301SNorthpointDr_75019_134261 BACKFLOW PREVENTION ASSEMBLY TEST AND MAINTENANCE REPORT
Name of PWS:Coppell
PWS I.D.:0570040
Address:816 S.Coppell Road
Coppell,Texas 75019
Phone:972-462-5150
Contact Person:Jerry Davis
Catalog No: TXTCOP-22422
Test Date: 1/7/2021
Result: Passed
Reason for Test: Existing
Account Name : Current Water Customer
Address of Assembly : 301 S Northpoint Dr : Address Type : Commercial
Inspection
The backflow prevention assembly detailed below has been tested as required by TCEQ regulations and is certified to be operating within
acceptable parameters.
Type of Assembly :Double Check Valve Frequency :Annual What does this serve? FireLine
Manufacturer :Watts ByPass : Model No :007M1QT ByPass : Size :3/4 ByPass : Serial No :52343 ByPass :
Location At:in vault by street front of property
Is the assembly installed in accordance with manufacturer recommendations and/or local codes?Yes
Is the assembly installed on a non-potable water supply (auxiliary)?No
Reduced Pressure Principle Assembly Type II
Assembly
Pressure Vacuum Breaker
Spilled-Resistant Vacuum BreakerDoubleCheckValveAssembly
1st check 2nd check Relief Valve Bypass Check Air Inlet Check Valve
Initial Test
Date:1/7/2021
Time:8:00 AM
Held at 2.2 psid
Closed Tight
Leaked
Held at 2 psid
Closed Tight
Leaked
Opened at psid
Did not open
Held at psid
Closed Tight
Leaked
Opened at psid
Did not open
Did it fully open
Yes No
Held at psid
Leaked
Repairs andMaterialsUsed **
Test After Repair
Date:
Time:
Held at psid
Closed Tight
Leaked
Held at psid
Closed Tight
Leaked
Opened at psid Held at psid
Closed Tight
Leaked
Opened at psid Held at psid
***2nd check:numeric reading required for DCVA only
Test gauge used: Potable Make: Wilkins Model: TG5 Serial No.: 05131615
Date Tested for Accuracy: 4/3/2020
Remarks :
Firm Name : A-1 Backflow Prevention Specialist Licensed Tester : Ramon Ortiz
Firm Address : 5325 Dove Creek Dr BPAT License # : BP0001561
Firm Phone No : 817-988-5502 License Expiration Date : 02/12/2023
The above is certified to be true at the time of testing.
* Test Records must be kept for at least three years.[30 TAC §290.46(B)]
** Use only manufacturer's replacement parts.