply with ASTM D3212 and F477. 6.0Marking. GPK Schedule 40 Drainage/DWV fittings shall be marked with applicable size, SCH 40 DRAINAGE, company name and applicable ASTM Number (D2665/ F1866). The fittings and/or packaging shall also include the manufacturer's date and shift code. 7.0Installation. Fittings shall be installed in properly engineered piping systems in accordance with established procedures and standards. The assembly of solvent cemented joints shall be in accordance with ASTM Practice D-2855. For threaded ends, use teflon tape recommended by the manufacturer for use with plastics - DO NOT use oil based pipe joint compound. One to two turns beyond finger tight is generally acceptable. Overtightening may cause damage to either pipe or fitting. 7091 GPK FITTING SUBMITTAL SHEET Intro:GPK manufactures Schedule 40 drainage/DWV Fittings sizes 4" through 24" for non- pressure or low pressure applications up to 25 psi in accordance with ASTM D2665 or F1866. Material:GPK Schedule 40 Drainage/DWV Fittings are made from PVC material with a mini mum cell classification of 12454-B as defined in ASTM D-1784. Fabricated fittings are manufactured from PVC pipe meeting the requirements of ASTM D-2665 or D-1785. Dimensions:Dimensions and tolerances comply with those shown in Table 1 and Table 2 of D-2665 or Table 1, Table 2 and Table 3 of ASTM F1866. Pipe Stiffness:Extruded components exhibit a pipe stiffness which equals or exceeds the values shown in Table 3 of D-2665 when tested in accor dance with ASTM Method D-2412. Pipe Flattening:Extruded components are flattened as described in ASTM D1785 until the distance of the plates is 40% of the outside diameter of the pipe or the walls of the pipe touch, whichever occurs first. There shall be no splitting, cracking or breaking. Branch Bending:The chemically fused areas around the fabricated branches of tee and wye fittings are tested to STM F1866 to verify their strength and integrity. Impact Resistance:Fittings are tested in accordance with ASTM D-2444 using a 12 lb. or 20 lb. Tup A and a Flat Plate Holder B. Fabricated fitting shall withstand an impact equal to or exceeding 15 Ft.lbs. Marking:Fabricated fittings shall be marked on the body or hub with the manufacturer's name and trademark, "PVC", size, SCH 40 DRAINAGE, date. Joining Methods:Chemically Fused Solvent Welded Joints Solvent cement is handled and tested in accordance with ASTM D-2564 and D-2855. The Lap Shear Strength shall equal or exceed 900 psi @ 72 hours. Heat Fusion Welded Joints (Butt Fusion Welds) Elastomeric Seals (Gaskets) Meets all applicable requirements of ASTM F477 and D3212. Pressure/Pressure Deflection: Gasketed joints are tested in accordance with ASTM D3212. Solvent cement sockets are tested in accordance with ASTM D2672. Section 10.4 Socket Joint Tightness Test of 25psi. 2709 SUGGESTED SPECIFICATIONS (1 of 2) M&H AWWA C502 FIRE HYDRANTS Model 129 Traffic Model 250 PSI Working Pressure – 500 PSI Hydrostatic Test - AWWA UL / FM Approved _______________________________________________________________________________________ GENERAL Fire hydrants shall comply in all respects with AWWA Standard C-502, latest revision. Fire hydrants shall be of the compression type, with the main valve opening against the pressure and closing with the pressure. The main valve opening shall be (4 ½” or 5 ¼”) in diameter. Fire Hydrant shall be of a dry barrel, dry top design. The nozzle section shall consist of two (2) hose nozzles and one (1) pumper nozzle or other as specified. _______________________________________________________________________________________ RATING Fire hydrants shall be rated at 250 psi water working pressure, tested at 500 pounds hydrostatic for structural soundness in the following manner: 500 pound hydrostatic test supplied from the inlet side, first with the main valve closed for the testing of the valve seat: second, with the main valve open for testing of the drain valves and the hydrant barrel. Testing to be complete in accordance with AWWA C-502 and UL & FM requirements. _______________________________________________________________________________________ END Hydrants shall be connected to the main by a 4” or 6” fusion bonded, epoxy coatedmechanical joint or CONFIGURATION flanged shoe. Mechanical joint shoes shall be fitted with strapping lugs. _______________________________________________________________________________________ DESIGN The main valve seat of the hydrant shall be made of rubber and be supported by a one-piece bronze top plate / drain valve mechanism. Drain valve shall have replaceable rubber facings. The bottom stem threads of the main valve rod shall be fitted with an epoxy coated, cast iron bottom plate, sealing lower rod threads from the water. Changes in size or shape of the waterway (hydrant nozzles) shall be accomplished by means of easy curves. Exclusive of the main valve opening, the net area of the waterway of the barrel and the foot piece at the smallest part shall not be less than 120% of that of the net opening of the main valve. Hose and pumper nozzles shall be threaded and screwed into the nozzle section. And then mechanically locked to prevent turning. Hose and pumper caps shall be chained to the hydrant The hydrant shall be so designed that when it is in place, no excavation will be required to remove the main valve and movable parts of the drain valve. Further, the hydrant shall be of the type that can be extended without excavating. Hydrants shall be so designed that, in the event of accident, or breaking of the hydrant above or near grade level; the main valve will remain closed. The main valve rod shall be made in two parts and fitted with breakable coupling at the ground line flange. The ground line connection between nozzle section and the barrel shall incorporate the use of two traffic flange. This connection shall be so designed that the nozzle section can be rotated in any increment of 360. The ground line connection between the barrel and nozzle sections shall have a rubber o-ring gasket to provide a seal. The operating threads of the hydrant shall be so designed as to avoid the working of any iron or steel parts against either iron or steel. The operating stem and operating nut threads shall be square or acme type. September 2012 / M&H C502 / Model 129 SUGGESTED SPECIFICATIONS (2 of 2) . DESIGN The operating thread shall be lubricated at factory with food grade grease. Access shall be provided (Continued)to field lubricate the operating mechanism. The operating thread shall be sealed from water at all times when the valve is either in the opened or closed position. The operating rod shall be bronze sheathed where it passes through the double “O” ring seal in the bonnet. The bonnet shall be weather proof and utilize a weather shield integral with the external wrench operating nut. The operating nut shall be made of bronze with a self-lubricating design. Hydrants shall be of the dry barrel type and hydrant shoe shall have two positive acting non-corrosive drain valves that shall drain the hydrant completely by opening when the main valve is closed, and close tightly in accordance with AWWA C-502 requirements when main valve is open. The main valve assembly shall be seated in the hydrant with a bronze-to-bronze interface to facilitate removal of the main