Tax2015A (6) ffer
ADVANCE.("ON TRACTIN(.(:ROhP
Submittal Data Form:
Contract: Neighborhood Alley Replacement Project Tax
2015 A
Owner: City of Coppell
Date: 06/23/2016
Specification Section: 03300 - 3
Description: WATER-BASED CONCRETE CURING
COMPOUNDS—REZ ALL& CITY WHITE
Subcontractor/Supplier NA
Submittal Number: 03300 -03
Review/Disposition Stamp Contractor's Certification
APPROVED "Having checked this submission.We certify that
it conforms to the requirements of the contract in
APPROVED, AS NOTED all respects, except as otherwise indicated
CORRECT AND
❑ RESUBMIT ❑ CONFIRM
DISAPPROVED Company name: Advance Contracting Group
i
Signature: ram
Approval does not relieve the Contractor from
responsibility for any errors or omissions in these
submittals and/or shop drawings or from the Name: Mort Tabaie
responsibility for complying with the requirements of this
Contract (except as otherwise provided under the Title: Project Engineer/Project Manager
provisions of the "Specifications and Drawings"clause of
this Contract).
Date: 06/26/2016
Dallas Area Rapid Transit
Date:
By:
3010 LBJ Freeway, Suite 1200 mail a,advancecontractionggroup.com Phone: 972-888-6000
Dallas,Texas 75234 Fax: 972-888 6091
heeler's SHEP CURE 309 CITY WHITE
PLRfOOMGNCEPOOOUCf
WATER-BASED CONCRETE CURING COMPOUND
DESCRIPTION TECHNICAL DATA
The Shep Cure 309 City White series of water-based, whit- Drying Time: Typically dries in two hours, depending on
epigmented concrete curing compounds are wax-based jobsite conditions (temperature, wind, etc.). Restrict foot
dispersions with selected white pigments. When properly traffic for at least four hours. Revised:07111
applied, Shep Cure 309 City White forms a premium-grade Flash Point: >212° F (100° C).
membrane, which optimizes water retention. The white pig-
ment reflects the sun's rays to help keep the concrete surface PACKAGING
cooler and prevent excessive heat buildup. 5 Gallon (18.93 L) Pails, 55 Gallon (208.20 L) Drums
PRIMARY APPLICATIONS COVERAGE
Shep Cure 309 City White is ideal for application on exterior, Approximately 200 ft.2/gal. (4.91 m2/L). Coverage rates
horizontal surfaces,such as highways,airports,and street and may have to be adjusted in windy conditions.
curb paving.Shep Cure 309 City White is not recommended U
for residential applications. The product provides optimum LEED INFORMATION o,
curing when protection from the sun's heat is desired. May help contribute to LEED credits: c^
w
FEATURES & BENEFITS • EQ Credit 4.2: Low-Emitting Materials: Paints&Coatings 0_
• MR Credit 5.1: Regional Materials: 10% Extracted, Pro- U
• When properly applied, provides a premiumgrade film, cessed&Manufactured Regionally
which optimizes water retention. • MR Credit 5.2: Regional Materials: 20% Extracted, Pro- -..-
•
■ Protects by reflecting the sun's rays to keep the concrete cessed &Manufactured Regionally
surface cooler and prevent excessive heat buildup,which
can cause thermal cracking. APPLICATION
• Furnished as a ready-to-use,true water-based compound. New Concrete: Apply She Cure & Hard as soon as sur-
• Produces hard, dense concrete ... minimizes hair check preparation: Application equipment must be clean and
ing,thermal cracking, dusting and other defects. free of any previously used materials.
•
Offers a compressive strength significantly greater than
improperly or uncured concrete. Mixing: Any settling or separation in the container must be F-
■ Increases tensile strength for greater resistance to crack- re-dispersed with gentle agitation prior to use. CAUTION: LU
ing and surface crazing. TO AVOID FOAMING, DO NOT MIX EXCESSIVELY. DO N
• Improves resistance to the abrasion and corrosive actions NOT THIN. Q
of salts and chemicals - minimizes shrinkage. Q
• Applies quickly and easily with conventional commercial APPLICATION a
spray equipment. Spray on in one even coat with a hand or power sprayer as Q
• VOC compliant-VOC content is <100 g/L. soon as the surface water disappears from concrete sur- U
face. Use a Chapin 5797 (or equivalent) spray nozzle that =
produces a flow of 1/2 gal. (1.89 L) per minute under 40 psi
SPECIFICATIONS (.276 MPa) of pressure. UJ
■ U.S. EPA Architectural Coatings Rule: 350 g/L maximum
VOC for concrete curing compounds. Cleanup: Prior to drying,equipment may be easily cleaned •
• SCAQMD Rule 1113: 100 g/L maximum VOC for con- with soap and water. Once dried, use mineral spirits or Z
crete curing compounds and waterproofing concrete/ other suitable petroleum solvent. 0
masonry sealers
• Ozone Transport Commission (OTC): 350 g/L maximum
ce
VOC for concrete curing compounds.
