Loading...
1580PointWestBlvd__75019_79862 BACKFLOW PREVENTION ASSEMBLY TEST AND MAINTENANCE REPORT Name of PWS:Coppell PWS I.D.:0570040 Address:816 S.Coppell Road Coppell,Texas 75019 Phone:972-462-5150 Contact Person:Jerry Davis Catalog No: TXTCOP-22116 Test Date: 10/14/2019 Result: Passed Reason for Test: Existing Account Name : Four Points by Sheraton Dallas/Ft.Worth North Address of Assembly : 1580 Point West Blvd. : Address Type : Commercial Inspection The backflow prevention assembly detailed below has been tested as required by TCEQ regulations and is certified to be operating within acceptable parameters. Type of Assembly :Double Check Valve Frequency :Annual What does this serve? Irrigation Manufacturer :Wilkins ByPass : Model No :350 ByPass : Size :2"ByPass : Serial No :B085079 ByPass : Location At:North of Entrance Is the assembly installed in accordance with manufacturer recommendations and/or local codes?Yes Is the assembly installed on a non-potable water supply (auxiliary)?No Reduced Pressure Principle Assembly Type II Assembly Pressure Vacuum Breaker Spilled-Resistant Vacuum BreakerDoubleCheckValveAssembly 1st check 2nd check Relief Valve Bypass Check Air Inlet Check Valve Initial Test Date:10/14/2019 Time:11:10 AM Held at 2.8 psid Closed Tight Leaked Held at 2.7 psid Closed Tight Leaked Opened at psid Did not open Held at psid Closed Tight Leaked Opened at psid Did not open Did it fully open Yes No Held at psid Leaked Repairs andMaterialsUsed ** Test After Repair Date: Time: Held at psid Closed Tight Leaked Held at psid Closed Tight Leaked Opened at psid Held at psid Closed Tight Leaked Opened at psid Held at psid ***2nd check:numeric reading required for DCVA only Test gauge used: Potable Make: Midwest Model: 835 Serial No.: 10071103 Date Tested for Accuracy: 11/6/2018 Remarks : Firm Name : Cantu Fire Protection Licensed Tester : Daniel Cantu Firm Address : 1605 East Park Blvd.BPAT License # : BP0009580 Firm Phone No : 214-554-3105 License Expiration Date : 02/22/2022 The above is certified to be true at the time of testing. * Test Records must be kept for at least three years.[30 TAC §290.46(B)] ** Use only manufacturer's replacement parts.