valve, should maintenance be required. The nozzle section shall consist of two-2 1/2” hose nozzles to the specified thread designation (NST or other, as specified) and one pumper nozzle 4 ½” in diameter to the specified thread designation (NST or other, as specified), or other combination of nozzle outlets, including independent hose gate valves, as specified. Two O-ring seals shall be utilized where the main hydrant rod passes through the 1 piece bonnet. Hydrant standpipe shall be ductile iron and single piece for all bury depths. All like parts of hydrants of the same size and model produced by the same manufacturer shall be inter- changeable. Hydrant shall open by turning to the (left or right). Direction of opening to be permanently marked on hydrant bonnet. Threads on hose and steamer nozzles shall be National Standard unless otherwise specified. Size and shape of operating nuts cap nuts shall conform to National Standard unless otherwise specified. Bury shall be (specify depth of bury) measuring depth from grade line to bottom of trench or connecting pipe. Auxiliary shut-off (isolation) gate valves, when required, shall be of the same manufacture as the hydrant. _______________________________________________________________________________________ COATING Hydrant shoes shall have an interior and exterior thermosetting epoxy coating of 5 to 6 mils meeting AWWA C550. Exterior of hydrant nozzle section shall be Fire Hydrant Red (or as specified). _______________________________________________________________________________________ MARKINGS Hydrant shall be marked with the name of the manufacturer, size of valve opening, direction of opening and the year of manufacture all in accordance with the AWWA C-502. Country of origin to be cast on all major hydrant castings. _______________________________________________________________________________________ SOURCE Hydrants shall be M&H Model 129 or approved equal September 2012 / M&H C502 / Model 129 Joint Restraint Submittal Form ® PVC Stargrip series 4000 Mechanical Joint Wedge Action Restraint for AWWA C900/C905 and IPS PVC Pipe SUBMITTAL INFORMATION PROJECT NAME: ENGINEER: CONTRACTOR: SPEC. SECTION: ® 6" PVC Stargrip Series 4000 for PVC Pipe MEMBER FEATURES & ADVANTAGES • The design eliminates tie rods and thrust blocks and has been proven in the market since 1992. (*transition gasket required on IPS • Can be used on 4"-12" AWWA C900, 14"-36" AWWA C905 PVC pipe or 3"-12" IPS PVC pipe* PVC Pipe 12" and under). • Listed with Underwriters Laboratories in sizes 4"-12" for use on DR18 class 235 C900 PVC pipe at 150 PSI. Approved by Factory Mutual Research in sizes 4"-12" for use on DR18 class 235 at 150 PSI and for sizes 4"-10" DR14 class 305 C900 PVC pipe at 200 PSI. • Tested to and meets the requirements of ASTM F1674 through 14" size for DR18 PVC pipe. • The safety factor is twice (2:1) the standardized pressure rating listed on Page 18 of the catalog. • ® • PVC Stargrip • Larger ID allows easier installation on out-of-round pipe. • • For use on HDPE or C909 pipe, please contact Star Engineering. MATERIAL SPECIFICATIONS: • Gland: Ductile Iron per ASTM A536, Grade 65-45-12 • Wedges: Ductile Iron per ASTM A536, Grade 65-45-12 GLAND FINISH OPTIONS (Please check one):HARDWARE OPTIONS (Please check): Standard: T-bolts are high strength low alloy steel Standard: alkyd enamel coating manufactured in accordance with ANSI/AWWA TM C111/A21.11-00 Optional: Starbond TGIC polyester powder coating applied by an electrostatic spray process Optional: T-bolts and nuts alloy SS 304 per ASTM F593 Optional: Other (specify) _____________________________ Optional: T-bolts and nuts alloy SS 316 per ASTM F593 COUNTRY OF ORIGIN OPTION (Please check one): Optional: T-bolts and nuts Fluoropolymer Star-Blue coated high strength low alloy steel manufactured Import in accordance with ANSI/AWWA C111/A21.11-00 1 100% Domestic 1 Domestic gland with import components 1 (Please see Domestic Restraint Options Available on our website.) REV.14-2 ® REGISTERED TRADEMARK OF STAR PIPE PRODUCTS ® STAR PIPE PRODUCTS HOUSTONCORPORATE TOLL FREE 1-800-999-3009 FAX 281-558-9000 www.starpipeproducts.com Page 1 Joint Restraint Submittal Form ® PVC Stargrip series 4000 Mechanical Joint Wedge Action Restraint for AWWA C900/C905 and IPS PVC Pipe TECHNICAL INFORMATION ® 6” PVC Stargrip Series 4000 for PVC Pipe ® PVC STARGRIP 4000 SPECIFICATIONS* IPS PIPE ODT-BOLTSAPPROX NOM.C900/C905WEDGES 1 (TRANSITION ØABCØDSIZEWT. Please SIZEPIPE CI OD(QTY) GASKET REQUIRED)(QTY)(LBS) check sizes: 3N/A3.504.097.698.50 3/45/8 (4)47 44.804.504.939.129.53 7/83/4 (4)49 66.906.637.0311.1211.63 7/83/4 (6)613 89.058.639.1813.3713.97 7/83/4 (6)617 1011.1010.7511.2315.6216.18 7/83/4 (8)823 1213.2012.7513.3317.8718.18 7/83/4 (8)828 1415.30N/A15.4520.7520.36 7/83/4 (10)1050 1617.40N/A17.5523.0022.46 7/83/4 (12)1260 1819.50N/A19.6525.2524.56 7/83/4 (12)1265 2021.60N/A21.7527.5026.66 7/83/4 (14)1476 2425.80N/A25.9532.0030.86 7/83/4 (16)1698 3032.00N/A32.1839.3836.821-1/81 (20)20173 3638.30N/A38.4846.2543.121-1/81 (24)24219 *All dimensions in inches except where indicated. 1 - dimension after assembly on pipe MAXIMUM WORKING PRESSURE RATING WITH OCCASSIONAL & RECURRING SURGES C900C905ASTM D2241 NOM. SIZE (IN) DR14DR18DR25DR18DR21DR25DR32.5SDR17SDR21SDR26 3250200160 4305235165250200160 6305235165250200160 8305235165250200160 10305235165250200160 12305235165250200160 14235200165125 16235200165125 18235200165125 20235200165125 24235200165125 30165125 36165125 REV.15.02 ® REGISTERED TRADEMARK OF STAR PIPE PRODUCTS ® STAR PIPE PRODUCTS HOUSTONCORPORATE TOLL FREE 1-800-999-3009 FAX 281-558-9000 www.starpipeproducts.com Page 2 SUBMITTAL INFORMATION Mechanical Joint Retainer (UFR1500-x-U style) 3" - 12" SERIES UFR1500 CIRCLE-LOCK MECHANICAL JOINT RESTRAINT FOR C900, C909 AND IPS PVC Ductile iron actuating screw, with the Auto-Tork break-away Safety stop insures ring segments can head design, insures proper torque during installation. never be over-tightened. Auto-TorkBolt Restraint Segment Gland body is of High Strength Ductile Iron per ASTM A536, Grade 65-45-12. Compatible with all mechanical joints Ring Segments are ductile Bolt Hole Cross Section conforming to ANSI / AWWA C111 / A21.11. iron per ASTM A536 and heat treated to a hardness of 370 FrontBack BHN minimum. S UBMITTED P2**P RESSURE R ATING N OM.N O. OF A PPROX. I TEM(S) C ATALOG P IPE O.D.R ESTRAINT W EIGHT P1*BCD N UMBER C900C909ASTM D2241 C900 S IZE S EGMENTS(LBS.) IPS C909 DR-18DR-14PC-235SDR-26SDR-21 3"3.50"UFR1500-3-U4911.50"9.00"6.19"4.06" -160 PSI200 PSI 4"4.50"-4.80"UFR1500-4-U41013.00"9.40"9.25"7.50"4.90"235 PSI305 PSI -160 PSI200 PSI 6"6.63"-6.90"UFR1500-6-U61415.13"11.60"11.65"9.50"7.00"235 PSI305 PSI235 PSI160 PSI200 PSI 8"8.63"-9.05"UFR1500-8-U61817.25"13.75"13.60"11.75"9.15"235 PSI305 PSI235 PSI160 PSI200 PSI 10"10.75"-11.10"UFR1500-10-U82519.38"16.00"15.85"14.00"11.20"235 PSI305 PSI235 PSI160 PSI200 PSI 12"12.75"-13.20"UFR1500-12-U82921.50"18.05"17.85"16.25"13.30"235 PSI305 PSI235 PSI160 PSI200 PSI *Maximum O.D. of gland on pipe before Auto-Tork heads are removed (as shipped). **Maximum O.D. of gland on pipe after Auto-Tork heads are removed. FEATURES ¤ Fits C900, C909 and ASTM D2241 IPS PVC ¤ Full circle contact and support of the pipe wall ¤ ÐAuto-TorkÑ actuating screws with heads specially designed