Freeport NIP(2.2)-LR011206CONCRETE COMPRESSIVE STRENGTH TEST
Report Number: 94011204.0074
8901 Carpenter Frwy., Suite #100
Service Date: November 27, 2001 Dallas, Texas 75247
(214) 630-1010
Client: TNA North American, Inc. Report Date: December 06, 2001
Attn: Terry Raley Project: Sales Office & Warehouse Fac.
1321 Valwood Parkway, Suite 440 Coppell, Texas
Carrollton TX 75006
Project Number: 94011204
Material Information Sample Information
Specified Strength: 3600 psi (~ 28 Days Sample Time: 7:16am Date Cast: November 27, 2001
Technician: Barry Cuble
Batch Time: 6:05am Plant: 41 Weather Conditions: Cloudy, cool, windy
Supplier: TXI Accumulative Yards: 40
Truck No: 837 Ticket No: 3030874 Placement Method: Direct Discharge
Mix I.D. No.: 8273 Sample Locations: See placement location
Water Added Onsite Before Test: 10 Gallons Placement Location: Paving- N firelane & parking, bldg. slab
leaveout: Lines A/3-6
Sample location: 12' S of N curb, 25' E of
Royal Lane (See attached sketch)
Field Test Data
Test Result Specification Test Method
Slump, inches: 5.75 3-5 ASTM C-143
Air Content, %: 5.1 3-6 ASTM C-231
Concrete Temperature, o F: 59 ASTM C1064
Ambient Temperature, o F: 40 ASTM C-1064
Plastic Unit Weight, pcf:
Laboratory Test Data Age at Maximum Compressive
Set Specimen Diameter Area Date Test Load Strength
No. ID (inches) (sq. inches) Tested (days) (lbs) (psi)
I 1 6.00 28.27 12/04/2001 7 108,340 3,830
1 2 6.00 28.27 12/04/2001 7 109,700 3,880
Average 3,860
1 3 12/25/2001 28
1 4 12/25/2001 28
Services - Obtain samples of fresh concrete at the placement locations, perform required field tests and cast compressive
strength samples.
The tests were performed in general accordance with applicable ASTM, AASHTO, or DOT test methods. This report is exclusively for the use of the client
indicated above and shall not be reproduced except in full without the written approval of Terracon. Test results transmitted herein are only applicable
to the actual samples tested at the location(s) referenced and are not necessarily indicative of the properties of other apparently similar or identical
materials.
Page 1 of 5 °'-~w~°'~c=°~W
CONCRETE COMPRESSIVE STRENGTH TEST
~IN~, INC.
Report Number: 94011204.0074 sgot Carpenter Frwy., Suite #100
Service Date: November 27, 2001 Dallas, Texas 75247
(214) 630-1010
Client: TNA North American, Inc. Report Date: December 06, 2001
Attn: Terry Raley Project: Sales Office & Warehouse Fac.
1321 Valwood Parkway, Suite 440 Coppell, Texas
Carrollton TX 75006
Project Number: 94011204
Material Information Sample Information
Specified Strength: 3600 psi @ 28 Days Sample Time: 8:09am Date Cast: November 27, 2001
Technician: Barry Cuble
Batch Time: 7:35am Plant: 41 Weather Conditions: Partly cloudy, cool, windy
Supplier: T×I Accumulative Yards: 90
Truck No: 65 Ticket No: 3030989 Placement Method: Direct Discharge
Mix I.D. No.: 8273 Sample Locations: See placement location
Placement Location: See page 1
Sample location: 120' E of W, 30'N ors
curb
Field Test Data
Test Result Specification Test Method
Slump, inches: 5.50 3-5 ASTM C-143
Air Content, %: 3-6 ASTM C-231
Concrete Temperature, o F: 59 ASTM C1064
Ambient Temperature, o F: 40 ASTM C-1064
Plastic Unit Weight, pcf:
Laboratory Test Data Age at Maximum Compressive
Set Specimen Diameter Area Date Test Load Strength
No. ID (inches) (sq. inches) Tested (days) (lbs) (psi)
2 1 6.00 28.27 12/04/2001 7 107,800 3,810
2 2 6.00 28.27 12/04/2001 7 106,710 3,770
Average 3,790
2 3 12/25/2001 28
2 4 12/25/2001 28
Services - Obtain samples of fresh concrete at the placement locations, perform required field tests and cast compressive
strength samples.
