Windsor Estates-LR011030CONCRETE COMPRESSIVE STO'"'NGTH TEST
Report Number: 94001501.0031
Service Date: October 1, 2001
Client: Excel Group, Inc.
Attn: Bryan Peck
2639 Walnut Hill Ln #218
Dallas TX 75229
a division of lrlfrwfl
EWANEERM, 1W.
8901 Carpenter Frwy., Suite #100
Dallas, Texas 75247
(214) 630 -1010
"port Date: October 30,
Project: Windsor Estates
Coppell, Te
94001501
Material Information
Specified Strength: 4000 psi @ 28 Days
Batch Time: N/A Plant: N/A
Supplier: N/A
Truck No: N/A Ticket No: N/A
Mix I.D. No.: N/A
Field Test Data
Test
RPSUIt
Slump, inches: N/A
Air Content, %: N/A
Concrete Temperature,O F: N/A
Ambient Temperature, o F: N/A
Plastic Unit Weight, pcf:
Laboratory Test Data
Set
Specimen
Diameter
Area
No.
ID
(inches)
( sq. inches
1
1
6.00
28.27
1
2
6.00
28.27
Age at
Date Test
Tested (days)
10/08/2001 7
10/08/2001 7
Maximum
Compressive
Load
Strength
(Ibs)
(psi)
95,800
3,390
98,650
3,490
Average 3,440
1 3 6.00 28.27 10/29/2001 28 125,310 4,430
1 4 6.00 28.27 10/29/2001 28 126,930 4,490
Average 4,460
Services - Obtain samples of fresh concrete at the placement locations, perform required field tests and cast compressive
strength samples.
Technician: Jason Kale
Report Distribution:
(1) Excel Group, Inc.
(1) City of Coppell - Engr Dept
�I�
(1) City of Coppell - Bldg Insp Eric J. Cleveland, P.E.
Senior Project Engineer
The tests were performed in general accordance with applicable ASTM, AASHTO, or DOT test methods. This report is exclusively for the use of the client
indicated above and shall not be reproduced except in full without the written approval of Terracon. Test results transmitted herein are only applicable
to the actual samples tested at the location(s) referenced and are not necessarily indicative of the properties of other apparently similar or identical
materials.
Sample Information
Sample Time: N/A Date Cast: October 1, 2001
Technician: Contractor Made
Weather Conditions: Clear
Accumulative Yards: N/A
Placement Method: Direct discharge
Sample Locations: Sta. 0 +24, DeForest
Placement Location: Inlets
Specification
,
Reviewed by_
Page 1 of 1 01- Tmpfml- a -"