to twist off at the correct installation torque, leaving a hex head in case future system maintenance or removal is required ¤ Restraining segments are mechanically retained in pockets ¤ Series 1500 eliminates the need to pour expensive and time consuming concrete thrust blocks ¤ UL/FM approved, 4"-12" nominal size C900 PVC, for use on listed and approved PVC pipe ¤ Gland, screws and segments are black epoxy coated using the e-coat process ¤ Gland colored red for identification purposes ¤ Ductile iron castings are manufactured, assembled, inspected and packaged in the U.S.A. The Ford Meter Box Company considers the information in this submittal form to be correct at the time of publication. Item and option availability, including specifications, are subject to change without notice. Please verify that your product information is current. Submitted By: The Ford Meter Box Company, Inc. P.O. Box 443, Wabash, Indiana U.S.A. 46992-0443 Phone: 260-563-3171 / Fax: 800-826-3487 Overseas Fax: 260-563-0167 http://www.fordmeterbox.com 03/01/12 Domestic Ductile Iron MJ Compact Fittings ANSI/AWWA C153/A21.53 MATERIAL: Ductile Iron per ASTM A536 PRESSURE: 350 PSI rating for 2" - 24" sizes, 250 PSI rating for 30" - 48" sizes and 150 PSI rating for 54" - 64" sizes TESTING: In accordance with ANSI/AWWA C153/A21.53 and UL requirements LAYING LENGTH: In accordance with ANSI/AWWA C153/A21.53 (fittings not listed in ANSI/AWWA have dimensions per Star design as noted in the catalog) MEMBER DEFLECTION: 2"- 4"=8° | 6"=7° | 8"-12"=5° | 14"-16"=3 ½° | 18"-24"=3° | 30"-48"=2° WEIGHTS: Are in pounds, unless noted otherwise and do not include accessories, cement lining and coating FLANGES: Flanged ends on fittings match ANSI/AWWA C115/A21.15 and ANSI B16.1 class 125 flanges CEMENT LINING: In accordance with ANSI/AWWA C104/A21.4 -- size 2" - 3" single thickness and sizes 4" - 64" double thickness COATING: Asphaltic seal coat inside and out in accordance with ANSI/AWWA C104/A21.4 and referenced in ANSI/AWWA C153/A21.53 GASKETS: SBR in accordance with ANSI/AWWA C111/A21.11 Low alloy steel in accordance with ANSI/AWWA C111/A21.11 APPROVALS: 3" - 12" UL/ULC Listed | 2" and greater are UL/ANSI/NSF Standards 61 and 372 | 3" - 16" FM APPROVED. Please consult factory for detail listing and approvals. DIMENSIONS: All dimensions are in inches unless noted otherwise. INSTALLATION: Per ANSI/AWWA C600 and C111 using DIP conforming to C150/C151 and PVC pipe conforming to C900/C905 M L QSPKFDU!OBNF; X K1 Ø FOHJOFFS; 7° S K2 J 2° C0.12 in. D 0.75 in. TQFD/!TFDUJPO; F A 2"-24" = 0.31 in. 30"-64" = 0.38 in. B MECHANICALJOINT DIMENSIONS BOLTS NOM. A DIA.BC DIA.D DIA.F DIA.J DIA.K1 DIA.K2 DIA.LMSØX DIA. SIZE SIZENO. 54 60 {Fittings & Dimensions Available On Request } 64 LINING OPTIONS (Please check one):COATING OPTIONS (Please check one): Size Range _____________________________ Standard: Cement-lined and asphalt seal coat per ANSI/Standard: Asphaltic seal coat per ANSI/AWWA AWWA C104/A21.4 and UL/NSF-61C104/A21.4 Optional: FBE (Fusion Bonded Epoxy) per ANSI/ Optional: FBE (Fusion Bonded Epoxy) per ANSI/ AWWA C116/A21.15 and UL/NSF-61 - ID & OD OnlyAWWA C116/A21.15 and UL/NSF-61 - ID & OD Only Optional: P401 (Protecto 401) Ceramic Epoxy - sewer Optional: Other (specify) ________________ applications only. Not NSF-61 Optional: Other (specify) __________________ UCAT.15.01-SUB ® STAR PIPE PRODUCTS HOUSTON CORPORATE TOLL FREE 1-800-999-3009 FAX 281-558-9000 www.starpipeproducts.com Page 1 26UANSI/AWWAC110/A21.10 FlangeJointFullBody DuctileIronFittings Revised12/2015 DOMESTIC NONDOMESTIC SUBMITTAL:C110FLANGEJOINTPRODUCT (CurrentrevisionsforallnotedStandardsapply) SIZES:ЋͼthroughЏЍͼ(*ContactTylerUnionforЎЍͼЏЍͼFlangefittinginformation) STANDARDS:ANSI/AWWAC110/A21.10,NFPA13/24,ЌͼЊЋͼULlistedandFMapproved. Material:CastofASTMA536qualifiedductileiron.Datecodeiscastonandrequiredfortraceability. CountryofOrigincastonfittings. PRESSURERATING:FlangedfittingsΫЋͼthroughЍБͼratedat250psiandЎЍͼthroughЏЍͼratedat150psi. *Note:Withtheuseofrubberannularringflangegasket,ЋͼΑЋЍͼfittingscanberatedat350psi. DEFLECTION:DeflectionisͻƓƚƷͼrecommendedforflangejointfittingsduetotherigidityofthejoint. NSF61&NSF372:MeetsallrequirementsincludingAnnexG,Tyler ƓźƚƓ͸ƭUnderwritersLaboratorylistingMH16439. COATING:StandardasphalticperANSI/AWWAC104/A21.4andANSI/AWWAC110/A21.10.StandardPrimer isTnemecPotaPox140N1211.FusionbondedepoxyavailableperANSI/AWWAC116/A21.16. Additionalcoatingavailableuponrequest. CEMENTLINING:PerANSI/AWWAC104/A21.4,withdoublecementlining. BAREFITTINGS:Availableuponrequest. FLANGE:ANSIClass125perASMEB16.1andANSI/AWWAC111/A21.11.Note:*ANSIClass250ASMEB16.1 flangedfittingsavailableuponrequest.Note:*Duetolargerboltsizingandboltcircle,Class250 flangesareͻƓƚƷͼcompatiblewithClass125flangedfittings.AWWAC110andAWWAC115Class 125flangesarecompatible.Boltholesshallstraddlethecenterline. FASTENERS:HighstrengthlowalloyweatheringsteelperANSI/AWWAC111/A21.11andASTMA242 INSTALLATION:InstallperAWWAC600/C651usingpipeconformingtoANSI/AWWAC151/A21.51orAWWA C900/905. FLANGEDETAILSININCHESBOLTS SizeDiameterFlangeO.D.BoltCircleFlangeThicknessBoltHoleSizeQty. InchesDIPipeDiameter"T"Diameter 4.750.62 2 2.516.000.7505/8 x 2.254 6.000.75 3 3.967.500.7505/8 x 2.254 4 4.807.500.940.750 9.005/8 x 3.008 6 9.501.00 6.9011.000.8753/4 x 3.508 8 9.0511.751.120.875 13.503/4 x 3.508 10 14.251.19 11.1016.001.0007/8 x 4.0012 12 13.2017.001.25 19.001.0007/8 x 4.0012 14 18.751.38 15.3021.001.1251 x 4.5012 16 17.4021.251.44 23.501.1251 x 4.5016 18 22.751.56 19.5025.001.2501-1/8 x 5.0016 20 21.6025.001.691.250 27.501-1/8 x 5.0020 24 29.501.88 25.8032.001.3751-1/4 x 5.5020 30 32.0038.7536.002.121.375 1-1/4 x 5.5028 36 46.0042.752.38 38.301.6251-1/2 x 7.0032 42 44.5053.0049.502.62 1.6251-1/2 x 7.5036 48 59.5056.002.75 50.801.6251-1/2 x 8.0044 Available on Request 54 Available on Request 60 Available on Request 64 Tyler:11910CR492Tyler,TX75706(800)5278478Dallas:1201,Avenue5GrandPrairie,TX75050 th Anniston:1501W17St.Anniston,AL36201(800)2267601Anniston:1800GreenbrierRdAnniston,AL36201(800)2267601 NewLenox:2200WestHavenNewLenox,IL60451Elmer:701KenyonAveΘElmer,NJ03318 Corona:1001ElCaminoAve.Corona,CA92879(866)5278471Portland:6204N.MarineDr.Portland,OR97203 Page1 of 1 24UANSI/AWWAC153/A21.53 MechanicalJointCompact DuctileIronFittings Revised12/2015 DOMESTIC NONDOMESTIC SUBMITTAL:C153MECHANICALJOINTPRODUCT (CurrentrevisionsforthenotedStandardsapply) SIZES:ЋͼthroughЏЍͼΛЋͼnotincludedinANSI/AWWAC153standard) STANDARDS:ANSI/AWWAC153/A21.53,NFPA13/24,ЌͼЋЍͼULandЌͼЊЋͼCalisted&approved. Material:CastofASTMA536qualifiedductileiron.Datecodeiscastonandrequiredfortraceability. PRESSURERATING:*Flangedfittingsratedat250psi.MechanicaljointsЋͼΑЋЍͼratedat350psiandЌЉͼΑЍБͼat250psi. *Note:Withrubberannularringflangegasket,ЋͼΑЋЍͼFlangedfittingscanberatedat350psi. DEFLECTION:MaxjointdeflectionЋͼΑЊЋͼͲ5°andЊЍͼΑЍБͼͲ3°.Reducesby50%atnominalpipe&fittingdiameters NSF61&NSF372:MeetsallrequirementsincludingAnnexG,Tyler ƓźƚƓ͸ƭUnderwritersLaboratorylistingMH16439. COATING:StandardasphalticperANSI/AWWAC104/A21.4andANSI/AWWAC110/A21.10.Fusionbondedepoxy coatingperANSI/AWWAC116/A21.16isavailable.Additionalcoatingavailableuponrequest. CEMENTLINING:PerANSI/AWWAC104/A21.4,withdoublecementlining. BAREFITTINGS:Availableuponrequest. FASTENERS:HighstrengthlowalloyweatheringsteelperANSI/AWWAC111/A21.11andASTMA242 