Community CU-CS030423Ken Hunter
From: Clark Key [key@pgal.com]
Sent: Wednesday, April 23, 2003 8:57 AM
To: Ken Hunter (E-mail); Alan Raetzman (E-mail)
Subject: FW: Community Credit Union Curb & Grate Inlet
State approval of the decel lane. Let me and or Doug know if we need a real letter from
the TX Dot.
-----Original Message-----
From: Douglas Barrilleaux [mailto:dougb@vilbig.com]
Sent: Wednesday, Aprii 23, 2003 8:54 AM
To: Clark Key
Subject: Fw: Community Credit Union Curb & Grate Inlet
----- Original Message -----
From: "Denise Prather" <DPRATHI@dot.state.tx.us>
To: <dougb@vilbig.com>
Cc: "Maurice Pittman" <MPITTMA@dot.state.tx.us>
Sent: Thursday, April 10, 2003 1:46 PM
Subject: Re: Community Credit Union Curb & Grate Inlet
> We offer no objections to the subject project to use TxDOT Standard
> detail for the Curb and Grate inlet. We are aware that the ponding
> width is 12.5.
> if additional information is required, please contact me or Maurice
> Pittman P.E.
> » > "Douglas Barillas" <dougb@vilbig.com> 04/10/03 08:37AM »>
> Denise,
> As per our conversation Fri. - April 04 at 2:45 PM, the gas line has
> been located in reference to the back of curb, and it will offer
> approximately 0.8' clearance from the back of the Curb & Grate Inlet.
> This should be adequate for the contractor to intail.
> Std. TxDOT Detail to be used for the Curb & Grate Inlet...file
> TY2CGIN.DGN
> Drainage:
> A - 0.492 acres
> I100 - 11,6 in/hr
> C - 0,9
> Q100 = 5.14 cfs
> Max Ponding is approximately 0.4'
> Please contact me as soon as you can, so that the contractor may start
> setting the grades at the curb & grate inlet.
> R/
> Douglas
1