Loading...
Valley R Plaza 2B-LR030604FIELD DENSITY TESTING Report Number: 94031170 00 Service Date: May 27, 2003 1rerr acon 8901 Carpenter Frwy, Ste #100 Dallas, Texas 75247 (214) 630 -10 Client: Phase II BLMA Limited Attn: Tad Weatherford 5950 Berkshire Ln Ste 410 Dallas TX 75225 Report Date: June 04, 2003 Project: Valley Ranch Plaza Phase II 817 South MacArthur Blvd Coppell, TX Number: 94031170 Material Information Lab Test Data Project Requirements Water Optimum Max. Lab Water Mat. Depth Water Dry Unit Content Minimum Dry Material Laboratory Content Weight Range Unit Weight No. Test Method Description and Classification ( %) (pcf) ( %) (% compaction) 1.311700001 ASTM D 698 Med to dk brown clay 20.3 101.8 -2/ +4 95 Field .Test Data Probe Water Dry Unit Dry Unit Test Lift/ Mat. Depth Content Weight Weight No. Test Location Elevation No. (inches) ( %) (pcf) (i compaction) Sewer Backf ill, Entrance to Beltline 34 N bound lane Final 1 8 24.0 100.0 98 35 S bound lane Final 1 8 24.2 96.7 95 Water Line 36 Center line of drive, S of building Final 1 8 23.7 97.5 96 Comments: Test results on this report meet project specification. Services - Perform in -place density and moisture content tests to determine degree of compaction and material moisture condition. Field Test Method:ASTM D2922, ASTM D3017 Gauge ID: Technician: Burl E. Thomas Report Distribution: /// /racon (1) Phase II BLMA Limited (1) City of Coppell TX Reviewed by: (1) City of Coppell TX AP Eric J. Cleveland, P.E. Senior Project Engineer The tests were performed in general accordance with applicable ASTM, AASHTO, or DOT test methods. This report is exclusively for the use of the client indicated above and shall not be reproduced except in full without the written approval of Terracon. Test results transmitted herein are only applicable to the actual samples tested at the location(s) referenced and are not necessarily indicative of the properties of other apparently similar or identical materials. Page 1 of 1 o,.soww,.r�wnx.,