NSTALLATION:InstallperAWWAC600/C651usingpipeconformingtoANSI/AWWAC151/A21.51orAWWA C900/905. NOMINALJOINTDIMENSIONSININCHESBOLTS SizeADia.BHUBCDia.DDia.FDia.K¹ØXOPJDia.Dia.K²Dia.LMSQty.Size InchesDIPipeDepthGLANDGLANDGLANDGLAND 3.503.600.31 2 2.512.502.6128°3/44.756.196.890.580.620.630.365/8x3.02 4.844.940.31 3 3.962.504.0628°3/46.197.627.690.580.620.630.395/8x3.04 4 4.805.926.024.907.500.31 2.5028°7/89.069.120.600.750.750.393/4x3.54 6 8.028.120.31 6.902.507.0028°7/89.5011.0611.120.630.880.750.433/4x3.56 8 9.0510.1710.279.1511.750.31 2.5028°7/813.3113.370.661.000.750.453/4x4.06 10 12.2212.340.31 11.102.5011.2028°7/814.0015.6215.620.701.000.750.473/4x4.08 12 13.2014.3214.4413.3016.250.31 2.5028°7/817.8817.880.731.000.750.493/4x4.08 14 16.4016.540.31 15.303.5015.4428°7/818.7520.3120.250.791.250.750.553/4x4.510 16 17.4018.5018.6417.5421.000.31 3.5028°7/822.5622.500.851.310.750.583/4x4.512 18 20.6020.740.31 19.503.5019.6428°7/823.2524.8324.751.001.380.750.683/4x4.512 20 21.6022.7022.8421.7425.500.31 3.5028°7/827.0827.001.021.440.750.693/4x4.514 24 26.9027.040.31 25.803.5025.9428°7/830.0031.5831.501.021.560.750.753/4x5.016 30 32.004.5033.2933.4632.1720°36.880.38 11/839.1239.121.312.001.000.821x6.020 36 4.5039.5939.7620°0.38 38.3038.4711/843.7546.0046.001.452.001.001.001x6.024 42 44.504.5045.7945.9644.6720°50.620.38 13/853.1253.121.452.001.001.2511/4x6.528 48 4.5052.0952.260.38 50.8050.9720°13/857.5060.0060.001.452.001.001.3511/4x6.532 54 AvailableonRequest 60 AvailableonRequest 64 AvailableonRequest Tyler:11910CR492Tyler,TX75706(800)5278478Dallas:1201,Avenue5GrandPrairie,TX75050 th Anniston:1501W17St.Anniston,AL36201(800)2267601Anniston:1800GreenbrierRdAnniston,AL36201(800)2267601 NewLenox:2200WestHavenNewLenox,IL60451Elmer:701KenyonAveΘElmer,NJ03318 Corona:1001ElCaminoAve.Corona,CA92879(866)5278471Portland:6204N.MarineDr.Portland,OR97203 Page1 of 1 29U-Domestic Heavy Duty Cast Iron Curb, Service, & Valve Boxes + Components Revised 0/1 SUBMITTAL (Current Revisions for All Standards Apply) SIZES: ............................Adjustable Slip and Screw type with standard assembled lengths ranging from 19” to 72” (Lengths noted do not include the addition of risers, extensions, and/or bases). See the Catalog or List Price guide for access., lids, rings, bases, risers, meter covers, etc. STANDARDS: .................Produced with Class 35 cast iron in accordance with and meeting all applicable terms and provisions of ASTM A-48. All Tyler Union valve boxes when properly installed are suitable for use in conjunction with projects utilizing American Association of State Highway and Transportation Officials (AASHTO) standards and provisions. INSTALLATION: .............Per AWWA M44, Manual of Water Supply Practices COATING: ......................The asphaltic bituminous coating is applied to a thickness 1.5 mil and the coating once dry is neither brittle when exposed to cold or sticky when exposed to the sun. For 4” to 12” Valves For 4” to 12” Valves For 3” to 20” Valves For 4” to 12” Valves 5¼” Shaft, Screw Type 5¼” Shaft, Slip Type 5¼” Shaft, Screw Type5¼” Shaft, Slip Type 7126 SLIP TYPE 6850 SCREW TYPE 6860 SCREW TYPE 6855 SLIP TYPE VALVE BOX VALVE BOX VALVE BOX VALVE BOX Cast Iron - 2 pieceCast Iron - 3 piece Cast Iron - 2 piece Extension Components Height Extension Extension Extension Components Height Components) Height Components Height 10T + 12B 27-37 10T + 24B 27-32 10T + 18B 33-42 10T + 24B 27-32 NOTE: with these Tops NOTE: Order Separately For ½” to 2” Curbstops 6500 SCREW TYPE T = Top CURB / SERVICE BOX B = Bottom Extension Componets In Inches EXT = Extension 18T & 27B 30-42 *Enlarged Base Available Tyler:11910 CR 492-Tyler,TX 75706-(800) 527-8478 Anniston:1-L 1- Corona:1001 El Camino Ave.-Corona, CA 92879-(866) 527-8471 Portland: 6204 N. Marine Dr.-Portland, OR 97203-(866) 527-8471 www.tylerunion.com 31U-Standard Mechanical & Push-On Joint Gaskets (SBR, NBR, EPDM, Neoprene, FKM) Revised 11/11 Page 1 of 2 SUBMITTAL (Current revisions for all Standards apply) Tyler Union Waterworksprovides that our *Mechanical and Push-On joint gaskets and dimensions conform to the specifications in ANSI/AWWA C111/A21.11-7 (current revision). Markings include size, mold number, gasket manufacturer's mark, country where molded, and product identification letters. No markings are placed on sealing surfaces per the AWWA C111 standard. *Note:Push-On and Mechanical Joint transition gasket design standards and markings are not addressed by ANSI/AWWA C111/A21.11-7 (current revision).Transition gaskets provided by Tyler Union follow the material testing standards and specifications established for ANSI/AWWA C111/A21.11-7 gaskets. Gasket material is vulcanized styrene butadiene rubber (SBR). Purchaser may request special application elastomers (EPDM, Nitrile, Neoprene & FKM) which will be identified on all documentation and corresponding gaskets. Gaskets are free of foreign materials, porous areas, or other defects that make them unfit for the intended use. Tyler Union gaskets are manufactured under quality control standards and procedures that are maintained by the gasket supplier. Appropriate documentation is maintained by the manufacturer and available for review upon request. Properties and test methods for SBR, EPDM, Nitrile, Neoprene and FKM gaskets are as provided. Property ASTM Test Method Required Value Hardness, Shore “A” D2240-86 75 (+-5) Minimum Tensile D412-87 1500 psi (10MPa) Minimum Elongation D412-87 150 % Minimum Aging D572-88 60 % Maximum Compression Set D395-89, Method B 20 % Resistance to surface D1149-86 No cracking Ozone cracking Tyler Union'sapproved suppliers maintain a quality assurance program that is reviewed and updated on an ongoing basis to ensure product quality. Tyler Union's gasket supplierssubmit gaskets for testing and provide materials for testing to Underwriters Laboratories, Inc. Tyler Union's gasket providersare recognized under the component program (UL 194/ UL 157) of Underwriters Laboratories, Inc. Tyler Union provides that our Mechanical and Push-On joint gaskets for potable or wastewater projects will perform as designed when selected per the chart provided and installed per AWWA C600-10. SBR (Styrene Butadiene rubber)(Buna-S) 20°F to180°FSuitable for Water, Wastewater, most moderate chemicals, wet or Not Recommended for Hydrocarbon Service dry organic acids, alcohols,ketones, and aldehydes EPDM (Ethylene Propylene)-10°F to 250°FIdeal for water, wastewater, ozone, & strong oxidizing chemicals Not Recommended for Hydrocarbon Service May be used on steam and air within its temperature range CR (Neoprene)-10°F to 200°FRecommended for moderate chemicals and acids, oil fats, greases, many solvents and air with hydrocarbons.Will not support combustion NBR (Nytril)(Buna-N)(Hycar)-40°F to 250°F Ideallysuited for gasoline,petrolium products, hydrocarbons, water, mineral and vegetable oils *FKM(Fluoroelastomer) 10°F to 425°F Ideally suited for hydrocarbons,acids,vegetable oils & petrolium *Check with Customer Service for availability Gasket Types Offered: (1)Mechanical Joint std.(2) Push-On Joint std.(3)MechanicalJoint DUO (4)Mechanical & Push-on Joint Transition(5)Push-on Restraining (6)Mechanical Joint Armor Tip Conductivity(7)Compact tapping Sleeve Unless other wise requested by the purchaser upon order placement, all gaskets provided will be of our standard SBR material. 