Westbury Manor-CS 990106COPPELL, TEXAS 75019
P.O. Box 478
Coppell, Texas 75019
972-462-0022
January 6, 1999
Mr. David Gregory, E.I.T.
Goodwin and Marshall, Inc.
6001 Bridge Street, Suite 100
Fort Worth, TX 76112
RE: Westbury Manor
Dear Mr. Gregory:
The City of Coppell has reviewed the referenced plans and has the following comments to
offer:
Change the sidewalk note on all sheets to read as follows: "All sidewalks adjacent to
residential lots will be constructed by homebuilder. All other sidewalks and ADA ramps
will be built by developer."
Include the driveway details along London Way and Westbury Court (provided as
separate submittals) on the engineering plans. Note that the minimum sloped transition
into a curb inlet is 10', with 5' allowable if the driveway remm is sloped to the inlet as
well.
Include the "Heartz' Storm Drain sheets in thc engineering plans. Note on thc sheets that
they are not for construction, but for informational purposes only.
Make the water line connection to Sandy Lake Road into the 16" water line. The
proposed connection into the 8" water line will not be allowed because the 8" is being
abandoned as part of the Sandy Lake Road reconstruction.
Show a concrete collar at all storm drain pipe size changes.
Please use a wye connection at the junction of S.D. Line "P-2" and S.D. Line "P-3",
then provide a manhole for the junction box located at the S.D. Line "Heartz." This
request is made because the proposed manhole would be located in a residential back
yard. This would also eliminate the proposed 4'x4' junction box.
Include the detail for how S.D. Line "P-l" will be connected to the future Sandy Lake
Road storm drain system in the engineering plans. Label as future connection to S.D.
Line "Sandy Lake Road" to be constructed by others.
There are various other minor comments throughout the plans. When all comments have been
addressed, please return these marked plans and two sets of revised plans to the City for
review. If you have any questions, please contact me at (972) 304-7019.
Sincerely,
Kent M. Collins, E.I.T.
Graduate Engineer