Amberpoint BP 2-LR030318FIELD DENSITY TESTING
Report Number: 94021380.0252
Service Date: March 4, 2003
Client: Transwestern Commercial Services
Attn: James Gaspard
5001 Spring Valley Rd Ste 600 W
Dallas TX 75244
lrerracun
8901 Carpenter FnNy, Ste #100
Dallas, Texas 75247
(214) 630-1010
Report Date:
Project: Staples
201 Northpoint
Coppell, TX
March 18, 2003
Project Number: 94021380
Material Information
Material Laboratory
No. Test Method
Description and Classification
Lab Test Data Proiect Requirements
Optimum Max. Lab Water
Water Dry Unit Content Minimum Dry
Content Weight Range Unit Weight
(%) (pcf) (%) (% compaction)
1. 213800009 ASTM D 698 Lt brown silty clay 19.2 103.8 -1/+3
Field Test Data Probe Water Dry Unit
Test Lift/ Mat. Depth Content Weight
No. Test Location Elevation No. (inches) (%) (pcf)
Sidewalk
1062 2' S of grid line N6 at Grade 1 6 18.7 99.2
1063 2' S of grid line N8 at Grade 1 6 19.4 99.7
1064 2' S of grid line N10 at Grade 1 6 20.6 100.4
1065 2' N of grid line J/2 at Grade 1 6 18.3 101.2
1066 2' N of gdd line J/3.5 at Grade 1 6 20.4 99.6
95
Dry Unit
Weight
(% compaction)
96
96
97
97
96
Comments:
Test results on this report meet project specification.
Services - Perform in-place density and moisture content tests to determine degree of compaction and material moisture
condition.
Field Test Method:ASTM D2922, ASTM D3017
Gauge ID:
Field Results Reported To: Contractor
Technician: Bradford T. Rengstorff
Report Distribution:
(1) Transwestern Commercial Services (2) Carter & Burgess Inc
(1) O'Bden & Assoc (1) City of Coppell - Bldg Insp
(1) Hill & V~lkinson LTD (1) City of Coppell - Constr Insp
(1) TechniStmctures (1) Staples Inc
Reviewed by:
HBC/T~acon
Eugene Harbour
Principal
The tests were performed in general accordance with applicable ASTM, A,ASHTO, or DOT test methods. This report is exclusively for the use of the client
indicated above and shall not be reproduced except in full without the written approval of Terracon. Test results transmitted herein are only applicable
to the actual samples tested at the location(s) referenced and are not necessarily indicative of the properties of other apparently similar or identical
materials.
Page 1 of 1