Town Center BP-LR010514CONCRETE COMPRESSIVE STRENGTH TEST
Report Number: 94001422.0008
Service Date: April 30, 2001
Client:
Excel Group, Inc.
Attn: Bryan Peck
2639 Walnut Hill Ln #218
Dallas TX 75229
890~t Carpenter Finny., Suite #100
Dallas, Texas 75247
(214) 630-1010
Report Date: M~
Project: ~dP,ark?::~ .
Project Number: '9401;~11132'
Material Information
Specified Strength: 4000 psi @ 28 Days
Batch Time: 11:40am
Supplier: Redi-Mix
Track No: 287
LMix I.D. No.: 732
Plant: 5
Ticket No: 51580
Sample Information
Sample Time: 2:15pm
Technician: Roy Montgomery
Weather Conditions: Clear
Accumulative Yards: 150
Placement Method: Direct discharge
Sample Locations: See placement location
Placement Location: Paving, NW side of project
Sample location: 200' S of north curb, 30' E
of W curb
Field Test Data
Test Result Specification Test Method
Slump, inches: 6.00 3-5 ASTM C-143
Air Content, %: 3-6 ASTM C-172
Concrete Temperature, o F: 90 ASTM C-39
Ambient Temperature, o F: 78
Plastic Unit Weight, pcf:
Laboratory Test Data Age at Maximum Compressive
Set Specimen Diameter Date Test Load Strength
No. ID (inches) Tested (days) (lbs) (psi)
1 1 6.00 0510712001 7 76,840 2,720
1 2 6.00 05/07/2001 7 83,110 2,940
Average 2,830
1 3 05/28/2001 28
1 4 05/28/2001 28
Services - Obtain samples of fresh concrete at the placement locations, perform required field tests and cast compressive
strength samples.
Technician: Roy Montgomery
Report Distribution:
(1) Exce~ G~oup, Inc.
(1) City of Coppell - Engr Dept
(1) City of Coppell - BIdg Insp
Reviewed by:
Senior Project Engineer
The tests were performed in general accordance with applicable ASTM test methods. This report is exclusively for the usa of the client indicated above
and shall not be reproduced except in full without the written approval of Terracon. Test results transrnittod herein are only applicable to the actual
saropies tested at the location(s) referenced and are not necessarily indicative of the preper~ies of other apparently similar or identical materials.
CONCRETE COMPRESSIVE STRENGTH TEST
Report Number: 94001422.0010
Service Date: May 1, 2001
Client: Excel Group, Inc.
Attn: Bryan Peck
2639 Walnut Hill Ln #218
Dallas TX 75229
8901 Carpenter Frwy., Suite #100
Dallas, Texas 75247
(214) 630-1010
Report Date: May 14, 2001
Project: Town Center Business Park
205 East Parkway Blvd
Coppell, Texas
Project Number: 94001422
Material Information
Specified Strength: 3500 psi @ 28 Days
Batch Time: 1:04pm
Supplier: Redi-Mix
Track No: 223
Mix i.D. No.: 732
Field Test Data
Plant: 91
Ticket No: 137868
Sample Information
Sample Time: 1:30pm
Technician: Albert Garcia
Weather Conditions: Clear
Accumulative Yards: 30
Placement Method: Direct discharge
Sample Locations: 30' South of entrance
Placement Location: East side fimlane
Test Result Specification Test Method
Slump, inches: 6.00 3-5 ASTM C-143
Air Content, %: 4.1 3-6 ASTM C-172
Concrete Temperature, o F: 82 ASTM C-39
Ambient Temperature, o F: 76
Plastic Unit Weight, pcf:
Laboratory Test Data Age at Maximum Compressive
Set Specimen Diameter Date Test Load Strength
No. ID (inches) Tested (days) (lbs) (psi)
1 1 6.00 05/08/2001 7 80,510 2,850
1 2 6.00 05/08/2001 7 78,140 2,760
Average 2,810
1 3 05/29/2001 28
1 4 05/29/2001 28
Services - Obtain samples of fresh concrete at the placement locations, perform required field tests and cast compressive
strength samples.
Technician: Albert Garcia
Report Distribution:
(1) Excel Group, thC.
(1) City of Co,pail - Engr Dept
(I) City of Coppell - Bldg Insp
Reviewed by:
Eric J Cleveland, P E
Senior Project Engineer
The tests were performed in general accordance with applicable ASTM test methods. This report is exclusively for the use of the client indicated above
and shall not be repreduced except in full without the written approval of Terracon. Test results transmitted herein are only applicable to the aotual
samples tested at the location(s) referenced and are not necessarily indicative of the properties of other apparently similar or identical materials.