11910 CR 492 - Tyler,TX 75706 - (800) 527-8478 1501 W. 17th. St. - Anniston, AL 36201 - (800) 226-7601 1001 ElCamino Ave. - Corona, CA 92879 - (866) 527-8471 6204 N. Marine Dr. - Portland, OR 97203 - (866) 527-8471 www.tylerunion.com 69 31U-Standard Mechanical & Push-On Joint Gaskets (SBR, NBR, EPDM, Neoprene, FKM) Page 2 of 2 Mechanical Joint Gasket Dimensions in Inches MECHANICAL JOINT GASKETS * 2 *MJ Tru-Lock Gaskets 30 to 48 inch 1/*.50 ./*.50 3 ./*.55 1/*1.16 1/*.50 .3/*.50 3 ./*.55 1/*1.16 1/*.50 ./*.50 ./*.55 1/*1.16 1/*.50 ./*.50 ./*.55 1/*1.16 ** does meet AWWA C111 **Mechanical Joint Transition Gasket Dimensions in Inches Pipe A B C D E F G Size ± 0.01" ±1% ± 0.01" ± 0.02" 2572.282408 30623.4511 474.4376 67663365 882 8.50427 79109396 0 .84.75 .31 12.56 .16 .44 1.28 12 ** Not Included in AWWA C111. Manufacturers Standard does meet applicable AWWA C111 requirements 11910 CR 492 - Tyler,TX 75706 - (800) 527-8478 1501 W. 17th. St. - Anniston, AL 36201 - (800) 226-7601 1001 ElCamino Ave. - Corona, CA 92879 - (866) 527-8471 6204 N. Marine Dr. - Portland, OR 97203 - (866) 527-8471 www.tylerunion.com 70 BOLTS AND NUTS FOR MECHANICAL JOINTS *Bolts and Nuts meet ANSI/AWWA C111/A21.11 *ASTM A242 High Strength Low Alloy Steel (Coated or Uncoated) *ANSI 304 or 316 AISI Stainless Steel (Coated Green or Red) *Flouropolymer is Fluorokote #1 (Blue for Low Alloy Steel) T-Head Low Alloy Weathering and AISI Stainless Steel Fasteners Dimensions in Inches C D T J R + M +or - .5 +or - +or -. .5 +or - +or - 1.750 8 +or - 0 x 7.5 2200075 4 8000 +or - 1.625 000 0 1-1/4 x 6.5 2.50 1.250 6.5 3.50 7 1.250 +or -.08 2.000 -.08 1.250 0.750 1/4 x 8.5 2.50 1.250 8.5 4.00 7 1.250 +or -.08 2.000 -.08 1.250 0.750 The tolerance for cast iron bolts is +or-0.03". If threads are rolled, the body diameter may be reduced to the approximate pitch diameter of the thread. Tolerance: +3, - 0 threads course-threads series (ANSI.ASME B1.1), Class 2A, external fit UNC2A and Class 2B, UNC2B (ANSI/ASME B1.2 Excavation dimensions - MJ 4" through 12" Tapping Sleeves for Ductile Pipe 5 256772_utility catalog.pdf 5512/15/08 8:24:33 AM WHITE RHINOWHITE RHINO Product Specifications 150# FLANGE BOLT SETS GRADE 5 Product Features HEX BOLTS Manufactured to I/A/W ANSI/ASME B18.2.1. They conform to ASTM A307, Grade A specifications. FINISHED HEX NUTS Manufactured to I/A/W ANSI/ASME B18.2.2. They conform to ASTM A563, Grade A specifications. The Bolts And Nuts Are Supplied With A Plain Finish. EGW Item IDSizeCase Qty.Bolt Length 186351-1/2"501/2"-13 x 2Ž 186362"505/8Ž-11 x 2-1/2Ž 186372-1/2"505/8Ž-11 x 3Ž 186373"505/8Ž-11 x 3Ž 186384"205/8Ž-11 x 3Ž 186395"103/4"-10 x 3-1/4Ž 186406"103/4"-10 x 3-1/4Ž 186418"103/4"-10 x 3-1/2Ž 1864210"17/8Ž-9 x 3-3/4Ž 1864312"17/8Ž-9 x 3-3/4Ž 1864414"11Ž-8 x 4-1/2Ž 1864516"11Ž-8 x 4-1/2Ž 1864618"11-1/8Ž-7 x 5Ž 1864820"11-1/8Ž-7 x 5Ž 1864924"11-1/4Ž-7 x 5-1/2Ž DISTRIBUTED EXCLUSIVELY BY Plumbing Tube | Type G | Gas TubingPage 1of 2 Plumbing Tube / Type G / Gas Great Lakes Copper, Inc. manufactures a complete line of copper plumbing tube in types K, L, M, DWV and G/Gas for residential, commercial and specialty applications; in standard industry diameters; supplied in coil or straight length forms. Each tube is fabricated to meet the highest industry standards. Tube Temper Temper StandardApplication TypeHardSoft Domestic water service and ASTMdistribution, solar, fuel/fuel oil, Type Kxx B88natural gas, liquefied petroleum (LP) gas, snow melting Domestic water service and ASTMdistribution, solar, Fuel/fuel oil, Type Lxx B88natural gas, liquefied petroleum (LP) gas, Snow melting ASTMDomestic water service and TYPE MxN/A B88distribution, solar, Compressed air Type ASTM Drainage waste, vent xx DWVB-306 Type ASTM Natural gas, liquefied petroleum (LP) xx G/GasB-837gas General ASTM Supply Line/Retailxx PurposeB75 Seamless copper water tube (Alloy C12200) is certified by NSF to ANSI/NS Standard 61 for public water supplies. Water supplies with a pH level less than 6.5 may require corrosion control to limit the copper solubility in drinking water. Great Lakes Copper, Inc. third-party certified tube is manufactured to meet all requirements of the current revision to the applicable American Society for Testing and Materials (ASTM) specification. ASTM dimensions, and if necessary, weight tolerances are available upon request. Residential For portable water systems or servicing the residential fuel and gas industries, Great Lakes Copper, Inc. manufactures the right tube for all residential applications. Commercial Large and small diameter copper tube for various applications is readily available. Great Lakes Copper, Inc. manufactures all tube to meet exact standards and specifications. http://www.wlvtc.com/plumbing-print.asp8/19/2013 Plumbing Tube | Type G | Gas TubingPage 2of 2 Industrial Customized to your specifications in an ever changing world, unique requests or everyday tube requirements are our specialty. Great Lakes Copper, Inc. 1010 Clarke Rd., London, ON N5Y 5S6 Canada Canada Toll Free: 1.800.265.9271 Canada (Local): 519.455.0770 US Toll Free: 1.800.561.7119 Fax: 519.455.9238 http://www.wlvtc.com/plumbing-print.asp8/19/2013 SUBMITTAL INFORMATION Brass Saddles - (202B-xxx-xxxstyle) 202B DOUBLE STRAP BRASS SADDLES Brass nuts EPDM Gasket Silicon bronze straps N OM. P IPE O.D.A PPROX.C ATALOG S UBMITTED S IZE R ANGE W T. L BS.N UMBER I TEM(S) 4.80 - 5.406.6202B-540-Tap 4.80 - 5.107.3202B-510-Tap *4" 5.10 - 5.407.3202B-540-Tap 6.90 - 7.507.7202B-750-Tap **6" 9.05 - 9.628.8202B-962-Tap 8" 11.10 - 12.1210.7202B-1212-Tap 10" 13.20 - 14.3811.8202B-1438-Tap 12" 15.30 - 16.2518.0202B-1625-Tap **14" 16.30 - 17.2519.1202B-1725-Tap 17.40 - 18.4023.0202B-1840-Tap **16" 18.50 - 19.2524.0202B-1925-Tap 19.50 - 20.5025.0202B-2050-Tap **18" 21.20 - 22.2025.5202B-2220-Tap **20" 22.50 - 23.5025.7202B-2350-Tap 23.80 - 24.8026.0202B-2480-Tap **24" 25.60 - 26.5026.5202B-2650-Tap 31.74 - 32.7427.0202B-3274-Tap **30" O UTLET T AP C ODE CC (AWWA) T HREAD IP T HREAD S UBMITTED I TEM(S) T HREAD C ODE N UMBER T HREAD C ODE N UMBER 3/4" IP IP3 3/4" CC CC3 1" IP IP4 1" CC CC4 1-1/4" IP IP5 1-1/4" CC CC5 1-1/2" IP IP6 1-1/2" CC CC6 2" IP IP7 2" CC CC7 Contact factory for availability * Please Note: 4" Saddles with 2" taps have a limited range. Specifically, 4.80 - 5.10 or 5.10 - 5.40. All other tap sizes have the standard 4.80 - 5.40 range. **Only the 6" (6.90-7.50 range) saddle and 14" saddles and larger are available with a 1-1/4" tap. *To Order: Select the catalog number for the desired pipe range and complete the catalog number by adding the outlet thread tap code. Example: A double strap saddle for 6.90 D.I. pipe with a 3/4" CC thread would be 202B-750-CC3. FEATURES ¤ All brass conforms to AWWA Standard C800 (ASTM B-62 and/or ASTM B-584, UNS NO C83600 - 85-5-5-5) ¤ Straps are 5/8" high quality silicon bronze flattened to provide a wider bearing surface against pipe ¤ Gasket is EPDM rubber ASTM D2000 ¤ 200 PSI rated working water pressure through 14" nominal pipe size The Ford Meter Box Company considers the information in this submittal form to be correct at the time of publication. Item and option availability, including specifications, are subject to change without notice. Please verify that your product information is