NEW_585SRoyalLnSte200_75019_78653 BACKFLOW PREVENTION ASSEMBLY TEST AND MAINTENANCE REPORT
Name of PWS:Coppell
PWS I.D.:0570040
Address:816 S.Coppell Road
Coppell,Texas 75019
Phone:972-462-5150
Contact Person:Jerry Davis
Catalog No: TXTCOP-22085
Test Date: 9/25/2019
Result: Passed
Reason for Test: Replacement
Previous Serial No.: unkown
Account Name : Dexas International
Address of Assembly : 585 S Royal Ln Ste 200
Address Type : Commercial
Inspection
The backflow prevention assembly detailed below has been tested as required by TCEQ regulations and is certified to be operating within
acceptable parameters.
Type of Assembly :Double Check Valve Frequency :Annual What does this serve? FireLine
Manufacturer :Wilkins ByPass : Model No :2000BM3 ByPass : Size :3/4 ByPass : Serial No :57818 ByPass :
Location At:Unknown
Is the assembly installed in accordance with manufacturer recommendations and/or local codes?Yes
Is the assembly installed on a non-potable water supply (auxiliary)?No
Reduced Pressure Principle Assembly Type II
Assembly
Pressure Vacuum Breaker
Spilled-Resistant Vacuum BreakerDoubleCheckValveAssembly
1st check 2nd check Relief Valve Bypass Check Air Inlet Check Valve
Initial Test
Date:9/25/2019
Time:3:30 PM
Held at 1.5 psid
Closed Tight
Leaked
Held at 1.9 psid
Closed Tight
Leaked
Opened at psid
Did not open
Held at psid
Closed Tight
Leaked
Opened at psid
Did it fully open
Yes No
Held at psid
Leaked
Repairs andMaterialsUsed **
Test After Repair
Date:
Time:
Held at psid
Closed Tight
Leaked
Held at psid
Closed Tight
Leaked
Opened at psid Held at psid
Closed Tight
Leaked
Opened at psid Held at psid
***2nd check:numeric reading required for DCVA only
Test gauge used: Potable Make: Wilkins Model: TG-5 Serial No.: 09181652
Date Tested for Accuracy: 7/2/2019
Remarks :
Firm Name : Shipman Fire Licensed Tester : Herbert Taylor
Firm Address : 7700 Cody Ln.#2705 BPAT License # : BP0000639
Firm Phone No : 817-576-2580 License Expiration Date : 04/09/2020
The above is certified to be true at the time of testing.
* Test Records must be kept for at least three years.[30 TAC §290.46(B)]
** Use only manufacturer's replacement parts.