The tests were performed in general accordance with applicable ASTM, AASHTO, or DOT test methods. This report is exclusively for the use of the client
indicated above and shall not be reproduced except in full without the written approval of Terracon. Test results transmitted herein are only applicable
to the actual samples tested at the location(s) referenced and are not necessarily indicative of the properties of other apparently similar or identical
materials, o,-~w,~o,-F~,~
Page 2 of 5
i "ir"',~
CONCRETE COMPRESSIVE STRENGTH TEST
Report Number: 94011204.0074
8901 Carpenter Frwy., Suite #100
Service Date: November 27, 2001 Dallas, Texas 75247
(214) 630-1010
Client: TNA North American, Inc. Report Date: December 06, 2001
Attn: Terry Raley Project: Sales Office & Warehouse Fac.
1321 Valwood Parkway, Suite 440 Coppell, Texas
Carrollton TX 75006
Project Number: 94011204
Material Information Sample Information
Specified Strength: 3600 psi @ 28 Days Sample Time: 10:13am Date Cast: November 27, 2001
Technician: Barry Cuble
Batch Time: 8:19am Plant: 41 Weather Conditions: Cloudy, cool
Supplier: TXI Accumulative Yards: 140
Truck No: 68 Ticket No: 3031046 Placement Method: Direct Discharge
Mix I.D. No.: 8273 Sample Locations: 25' N of S curb, 15' W of E
Placement Location: See page 1
Field Test Data
Test Result Specification Test Method
Slump, inches: 6.00 3-5 ASTM C-143
Air Content, %: 5.2 3-6 ASTM C-231
Concrete Temperature, o F: 59 ASTM Cl 064
Ambient Temperature, o F: 39 ASTM C-1064
Plastic Unit Weight, pcf:
Laboratory Test Data
Age at Maximum Compressive
Set Specimen Diameter Area Date Test Load Strength
No. ID (inches) (sq. inches) Tested (days) (lbs) (psi)
3 1 6.00 28.27 12/04/2001 7 96,110 3,400
3 2 6.00 28.27 12/04/2001 7 94,710 3,350
Average 3,380
3 3 12/25/2001 28
3 4 12/25/2001 28
Services - Obtain samples of fresh concrete at the placement locations, perform required field tests and cast compressive
strength samples.
The tests were performed in general accordance with applicable ASTM, AASHTO, or DOT test methods. This report is exclusively for the use of the client
indicated above and shall not be reproduced except in full without the written approval of Terracon. Test results transmitted herein are only applicable
to the actual samples tested at the location(s) referenced and are not necessarily indicative of the properties of other apparently similar or identical
materials.
Page 3 of 5
CONCRETE COMPRESSIVE STRENGTH TEST ~'"'i~
Report Number: 94011204.0074
89Ol Carpenter Frwy., Suite #100
Service Date: November 27, 2001 Dallas, Texas 75247
(214) 630-1010
Client: TNA North American, Inc. Report Date: December 06, 2001
Attn: Terry Raley Project: Sales Office & Warehouse Fac.
1321 Valwood Parkway, Suite 440 Coppell, Texas
Carrollton TX 75006
Project Number: 94011204
Material Information Sample Information
Specified Strength: 3600 psi @ 28 Days Sample Time: 11:44am Date Cast: November 27, 2001
Technician: Barry Cuble
Batch Time: 8:54am Plant: 41 Weather Conditions: Cloudy, cool, light winds
Supplier: TXI Accumulative Yards: 180
Truck No: 836 Ticket No: 3031100 Placement Method: Direct Discharge
Mix I.D. No.: 8273 Sample Locations: See placement location
Placement Location: See page 1
Sample location: 20' N of S curb, 10' E of
bldg.
Field Test Data
Test Result Specification Test Method
Slump, inches: 4.50 3-5 ASTM C-143
Air Content, %: 4.6 3-6 ASTM C-231
Concrete Temperature,o F: 63 ASTM C1064
Ambient Temperature, 0 F: 39 ASTM C-1064
Plastic Unit Weight, pcf:
Laboratory Test Data
Age at Maximum Compressive
Set Specimen Diameter Area Date Test Load Strength
No. ID (inches) (sq. inches) Tested (days) (lbs) (psi)
4 1 6.00 28.27 12/04/2001 7 108,310 3,830
4 2 6.00 28.27 12/04/2001 7 113,360 4,010
Average 3,920
4 3 12/25/2001 28
4 4 12/25/2001 28
Note:
Loads 150-180 were placed @ 2 1/2 hours old, contractor notified of time, temperature & slump prior to placement.