current. Submitted By: The Ford Meter Box Company, Inc. P.O. Box 443, Wabash, Indiana U.S.A. 46992-0443 Phone: 260-563-3171 / Fax: 800-826-3487 Overseas Fax: 260-563-0167 www.fordmeterbox.com 01/11/16 SUBMITTAL INFORMATION Corporation Stops - (F1000-x-G-NL style) AWWA/CC TAPER THREAD INLET BY GRIP JOINT FOR COPPER OR PLASTIC TUBING (CTS) OUTLET Solid one piece tee-head and keyBody Outlet ThreadsBeveled EPDM rubber gasket provides hydraulic seal Nylon Washer Phosphorous Bronze Gripper Ring for axial restraint AWWA/CC Threads Grip Joint Nut InletOutlet Length V ALVE B ODY O UTLET A PPROX.P ART S UBMITTED V ALVE S IZE I NLET S IZE O UTLET S IZE L ENGTH T HREADS W T. L BS N UMBER I TEM(S) 5/8” 5/8”3/4”3-1/2”3/4” Flare Copper1.4F1000-23-G-NL 3/4” 3/4”3/4”3-3/4”3/4” Flare Copper1.7F1000-3-G-NL 3/4” 3/4”1” 3-7/8”1” Flare Copper1.9F1000-34-G-NL 1” 1”1” 4-9/16”1” Flare Copper2.7F1000-4-G-NL 1” 1”1-1/4” 4-5/8”1-1/4” Flare Copper3.2F1000-45-G-NL Note:Ford recommends using insert stiffeners with plastic pipe or tubing. FEATURES • All brass that comes in contact with potable water conforms to AWWA Standard C800 (UNS NO C89833) • The product has the letters "NL" cast into the main body for proper identification • UL Classified to ANSI/NSF Standard 61 and Standard 61 Annex G (NSF/ANSI 372) • Brass components that do not come in contact with potable water conform to AWWA Standard C800 (ASTM B-62 and ASTM B-584, UNS NO C83600 - 85-5-5-5) • Body design provides larger, more rugged wrench flats for proper installation • Meets 100 PSI working pressure requirement of AWWA Standard C800 The Ford Meter Box Company considers the information in this submittal form to be correct at the time of publication. Item and option availability, including specifications, are subject to change without notice. Please verify that your product information is current. Submitted By: The Ford Meter Box Company, Inc. P.O. Box 443, Wabash, Indiana U.S.A. 46992-0443 Phone: 260-563-3171 / Fax: 800-826-3487 Overseas Fax: 260-563-0167 http://www.fordmeterbox.com 01/28/13 SUBMITTAL INFORMATION Angle Ball Meter Valves - (BA43-444W-G-NL style) GRIP JOINT FOR COPPER OR PLASTIC TUBING (CTS) INLET BY METER SWIVEL NUT OUTLET Solid one piece tee-head and stem Sturdy stops allow 90° motion and are enclosed and protected A snap ring locks the stem into the body of the valve Drilled for Seal Wire Padlock Wing for locking valve in closed position Bronze Snap Ring Meter Coupling Thread EPDM O-rings in the stem EPDM Rubber meter gasket Meter Swivel Nut Fluorocarbon-coated brass ball Outlet Molded EPDM rubber seat supports the ball Height Beveled EPDM rubber gasket provides hydraulic seal Phosphorous Bronze Gripper Ring for axial restraint Grip Joint Nut Inlet Length S ERVICE L INE M ETER S IZE A PPROX.P ART S UBMITTED V ALVE S IZE L ENGTH H EIGHT S IZE I NLET O UTLET W T. L BS N UMBER I TEM(S) 1" 1"1" 2-43/64"2-29/64"3.7BA43-444W-G-NL Note: Ford recommends using insert stiffeners with plastic pipe or tubing. FEATURES • All brass that comes in contact with potable water conforms to AWWA Standard C800 (UNS NO C89833) • Brass components that do not come in contact with potable water conform to AWWA Standard C800 (ASTM B-62 and ASTM B-584, UNS NO C83600 - 85-5-5-5) • Ends are integral or secured with adhesive to prevent unintentional disassembly • Hole for attaching handle is provided in tee-head • 300 PSI working pressure • Padlock Wing for locking valve in closed position • Conforms to AWWA C700 for Meter threads • UL Classified to ANSI/NSF Standard 61 and Annex G Note: Recommended for inlet side shut-off Optional full 360° tee-head rotation. Insert "R" into part number. Example: BA43-331WR-G-NL The Ford Meter Box Company considers the information in this submittal form to be correct at the time of publication. Item and option availability, including specifications, are subject to change without notice. Please verify that your product information is current. Submitted By: The Ford Meter Box Company, Inc. P.O. Box 443, Wabash, Indiana U.S.A. 46992-0443 Phone: 260-563-3171 / Fax: 800-826-3487 Overseas Fax: 260-563-0167 http://www.fordmeterbox.com 11/23/10 Sani-21’: PVC Sewer Pipe SPECIFICATION DATA TM SANITARY SEWER PIPE FOR THE 21st CENTURY D3034 & F679 SEWER SPECIFICATION DATA Diamond gravity sewer pipe 4 inches through 60 inches shall be made of compounds conforming to material requirements of ASTM D3034 and ASTM F679 in accordance with ASTM D1784. Diamond PVC Sewer Pipe meets all the dimensional, chemical, and physical requirements as outlined in ASTM D3034 and ASTM F679. A listing to CSA B182.2 is available for most of these sizes. A complete listing by manu- facturing plant is available upon request. The pipe sizes 4 inches through 60 inches are made with an integral bell water-tightŽ joint that meets the requirements of ASTM D3212 and that utilizes a Rieber gasket system for sealing that meets the requirements of ASTM F477. Each male end shall be beveled to facilitate joining and referencing marked for proper insertion depth. Diamond furnished lubricant is to be used in the joining process. Physical Properties of ASTM D3034 & F679 Pipe Materials: Pipe shall be made of PVC plastic having a minimum cell classification of 12454 or 12364 as defined in Specification D1784. Property ASTM Minimum Test 12454/12364 Specific Gravity D792 1.40/1.40 Tensile Strength, psi D638 7,000/6,000 Tensile Modulus, psi D638 400,000/500,000 IZOD Impact Strength, D256 .65ft., lb./in. SHORT FORM Specification for Diamond PVC Solid-Wall Sewer Pipe SDR 26 or SDR 35 or PS 46 or PS 115 All PVC Solid-Wall Sewer PIpe shall be made of compounds conforming to ASTM D1784 manufactured in accordance with the material requirements of ASTM D3034 or ASTM F679. All PVC Sewer Pipe must meet dimensional, chemical, and physical requirements as outlined in ASTM D3034 orASTM F679. Joints shall meet the requirements of ASTM D3212 and shall be formed using Rieber Technology. PVC Sewer Pipe shall be installed according to the requirements of ASTM D2321, Uni-Bells Uni-Pub 6 and the manufacturers recommendations. Corporate Headquarters € 1212 Johnstown Road € P.O. Box 1608 € Grand Island, NE 68802-1608 SANITARY SEWER PIPE FOR THE 21st CENTURY page 18 eighteen TM Sani-21’: S PVC Sewer Pipe SANITARY SEWER PIPE FOR THE 21st CENTURY SPECIFICATION DATA Rieber Joint Illustration DC t B A Sani-21 is supplied in 14 foot and 22 foot laying lengths. ’ D3034 & F679 SEWER SPECIFICATION DATA Sani-21 Nominal OutsideBell SocketSocketInsertWall ThicknessWall Thickness Pipe SizeDiameter ADiameter BDepth CMark DSDR26/PS115 SDR35/PS46 Standard laying lengths are 14 & 22 feet in. (mm)InchesInchesInchesInches #(t) Inches(t) Inches D-3034 Pipe Dimensions 4Ž (100) 4.215 5-1/4 4-5/8Ž 4 0.162 0.120 6Ž (150) 6.275 7-1/2 4-3/4Ž 4-1/8 0.241 0.180 8Ž (200) 8.400 9-7/8 6-1/8Ž 4-7/8 0.323 0.240 10Ž (250) 10.500 12-3/8 6-3/4Ž 5-1/4 0.404 0.300 12Ž (300) 12.500 14-5/8 7-1/4Ž 5-1/2 0.481 0.360 15Ž (375) 15.300 18 7-1/4Ž 4-5/8Ž 0.588 0.437 F-679 Pipe Dimensions 18Ž (450) 18.701 21-3/4Ž 9-1/2Ž 7-3/4Ž 0.671 0.499 21 (525) 22.047 25-1/2Ž 10Ž 8-1/2Ž 0.791 0.588 24 (600) 24.803 28-3/4Ž 11Ž 10Ž 0.889 0.661 27 (675) 27.953 32-1/2Ž 13-1/4Ž 11-1/8Ž 1.002 0.745 30 ciod (750) 32.000 37-1/4Ž 14Ž 13-5/8Ž 1.148 0.853 36 ciod (900) 38.300 43-1/4Ž 15Ž 13-7/8Ž 1.373 1.021 42 ciod (1050) 44.500 53Ž 18Ž 