ST0301-CS030718From:
To:
Date:
Subject:
Suzan Taylor
Chris Moorman
7/18/03 9:43AM
Re: Typical Section - Coppell Road
Chris:
The 28' (b/b) is the minimum width we need. if the survey shows that a wider road can be constructed,
then we would want a wider road designed and constructed. Coppell Road will be a minimum of 33' (b/b).
>>> "Chris Moorman" <CLM@freese.com> 07/18/03 09:20AM >>>
Suzan,
I can't recall if we have discussed a typical section for Coppell Road.
We are proceeding with a 28' (back of curb to back of curb) concrete
section (curb & gutter) on Bethel Road. We are in the process of
establishing the horizontal alignment and looking at overlaying in the
proposed pavement section for both Bethel and Coppell Roads. My
question is, should I use the same typical section for Coppell Road that
we are using for Bethel or is there another alternative(s) you would
like us to use?
Let me know at your best convenience. Thank you.
Sincerely,
Chris Moorman, E.I.T.
Freese & Nichols, Inc.
1701 N. Market St.
Suite 500 LB 51
Dallas, TX 75202
(214) 217-2221 - voice
(214) 217-2275 - fax
<http://www.freese.com/>