The tests were performed in general accordance with applicable ASTM, AASHTO, or DOT test methods. This report is exclusively for the use of the client
indicated above and shall not be reproduced except in full without the written approval of Terracon. Test results transmitted herein are only applicable
to the actual samples tested at the location(s) referenced and are not necessarily indicative of the properties of other apparently similar or identical
· materials.
Page 4 of 5 O._Lw~o,-F~o
CONCRETE COMPRESSIVE STRENGTH TEST
ENGINEF. PdNG, [~C.
Client: TNA North American, Inc. Project Number:94011204
Report Number: 94011204.0074
Services - Obtain samples of fresh concrete at the placement locations, perform required field tests and cast compressive
strength samples.
Technician: Barry Cuble /////'J/
Report Distribution: Z~~/~ring, Inc.
(1) TNA North American, Inc. (1) FACServices Inc
(1) Carrell Pccle & Yost Architecture (1) David Kent Reviewed by:
(1) R L Good.son Consulting Engineers (1) City of Coppell- Bldg Insp Eric J. ClevL,,land, P.E.
(1) Pacific Builders Inc (1) City of Coppell - Constr Insp Senior Project Engineer
The tests were performed in general accordance with applicable ASTM, AASHTO, or DOT test methods. This report is exclusively for the use of the client
indicated above and shall not be reproduced except in full without the written approval of Terracon. Test results transmitted herein are only applicable
to the actual samples tested at the location(s) referenced and are not necessarily indicative of the properties of other apparently similar or identical
materials.
Page 5 of 5 o,.~w,.o,
CONCRETE COMPRESSIVE STRENGTH TEST
Report Number: 94011204.0055
8901 Carpenter Frwy., Suite #100
Service Date: November 6, 2001 Dallas, Texas 75247
(214) 630-1010
Client: TNA North American, Inc. Report Da_t~
Attn: Terry Raley ProJect warehouse
1321 Valwood Parkway, Suite 440
Carrollton TX 75006~ -
O~'~-~ Project Number: 94011204
Material Informati Sample Information
Specified Strength: 3500 ~si @ 28 Days ~ I Sample Time: 8:10am Date Cast:November 6, 2001
Technician: Jason Kale
Batch Time: 7:23am Plant: 41 [~'!E' I·1~ Weather Conditions: Clear
Supplier: TXI ~' {" Accumulative Yards: 10
Truck No: 928 Ticket No: 3017509 Placement Method: Direct Discharge
Mix I.D. No.: 8273 ~ Sample Locations: See placement
location
Water Added Onsite Before Test: 20 Gallons ~' ~ent Location: Paving, see attached sketch
Water Added Onsite After Test: 5 Gallons
Field Test Data
Test Result Specification Test Method
Slump, inches: 5.50 3-5 ASTM C-143
Air Content, %: 3-6
Concrete Temperature, o F: 74 ASTM C1064
Ambient Temperature, 0 F: 60 ASTM C-1064
Plastic Unit Weight, pcf:
Laboratory Test Data Age at Maximum Compressive
Set Specimen Diameter Area Date Test Load Strength
No. ID (inches) (sq. inches) Tested (days) (lbs) (psi)
1 1 6.00 28.27 11/13/2001 7 96,780 3,420
1 2 6.00 28.27 11/13/2001 7 97,790 3,460
Average 3,440
1 3 6.00 28.27 12/04/2001 28 121,760 4,310
1 4 6.00 28.27 12/04/2001 28 120,210 4,250
Average 4,280
Services - Obtain samples of fresh concrete at the placement locations, perform required field tests and cast compressive
strength samples.
The tests were performed in general accordance with applicable ASTM, AASHTO, or DOT test methods. This report is exclusively for the use of the client
indicated above and shall not be reproduced except in full without the written approval of Terracon. Test results transmitted herein are only applicable
to the actual samples tested at the location(s) referenced and are not necessarily indicative of the properties of other apparently similar or identical
materials.
Page 1 of 3 o,~_w~,-~.~.~
CONCRETE COMPRESSIVE STRENGTH TEST
Report Number: 94011204.0055
8901 Carpenter Frwy., Suite #100
Service Date: November 6, 2001 Dallas, Texas 75247
(214) 630-1010
Client: TNA North American, Inc. Report Date: December 06, 2001
Attn: Terry Raley Project: Sales Office & Warehouse Fac.
