Gulf Bearing-LR 950731TECHNOLOGIES INC
Maxim Tech. · Southwestern Labs
2575 Lone Star Dr. · P.O. Box 224227
Dallas, Texas 75222
Telephone: (214) ~31-2700
F~X: (214) 920-1891
REPORT OF
REINFORCING STEEL INSPECTION
CUENT:
Gulf Bearing, Inc.
Attn: Ross Ramsey
501 Industrial Blvd.
Grapevine, TX 76051
PROJECT: Gulf Bearing
Coppell, Texas
CLIENT NO.: 3200037
REPORT NO.: 28161A
DATE OF SERVICE: 7/26/95
AUTHORIZATION: ONGOING
REPORT DATE: 7/31/95
SERVICES: Reinforcing steel inspection:
REPORT OF TESTS
On this date, reinforcing steel was observed for proper size, placement and
alignment prior to concrete placement. The results of this inspection are
attached and were furnished to the contractor at the time of inspection.
Technician time: 3:30pm-6:00pm
Technician: Yefim Palchik, MSCE
Senior Consultant
Report Distribution: MAXIM TECH.~SO~N LABS
(1) Gulf Bearing, Inc.
(1) Gromatzky, Dupree & Associates
(1) Brockette, Davis, Drake
(2) Rogers O'Srien F. Kin§ Cook, p.F..
(1) City of Coppe[L
(1) City of Coppel.[
1099 LW
Our etters and reports are for the exclusive use of_the client .to whom they are addressed and shall not he reproduced except in
full .without the approval of the test .n,g ahorat?ry,, i n.e use o~. pu[na.m, e m.us..t receiv~....our wt. itten ap@,roya, l._Ou.r letters .and rep. o~s
apply only to the sample tested and/or inspecteD, and are no; ~noica[~ve OT The cluar~it~es or apparently identical or similar products.
~OUTHIA/ESTERN LA~"'~IRATORIES
Materials, environmental and geotechnical engineering, nondestructive, metallurgical and analytical services
2575 Lone Star Drive · P.O. Box 224227, Dallas, Texas 75222 · 214/631-2700
REPORT OF
REINFORCING STEEL INSPECTION
CLIENT:
PROJECT:
Client No.: ~cmoO~
Report No.: ~/~/~4
Date of Service: V-
Page f of
SERVICE: Perform reinforcing steel inspection as detailed below.
INSPECTION RESULTS
Location and Items Inspected: /,"-~' ' /~ -c~ ,~~/_g ' P~ ~
ITEMS INSPECTED: CORRECT INCORRECT ITF~4S INSPECTED: CORRECT INCORRECT ITEMS INSPECTED: CORRECT INCORRECT
Placing Drawings Bar Length Column Ties Properly
Approved %// and Shape -~/ Tied and Spaced
Bar Size ~/ Proper Bar Placement ~/ Stirrup Spacing/Type
Bar Grade ~/ Properly Tied ~/ Welded Splices
Rebar Clean %/ Dowel Bars in Place ~/ Mechanical Splices
Form Clean ~/ Proper Bar Supports ~w' Proper Cover
No. of Bars ~/ L~pped Splices
132
SOU~jX/~ ''~'~'2LABORATORI~S ,
~e~tor ' s Signature
INC.