• ASTM C 309, Type 2, Class A LL
• AASHTO M 148,Type 2, Class A
• FAA Spec. Item P-610-2.11 (e) For questions about this U
product,use our OR code U
❑ � ❑ 0
CI all Ire
Continued on reverse side
800-729-1150 I www.cmcsheplers.com • 777 Eldridge Pkwy., Ste. 500, Houston, TX 77079
PRECAUTIONS
KEEP FROM FREEZING. Do not apply when the tempera-
ture of the air and/or the concrete is less than 40° F (4° C).
DO NOT MIX OR DILUTE WITH ANY OTHER PRODUCTS
OR LIQUIDS. Do not use on surfaces that are later to be
painted, tiled, hardened, sealed or treated in any manner.
Do not use on patios, sidewalks or other areas where there
is typically no wheel traffic to abrade the white film surface.
Not recommended for use on residential applications.
HEALTH HAZARDS
Direct contact may result in mild irritation. Read and follow
all application, label, precautions, and health and safety
information prior to use. Refer to Material Safety Data Sheet
for complete health and safety information. =
U
SHELF LIFE
One year in original, unopened container. �^
WARRANTY
CMC Construction Services.warrants at the time and place we make shipment,our
material will be of good quality and will conform with our published specifications n__
in force on the date of acceptance of the order."Read complete warranty. Copy T
furnished upon request.The information contained herein is included for illustrative
purposes only,and to the best of our knowledge,is accurate and reliable. CMC
Construction Services. cannot however under any circumstances make any
guarantee of results or assume any obligation or liability in connection with the
use of this information.As CMC Construction Services has no control over the use
to which others may put its product,it is recommended that the products be tested
to determine if suitable for specific application and/or our information is valid in
a particular circumstance. Responsibility remains with the architect or engineer,
contractor and owner for the design,application and proper installation of each
product.Specifier and user shall determine the suitability of products for specific (—
application and assume all responsibilities in connection therewith LLJ
U
w
■
O
O
0
O
800-729-1 150 I www.cmcsheplers.com ■ 777 Eldridge Pkwy., Ste. 500, Houston, TX 77079
heeler's SHEP CURE 309 REZ ALL
PLRFORMfNCf PRCIIRCLS
WATER-BASED CONCRETE CURING COMPOUND
DESCRIPTION HEALTH AND SAFETY
The Shep Cure 309 Rez All series of water-based concrete Direct contact may result in mild irritation. Read and fol-
curing compounds is formulated from hydrocarbon resins low all application, precaution, label,and health and safety Revised:07/11
and may be used on interior, exterior,vertical, and horizon- information prior to use. Refer to Material Safety Data Sheet
tal concrete surfaces. Once applied,Shep Cure 309 Rez All for complete health and safety information.
forms a premium-grade membrane that retains an optimum
amount of water in freshly placed concrete for complete SPECIFICATIONS
hydration of the cement. NOTE: After approximately four • Complies with U.S. EPA, LADCO states, OTC states,
weeks, the membrane begins to chemically break down SCAQMD, and all other current North American VOC
when exposed to UV rays. The membrane regulations.
•
will eventually dissipate from the surface. This process usu Complies with Canada VOC Concentration
•
ally takes another 3 - 5 weeks under normal traffic, expo- Limits for Architectural Coatings Regulations.
sure to UV, and weathering •
ASTM C 309,Type 1, Classes A&B (Type 1-D also avail-
able)
conditions. • AASHTO M 148, Type 1, Classes A & B (Type 1-D also
PRIMARY APPLICATIONS available)
The Shep Cure 309 Rez All series has been used on both DIRECTIONS FOR USE
interior and exterior applications where paint, resilient tile, Surface Preparation: Application equipment must be
or resilient flooring may be applied later. Because of the clean and free of all previously used materials.
wide variety of coatings, paints, adhesives, and toppings Mixing: For optimum performance,gentle mixing or agita-
available, contact the manufacturer of the flooring system tion is recommended. CAUTION: TO AVOID FOAMING,
or subsequent coating or topping for application approval DO NOT MIX EXCESSIVELY. In the container, the curing
over resin-based curing compounds. A small test applica- compound appears ivory in color; however, it dries to a
tion is always recommended. clear,transparent coating with a very slight amber tint.