16-3/4Ž 1.596 1.187 48 ciod (1200) 50.800 60Ž 18Ž 16-7/8Ž 1.355 54Ž ciod (1350) 57.560 67 * * 2.227 1.641 60Ž ciod (1500) 61.610 72Ž * * 2.384 1.756 *Contact manufacturer for specific information. Possession of this page does not constitute an offer of saleŽ #Tolerance of +/- 1/4Ž allowed Prices are subject to a firm policy of Price in effect at time of shipment on regular purchasesŽ Corporate Headquarters € 1212 Johnstown Road € P.O. Box 1608 € Grand Island, NE 68802-1608 Rev 12/2013 SANITARY SEWER PIPE FOR THE 21st CENTURY page 19 nineteen PipeLife Jet Stream, Inc. Siloam Springs, AR 72761 479-524-5151 O 479-524-5464 F PVC G RAVITY S EWER P IPE ASTM D 3034 PSM SDR35 SIZE WALL O.D. APPROX GASKET JOINT PIECES SOLVENT JOINT PIECES PER PALLET THICKNESS WEIGHT/FT. PER PALLET 4 .120 4.215 .986 14' - 20' 90 10' -20' 90 6 .180 6.275 2.27 14' - 20' 40 10' -20' 33 8 .240 8.400 4.08 14' - 20' 24 N/A N/A 10 .300 10.500 6.36 14' - 20' 12 N/A N/A 12 .360 12.500 9.11 14' - 20' 9 N/A N/A 15 .437 15.300 13.78 14' - 20' 3 N/A N/A 4" & 6" SDR 35-10' length - available in perforated, 2 or 3 rows of holes. (see page 27) ASTM F 679 SDR 35 SIZE WALL O.D. APPROXIMATE PIECES SOLVENT JOINT GASKET JOINT THICKNESS WEIGHT/FT. PER PALLET LENGTH 18 .536 18.701 20.78 3 N/A 14' only PipeLife Jet Stream, Inc. PVC Gravity Sewer Pipe is manufactured using the Rieber Gasket System. The Rieber Gasket is manufactured in accordance with ASTM F-477 standards. We cannot say that the locked-in-gasket will never have a problem, however, the performance of the locked-in-gasket is as close to trouble free as you can get. A trouble free locked-in-gasket joining installation will guard against rolled gaskets and gasket installation mistakes. Cross section of a PipeLife Jet Stream, Inc. Locked in gasketed joint. 25 GRAVITY SEWER SUBMITTAL AND DATA SHEET 9 PIPE SIZE AVERAGE O.D. NOM. I.D. MIN. T. MIN. E APPROX. WEIGHT APPROX. D (IN)(IN)(IN)(IN)(IN)(LBS/FT) (IN) SDR 35 (PS46) ASTM D3034 4 4.2153.9750.1203.504.6951.05 6 6.2755.9150.1804.256.9952.36 8 8.4007.9200.2404.759.3604.24 10 10.5009.9000.3006.0011.7006.64 12 12.50011.7800.3606.2513.9409.50 15 15.30014.4260.4377.2517.04814.19 SDR 26 (PS115) ASTM D3034 4 4.2153.8910.1623.504.8631.40 6 6.2755.7930.2414.257.2393.11 8 8.4007.7540.3234.759.6925.63 10 10.5009.6920.4046.0012.1168.84 12 12.50011.5380.4816.2514.42412.56 15 15.30014.1240.5887.2517.65218.90 PS46, ASTM F679 18 18.70117.6290.4998.0020.84521.43 21 22.04720.7830.5889.5024.57529.88 24 24.80323.3810.6619.6027.64738.96 27 27.95326.3510.74510.1031.15749.47 30 CIOD 32.00030.1940.85316.7535.61264.18 36 CIOD 38.30036.0421.02119.0242.81693.00 42 CIOD 44.50041.9481.18722.4349.604— 48 CIOD 50.80047.8881.35524.7856.624— PS115, ASTM F679 18 18.70117.2610.6718.0021.58128.49 21 22.04720.3490.7919.5025.443— 24 24.80322.8910.8899.6028.627— 27 27.95325.7991.00210.1032.261— 30 CIOD 32.00029.0701.14816.7536.348— 36 CIOD 38.30035.4641.37319.0245.438— 42 CIOD 44.50041.0721.59622.4351.356— 48 CIOD 50.80046.8861.82224.7858.628— I.D. : Inside Dameter O.D. : Outside Diameter T. : Wall Thickness 9 D : Bell Outside Diameter E : Distance between Assembly Mark to the end of spigot. Product Standard:ASTM 3034 (4”–15”) ASTM F679 (18”–48”) Pipe Compound:ASTM D1784 Cells Class 12454 or 12364 Gasket:ASTM F477 Integral Bell Joint:ASTM D3212 Pipe Stiffness:ASTM D2412 F/Y = 46 PSI or 115 PSI Pipe Length:14 or 20 feet laying length Installation:ASTM D 2321 ™ JM Eagle Installation Guide Grade Rings Grade Rings Americanmaatco.com U NITED B RASS W ORKS,I NC. 714 S. Main St., Randleman, NC 27317 Tel: 800-334-3035 Fax: 800-498-4696 www.ubw.com Model 90 Wafer Check Valve UL Listed *As antiwater hammer check valve for fire pump service only! 250 WOG @ 180° Max 100% Pressure Tested Approved by New York City Board of Standards & Appeals under Calendar No. 157-84-SA. The 4Ñ size is provided with ďÑ pipe plug in drain port as standard configuration. *Contains Lead. Not Intended for Use in Potable Water Systems* MATERIAL LIST Can be installed vertically or horizontally NO.DESCRIPTION MATERIAL 1Body Ductile Iron 2Seat Ring Assembly Bronze 3Screw Stainless Steel 4Seat Ring O-Ring Buna-N 5Face O-Ring Buna-N 6Pipe Plug Steel (4 only) Ship Wt. Qty. Per SizeABCD (lbs) Ctn. 4.25 4.03 6.86 3.00 15.01 3.75 6.06 8.50 4.50 19.01 3.75 7.98 11.00 6.00 29.01 c`s`rgdds STORZ CONNECTIONS FUNCTION: Used as an auxiliary inlet connection to supplement the fire protection water supply. Provides a range from 500 /1892 to1000 /3785 GPM/lpm per inlet. A Storz connection provides a means of rapid supply through large diameter hose. FURNISHED: Hard coated aluminum with Storz on one end and female national pipe thread on the other. STRAIGHT RIGID STORZ Lightweight aluminum alloy - hardcoated to cdosg reduce corrosion and abrasion Available with screen npt STORZ female END gdhfgs rhyd cdosg gdhfgs STRAIGHT RIGID THREAD WITH ROCKER LUG 3ůw3ů 1,0.3ů 65-10-220:3ůrsnqyw3ůMOS'E(qnbjdqktf 5,0.7ů 65-10-233:4ůrsnqyw3ůMOS'E(qnbjdqktf 4ůw3ů 2,0.7ů 6,00.05ů 65-10-222:4ůrsnqyw5ůMOS'E(qnbjdqktf 4ůw5ů kdmfsg Lightweight aluminum alloy - hardcoated to reduce corrosion and abrasion alloy 65-10-232:3ůrsnqyw3ůrvhudkHOS'E(2/cdfqdddkanv IPT 65-10-233:4ůrsnqyw3ůrvhudkHOS'E(2/cdfqdddkanv FEMALE 65-10-229:4ůrsnqyw5ůrvhudkHOS'E(2/cdfqdddkanv rhyd kdmfsg gdhfgs gdhfgs 3ůw3ů 6,01ů 6,4.7ů STORZ 4ůw3ů 8,4.21ů 7,2.7ů END 4ůw5ů 7,4.7ů 7ů 65-10-220S:3ůrsnqyw3ůMOS'E(vhsgrbqddm STORZ SCREEN 65-10-233S:4ůrsnqyw3ůMOS'E(vhsgrbqddm Stainless steel mesh screen 65-10-232S:3ůrsnqyw3ů2/’cdfqdddkanvvhsgrbqddm Prevents vandalism & plugging 65-10-233S:4ůrsnqyw3ů2/’dkanvvhsgrbqddm 65-10-229S:5ůrsnqyw4ů2/’dkanvvhsgrbqddm STORZ CAP WITH CHAIN Lightweight aluminum alloy - hardcoated to reduce corrosion and abrasion gdhfgs rhyd cdosg gdhfgs 65-10-290:3ůrsnqyb`ovhsgbg`hm 3ů 1,0.7ů 5,0.7ů 65-10-291:4ůrsnqyb`ovhsgbg`hm 4ů 1,0.1ů 6,00.05ů 800-854-1015 www.argco.com fax:760-727-3270 data sheet BALL DRIP VALVES Automatic Ball Drip Valve When properly installed, the internal ball rests in the lower most area of the valve body allowing for proper drainage of moisture accumulation. Upon system pressurization, the internal ball is “pushed” into the small end of the ball drip body closing the opening. When system pressure is removed, the ball returns to its original position. One of the most common uses is on the dry side of the Fire Department Connection valve. This use helps keep moisture from accumulating inside the Fire Department Connection. Designed for horizontal installation only. Construction: Body: Cast Brass* Ball: Brass* A SIZE 2-11/16" 1/2" (12 mm) Connection: Straight Connection NPT Both Sides (68.26 mm) 3-1/2" Working Pressure: 175 psi3/4" (19 mm) (88.9 mm) *Contains lead. Not for use in water systems intended for human consumption 6520180: 1/2” x 1/2” MNPT 6520179: 3/4” x 3/4” MNPT Installation Proper installation of the brass ball drip can be accomplished with standard piping installation tools. Make sure the threads are clean and free from burs & debris. Apply a thread sealant suitable for the materials being joined such as Tuf-Glide Thread Sealant, or PTFE tape. When using a paste type sealant, make sure to brush the sealant deep into the root of the threads. Thread the ball drip into female threads hand tight. Finish tightening with a pipe wrench up to one full turn. Do not over tighten. Over