Northlake 635(9)-LR 970331MEIRO
IECH
Inspection & Testing Services, Inc.
2125 W. Pioneer Parkway, Suite E-1 - Grand Prairie, Texas 75051
outside of the DFVV Metroplex i
Held Inspection Report
Client: Hooper Engineering
Contractor: TAS Construction
Project: Marek Brothers Systems, Inc.
1233 Lakeshore Dr.
Coppell, TX
Subject: Roof framing 1-3, A-F (low roof)
Comments:
An initial jobsite inspection was made on this date, to perform
bolted and welded connections in the structural steel fran
Observations were as follows:
Welders qualification certificates were not available at the jobsit
While not all welds had been cleaned for inspection, a random sa
of satisfactory quality.
There was no weld specified for girder to column cap connecti
locations were installed from the bottom. The Engineer of Reco]
concerning a requirement for bolts installed in this manner (or '~
Deck angle splices and notches at panel joints and for panel lifting
welded.
C6x8.2 channel splices on 3 line (upper and lower levels) have
Engineer of Record should be consulted for minimum amount of
F on 2 line for girder bearing brackets which span panel joints.
of welded connections should be reviewed by a structural engin,
Shear clip to beam web connections at A and Fx3 need addition
Deck support angles were welded to precast panels with 3" wt
come locations (minimum). No weld detail was available for th~
Bottom track channel for wall on 3 line is not attached to the w.
Main support beam to precast panels on 3 line at A (upper and 1o
due to embed misalignment. Approved remedial sketches sh
engineer who approved these modifications.
Ray Waldrof
Phone 972/263-5521
Fax 972/988-6286
TX/OK/AR/LA) 1-800/549-6696
Report #: 97033107
Date: 03/31/97
Page 1 of I
visual ~spections on
ting for this project.
mpling revealed welds
~ns, and bolts at these
'd should be contacted
'eld requirements).
devices have not been
.ot been welded.
veld required at A and
lso, any modifications
',er.
al weld.
:Ids top and bottom at
,~se conditions.
dl at Ax3.
~,er) must be modified
auld be issued by the