FEATURES& BENEFITS APPLICATION „
• When properly applied,Shep Cure 309 Rez All produces Apply in a uniform film to horizontal surfaces as soon as =
a premium-grade film,which optimizes water retention. the surface water disappears and the surface will not be LI'
• Furnished as a ready-to-use,true water-based compound. marred by walking workmen. On vertical surfaces, apply
• Produces hard, dense concrete ... minimizes hair check- promptly after the forms are removed. Shep Cure 309 Rez
ing, thermal cracking, dusting,and other defects. All may be applied with a typical commercial hand or power Q
• Offers a compressive strength significantly greater than sprayer. Use a Shepler's Performance Products sprayer that U
improperly cured or uncured concrete. produces a flow of 72 gal. (1.89 L) per minute under 40 psi 2
• Increases tensile strength for greater resistance to crack- (.276 MPa) of pressure. U
ing and surface crazing. w
• Improves resistance to abrasion and thecorrosive actions Clean-up: Prior to drying, cleanup can be accomplished of salts and chemicals. with soap and water. Once dried, use mineral spirits or •
other suitable petroleum solvent.
■ Minimizes excessive shrinkage. z
• Can be applied quickly and easily with conventional corn- PACKAGING O
mercial spray equipment. 5 Gallon (18.93 L) Pails
• Formulations also available with red fugitive dye added. 55 Gallon (208.20 L) Drums O
• VOC compliant...VOC content is <100 g/L.
TECHNICAL DATA
Z
Flash Point: >210°F (99°C). Forquestionsoboutthis
product,use our QR code
LEED INFORMATION
• May help contribute to LEED credits: ❑ ❑ 0
• IEQ Credit 4.2: Low-Emitting Materials: Paints&Coatings 0
• MR Credit 2: Construction Waste Mana ement a
• MR Credit 5: Regional Materials g ❑ '�e 1
Continued on reverse side
800-729-1150 l www.cmcsheplers.com • 777 Eldridge Pkwy., Ste. 500, Houston, TX 77079
COVERAGE
Approximately 200 sq. ft./gal. (4.91 m2/L). Coverage rate
may vary depending on conditions (temperature, wind,etc.)
at the jobsite, as well as the porosity and condition of the
concrete.
SHELF LIFE (TYPICAL)
When stored indoors and in original, unopened containers
at temperatures between 40- 90°F (4 -32°C),shelf life is a
minimum two years from date of manufacture.
LIMITATIONS
KEEP FROM FREEZING. Do not apply if air and/or concrete
temperature is less than 40°F (4°C). Improper or over-
application may increase the amount of time necessary for
the film to dissipate from the surface. SURFACE MAY DIS-
COLOR AND/OR YELLOW DUE TO OVERAPPLICATION.
DO NOT MIX OR DILUTE WITH ANY OTHER PRODUCTS
OR LIQUIDS. Do not apply paint, resilient flooring or any
other subsequent coatings or toppings without first checking
the specifications and securing approval from the manu-
facturer of the product being applied over Shep Cure 309
Rez All. A small test application is always recommended.
If removal of Shep Cure 309 Rez All is necessary, use a
degreaser.
PRECAUTIONS
KEEP FROM FREEZING. Do not apply if air and/or concrete
temperature is less than 40°F (4°C). Improper or over-
application may increase the amount of time necessary for
the film to dissipate from the surface. SURFACE MAY DIS- iw
COLOR AND/OR YELLOW DUE TO OVER-APPLICATION. z
DO NOT MIX OR DILUTE WITH ANY OTHER PRODUCTS "'
OR LIQUIDS. Do not apply paint, resilient flooring or any
other subsequent coatings or toppings without first checking ❑
the specifications and securing approval from the manufac- j
turer of the product being applied over Shep Cure 309 Rez V
All. A small test application is always recommended. Z
U
LU
I--
■
z
O
O
U-
z
I-
U
0
ce
800-729-1150 I www.cmcsheplers.com ■ 777 Eldridge Pkwy., Ste. 500, Houston, TX 77079