tightening may damage threads and ball drip. Finish piping to allow for proper drainage. Valve opens by force of gravity only. Use only in the horizontal position. The information contained herein is produced in good faith and is believed to be reliable but is for guidance only. ARGCO and its agents cannot assume liability or responsibility for results obtained in the use of its product by persons whose methods are outside or beyond our control. It is the user's responsibility to determine the suitability of any of the products, methods of use, or preparation prior to use, mentioned in our literature. It is the user's responsibility to observe and adapt such precautions as may be advisable for the protection of personnel and property in the handling and use of any of our products. FOR MORE INFORMATION CALL ARGCO AT 1-800-854-1015 OR LOG ONTO WWW.ARGCO.COM GUARDIAN FIRE EQUIPMENT, INC. DETAIL AND SUBMITTAL SHEET MIAMI, FL Ph. 800.327.6584 • Fax 800.827.3869 6300 Series - Fire Dept. Inlet Connections - Bodies Project/Location:Date: Architect/Engineer:Qty: Contractor: Appropriate Selection Used as auxiliary connections through which the fi re department can pump water to supplement existing water supplies. Provides 250 GPM fl ow (minimum), per 1 2/2” inlet. A Two and three-way - inlet connections feature clappered brass bodies (straight B or angle pattern), with female hose thread swivel inlets and female outlets. Cast brass construction, standard. 6314 Two and Three-Way Connections B Model No.OutletSizeClappersAB 1111 6314*Back4” x 2/2” x 2/2”15/2”8/8” 1113 A 6315*Angle4” x 2/2” x 2/2”18/8”8/4” 11921 6324Back4” x 2/2” x 2/2”27/32”11/32” 113121 6325Angle4” x 2/2” x 2/2”28/64”11/32” 6315 1111 6326Back6” x 2/2” x 2/2”27/4”10/2” 111 6327Angle6” x 2/2” x 2/2”210”10/2” 11113 6336**Back6” x 2/2” x 2/2” x 2/2”310/2”13/4” A 11111 6337**Angle6” x 2/2” x 2/2” x 2/2”311/2”14/2” Body Lettering AUTO SPKR STANDPIPE B Blank (unlettered) 6324/6326 *Auto Spkr lettering only ** Blank (Unlettered) only B Optional Finish:-BPolished BrassThreads: -CRough Chrome Plated NST -DPolished Chrome PlatedOther A __________ 6325/6327 Plugs with Chains and Break Caps - Used to keep fi re dept. inlet connections free of debris and protect female threads. A Plugs with ChainsBreak Caps Model No.SizeTypeModel No.SizeType 1 1 64062/2”Aluminum 64042/2”Brass B 1 Optional Finish: 64072/2”Plastic 6336 -BPolished Threads: -CRough Chrome Plated Adjustable Plugs B -DPolished Chrome Plated NST Model No.SizeType Other 1 64082/2”Aluminum __________ 1 A 64092/2”Plastic 6337 Contact factory for current listings and approvals For Fire Protection Applications Job Name Contractor Job Location Approval Engineer Contractors P.O. No. Approval Representative LEAD FREE Series TR Transition Risers Customizable Sizes: 4" 10" (100-250mm) Series TR Transition Risers are used to connect the main fire supply to the building overhead fire system. The fitting passes TEST CAP under the foundation without joints and extends up through the NOW INCLUDED! floor. Provided with installation tabs, the unit has a CIPS (Cast Iron Pipe Size) coupler for easy connection to the underground supply (AWWA C900 PVC and Ductile Iron Pipe) and industry standard grooved-end connection (AWWA C606) on the building 6'x6' standard length side for easy connection to the overhead fire sprinkler system. (custom lengths from 3' 20' available) Watts Transition Risers are precision engineered and manu- factured to provide exceptional reliability and reduce instal- lation time & labor costs associated with field assembly. In accordance with NFPA 24, the UL and FM approved Transition Risers replace numerous fittings, elbows & spools and reduces the possibility of leaks or failure in comparison to traditional installation methods and materials. Factory tested integrity TR ensures the highest quality installation. The use of stainless steel significantly increases the reliability and life of the riser. Features Flow € Cost savings Building Floor € Corrosion resistant stainless steel construction, type 304 Building perimeter wall € Ease of installation and lightweight allow one person to position and handle the riser € Minimal site preparation; joint restraint one-piece construc- tion reduces time and labor; no missing parts, no leaks; easily identifiable for approvals € Includes Test Cap and Coupler € UL and FM approved € Sizes: available 4" 10" diameter in 6'x6' standard dimen- sions. Custom horizontal and vertical lengths available 3'-20'. € Designed to meet NFPA 24 Flow € AWWA C900 Inlet/DIP € AWWA C606 Outlet Specification Transition Riser shall be installed as indicated on the plans. Riser shall be composed of a single extended 90 degree fit-Inquire with governing authorities for local installation ting of fabricated 304 stainless steel tubing, maximum working requirements pressure 200psi (14 bar). The fitting shall have a grooved-end *The wetted surface of this product contacted by consumable connection on the outlet (building) side and a CIPS coupler on water contains less than 0.25% of lead by weight. the inlet (underground) side. The grooved end shall include a Coupler and Cap to facilitate testing of the underground piping. The Transition Riser shall be a Watts Series TR. Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements, please contact Watts Technical Service. Watts reserves the right to change or modify product design, construction, specifications, or materials with- out prior notice and without incurring any obligation to make such changes and modifications on Watts products previously or subsequently sold. Standards End Connections: NFPA „ Designed to allow the contractor to conform to NFPA Horizontal End: Mates with Ductile Iron Pipe and AWWA 24C900 Pipe (PVC Pipe with Ductile Iron Pipe Equivalent ODs) Where a riser is close to building foundations, underground Utilizes Gasket conforming to UL 157 with Lock inŽ fittings of proper design and type shall be used to avoid pipe gasket configuration joints being located under the foundations. SIZE (DN)MATING PIPE OD 41004.8122 61506.9175 82009.1230 Approvals 1025011.1282 Fittings UL HKQA (4"-10") Vertical End: Meets AWWA C-606 dimensions for roll grooved pipe Meets AWWA C-207 class D for flanges Ratings Dimensions Weights Meets AWWA C-900 pressure class 200, DR 14 Pipe A Testing Grooved End Welds are 100% leak tested at the factory (Flange Optional) B SIZEDESIGN PROOF PRESSURE CIPS Coupling 4100100070 6150100070 Tie-Rod Bracket 820080056 1025080056 C SIZEWEIGHT A (OD)BC in.in.mmft.Mtrft.mtrlbs.kg 1 44‡2 11461.861.87132 5 66‡8 16861.861.89844 The information contained herein is not intended to replace the 5 88‡8 21961.861.812959 full product installation and safety information available or the 3 1010‡4 27361.861.820292 experience of a trained product installer. You are required to ** Each B (vertical) and C (horizontal) leg is customizable from 3' to 20' with UL/FM thoroughly read all installation instructions and product safety approvals. Consult with your factory representative for details.information before beginning the installation of this product. USA: Tel: (978) 689-6066 € Fax: (978) 975-8350 € Watts.com Canada: Tel: (905) 332-4090 € Fax: (905) 332-7068 € Watts.ca Latin America: Tel: (52) 81-1001-8600 € Fax: (52) 81-8000-7091 € Watts.com ES-TR 1626 © 2016 Watts