Amberpoint BP 2-LR030117FIELD DENSITY TESTING
Report Number: 94021380.0178
Service Date: January 2, 2003
lrerracan
8901 Carpenter Frwy, Ste #100
Dallas, Texas 75247
(214) 630-1010
Client: Transwestern Commercial Services
Attn: JamesGaspard
5001 Spring Valley Rd Ste 600 W
Dallas TX 75244
Report Date:
Project: Staples
201 Nodhpoint
Coppell, TX
Project Number: 94021380
Januaw 17,2003
Material Information
Material Laboratory
No. Test Method
Description and Classification
Lab Test Data Project Requirements
Optimum Max. Lab Water
Water Dry Unit Content Minimum Dry
Content Weight Range Unit Weight
(%) (pcf') (%) (% compaction)
1. 213800009 ASTM D 698 Lt brown silty clay
19.2 103.8 -1/+3 95
Field TestData
Test
No. Test Location
Probe Water Dry Unit Dry Unit
Lift/ Mat. Depth Content Weight Weight
Elevation No. (inches) (%) (pct') (% compaction)
Parking Lot, Fire Lane ~ NE Corner of
Building
953 50' N of grid line J/4
954 45' N of grid line J/1.5
955 45' N & 120' E of grid line J/1
956 75' E of grid line J/1
957 85' E of grid line H/1
~Grade 1 6 21.2 99.2 96
~Grade 1 6 20.6 98.8 95
~Grade 1 6 22.1 99,7 96
@Grade 1 6 20.5 99,4 96
~Grade 1 6 21.9 98.7 95
Comments:
Test results on this report meet project specification.
Services - Perform in-place density and moisture content tests to determine degree of compaction and material moisture
condition.
Field Test Method:ASTM D2922, ASTM D3017
Gauge ID:
Field Results Reporled To: Hill & Wilkinson
Technician: Bradford T. Rengstorff
Report Distribution:
(1) Transwestern Commercial Services (2) Cader & Burgess Inc
(1) O'Brien & Assoc (1) City o1' Coppell - Bldg Insp
(1) Hill & Wilkinson LTD (1) City of Coppell - Constr Insp
(1) TechniSIructures (1) Staples
Reviewed by:
HBC/Terrac
Eugene ar our
Principal
The tests were performed in general accordance with applicable ASTM, AASHTO, or DOT test methods. This report is exclusively for the use of the client
indicated above and shall not be reproduced except in full without the written approval of Terracon. Test results transmitted herein are only applicable
to the actual samples tested at the location(s) referenced and are not necessarily indicative of the properties of other apparently similar or identical
materials.
Page 1 of 1 o7 L~w,~o~