1321 Valwood Parkway, Suite 440 Coppell, Texas
Carrollton TX 75006
Project Number: 94011204
Material Information Sample Information
Specified Strength: 3500 psi @ 28 Days Sample Time: 8:45am Date Cast: November 6, 2001
Technician: Jason Kale
Batch Time: 7:56am Plant: 41 Weather Conditions: Clear
Supplier: TXI Accumulative Yards: 10
Truck No: 660 Ticket No: 3017632 Placement Method: Direct Discharge
Mix I.D. No.: 8273 Sample Locations: See page 1
Placement Location: See page 1
Field Test Data
Test Result Specification Test Method
Slump, inches: 6.00 3-5 ASTM C-143
Air Content, %: 3-6
Concrete Temperature, o F: 73 ASTM C1064
Ambient Temperature, o F: 62 ASTM C-1064
Plastic Unit Weight, pcf:
Laboratory Test Data
Age at Maximum Compressive
Set Specimen Diameter Area Date Test Load Strength
No. ID (inches) (sq. inches) Tested (days) (lbs) (psi)
2 I 6.00 28.27 11/13/2001 7 105,370 3,730
2 2 6.00 28.27 11/13/2001 7 102,030 3,610
Average 3,670
2 3 6.00 28.27 12/04/2001 28 127,860 4,520
2 4 6.00 28.27 12/04/2001 28 130,690 4,620
Ave rage 4,570
Services - Obtain samples of fresh concrete at the placement locations, perform required field tests and cast compressive
strength samples.
The tests were performed in general accordance with applicable ASTM, AASHTO, or DOT test methods. This report is exclusively for the use of the client
indicated above and shall not be reproduced except in full without the written approval of Terracon. Test results transmitted herein are only applicable
to the actual samples tested at the location(s) referenced and are not necessarily indicative of the properties of other apparently similar or identical
materials.
Page 2 of 3 o,-~w,~o,
· CONCRETE COMPRESSIVE STRENGTH TEST ~1_~
Report Number: 94011204.0055 ~,~.~,~c.
8901 Carpenter Frwy., Suite #100
Service Date: November 6, 2001 Dallas, Texas 75247
(214) 630-1010
Client: TNA North American, Inc. Report Date: December 06, 2001
Attn: Terry Raley Project: Sales Office & Warehouse Fac.
1321 Valwood Parkway, Suite 440 Coppell, Texas
Carrollton TX 75006
Project Number: 94011204
Material Information Sample Information
Specified Strength: 3500 psi (~ 28 Days Sample Time: 11:00am Date Cast: November 6, 2001
Technician: Jason Kale
Batch Time: 8:58am Plant: 41 Weather Conditions: Clear
Supplier: TXI Accumulative Yards: 10
Truck No: 922 Ticket No: 3017749 Placement Method: Direct Discharge
Mix I.D. No.: 8273 Sample Locations: See page
Placement Location: See page 1
Field Test Data
Test Result Specification Test Method
Slump, inches: 3.25 3-5 ASTM C-143
Air Content, %: 3-6
Concrete Temperature, o F: 81 ASTM C1064
Ambient Temperature, o F: 79 ASTM C-1064
Plastic Unit Weight, pcf:
Laboratory Test Data
Age at Maximum Compressive
Set Specimen Diameter Area Date Test Load Strength
No. ID (inches) (sq. inches) Tested (days) (lbs) (psi)
3 1 6.00 28.27 11/13/2001 7 109,420 3,870
3 2 6.00 28.27 11/13/2001 7 105,950 3,750
Average 3,810
3 3 6.00 28.27 12/04/2001 28 123,570 4,370
3 4 6.00 28.27 12/04/2001 28 124,670 4,410
Ave rage 4,390
Services - Obtain samples of fresh concrete at the placement locations, perform required field tests and cast compressive
strength samples.
Report Distribution: .
(1) TNA North American, Inc. (1) FACServices Inc
(1) Carrell Poole & Yost Architecture (1) David Kent Reviewed by:
(1) R L Goodson Consulting Engineers (1) City of Coppell - Bldg Insp ~x' L~cj. Clev/~land,
P.E.
(1) Pacific Builders Inc (1) City of Coppell - Constr Insp Senior Proj~ct Engineer
The tests were performed in general accordance with applicable ASTM, AASHTO, or DOT test methods. This report is exclusively for th~ use of the client
indicated above and shall not be reproduced except in full without the written approval of Terracon. Test results transmitted herein are only applicable
to the actual samples tested at the location(s) referenced and are not necessarily indicative of the properties of other apparently similar or identical
materials.
Page 3 of 3