NEW_1551SBeltlineSuite100_76248_130428 BACKFLOW PREVENTION ASSEMBLY TEST AND MAINTENANCE REPORT
Name of PWS:Coppell
PWS I.D.:0570040
Address:816 S.Coppell Road
Coppell,Texas 75019
Phone:972-462-5150
Contact Person:Jerry Davis
Catalog No: TXTCOP-48470
Test Date: 12/12/2020
Result: Passed
Reason for Test: New
Account Name : Current Water Customer
Address of Assembly : 1551 S Beltline Suite 100 : Address Type : Commercial
Inspection
The backflow prevention assembly detailed below has been tested as required by TCEQ regulations and is certified to be operating within
acceptable parameters.
Type of Assembly :Reduced Pressure Principle Frequency :Annual What does this serve? Domestic
Manufacturer :Watts ByPass : Model No :SS009M3QT ByPass : Size :1/2 ByPass : Serial No :027626 ByPass :
Location At:SYRUP RACK
Is the assembly installed in accordance with manufacturer recommendations and/or local codes?Yes
Is the assembly installed on a non-potable water supply (auxiliary)?No
Reduced Pressure Principle Assembly Type II
Assembly
Pressure Vacuum Breaker
Spilled-Resistant Vacuum BreakerDoubleCheckValveAssembly
1st check 2nd check Relief Valve Bypass Check Air Inlet Check Valve
Initial Test
Date:12/12/2020
Time:4:20 PM
Held at 10.2 psid
Closed Tight
Leaked
Held at 9.9
psid
Closed Tight
Leaked
Opened at 3.7
psid
Did not open
Held at psid
Closed Tight
Leaked
Opened at psid
Did not open
Did it fully open
Yes No
Held at psid
Leaked
Repairs andMaterialsUsed **
Test After Repair
Date:
Time:
Held at psid
Closed Tight
Leaked
Held at psid
Closed Tight
Leaked
Opened at
psid
Held at psid
Closed Tight
Leaked
Opened at psid Held at psid
***2nd check:numeric reading required for DCVA only
Test gauge used: Potable Make: Watts Model: TK99-E Serial No.: 0100744
Date Tested for Accuracy: 8/10/2020
Remarks :
Firm Name : Ansley Backflow Licensed Tester : John Ansley
Firm Address : 509 Forrest Lane BPAT License # : BP0006162
Firm Phone No : 817-360-9036 License Expiration Date : 04/04/2023
The above is certified to be true at the time of testing.
* Test Records must be kept for at least three years.[30 TAC §290.46(B)]
** Use only manufacturer's replacement parts.