Four Seasons 2R-LR041109FIELD DENSITY TESTING
Report Number: 94041388.0008
Service Date: October 28, 2004
Client: Hill & Wilkinson LTD
Attn: Charles Hoagland
800 Klein Rd Ste 100
Piano TX 75074
Report Date:
Project: BCE Specialties
100 Royal Lane
Coppell, TX
Project Number: 94041388
lr'erracan
8901 Carpenter Frwy, Ste #100
Dallas, Texas 75247
(214) 630-1010
November 09, 2004
Material Information
Material Laboratory
No. Test Method
Description and Classification
Lab Test Data Project Requirements
Optimum Max. Lab Water
Water Dry Unit Content Minimum Dry
Content Weight Range Unit Weight
(%) (pcf) (%) (% compaction)
1. 413880003 ASTM D 698 Dark gray & brown clay w/sand
Field Test Data Probe
Test Lift/ Mat. Depth
No. Test Location Elevation No. (inches)
14
15
16
17
18
Datum:
Building Pad, Moisture Conditioned
Grid Line A-E/4-5 5' BEG 1 6
Grid Line A-E/4-5 4' BEG 1 6
Grid Line A-E/4-5 3' BEG 1 6
Grid Line A-E/4-5 2' BEG 1 6
Grid Line A-E/4-5 1' BEG 1 6
BEG = Below existing grade
19.7 101.1 +1/+5 92 - 98
Water Dry Unit Dry Unit
Content Weight Weight
(%) (pcf) (% compaction)
23.9 94.5 ~93
23.7 94.7 94
24.9 * 94.0 93
23.4 94.3 93
23.7 95.1 ,~9,4
Comments:
An asterisk (*) appears next to test results which do NOT meet the project specifications.
Services - Perform in-place density and moisture content tests to determine degree of compaction and material moisture
condition.
Field Test Method:ASTM D2922, ASTM D3017
Technician: Armando Rendon ,,,.¢ / //
Report Distribution: // /f ~
(1) Hill & Wilkinson LTD (1) 8C5 Specialties , ///J/~ } /
(1) CityofCoppellTX Rewewed by: ~ ~ - ' ~ ~
(1) City of Coppell TX Robe~ D. Ray, S~.
ete s were performed in general accordance w~th apphcable ASTM, AASHTO, or DOT test methods. Th~s repo~ ~s exclu hent
indicated above and shall not be reproduced except in full without the wri~en approval of HBC/Terracon. Test results transmi~ed herein are only
applicable to the actual samples tested at the location(s) referenced and are not necessarily indicative of the propeKies of other apparently similar or
identical materials.
FIELD DENSITY TESTING
Report Number: 94041388.0007
Service Date: October 28, 2004
Client: Hill & Wilkinson LTD
Attn: Charles Hoagland
800 Klein Rd Ste 100
Piano TX 75074
Report Date:
Project: BCE Specialties
100 Royal Lane
Coppell, TX
Project Number: 94041388
'lrerracan
8901 Carpenter Frwy, Ste #100
Dallas, Texas 75247
(214) 630-1010
November 09, 2004
Material Information
Material Laboratory
No. Test Method
Description and Classification
Lab Test Data Project Requirements
Optimum Max. Lab Water
Water Dry Unit Content Minimum Dry
Content Weight Range Unit Weight
(%) (pc0 (%) (% compaction)
1. 413880003 ASTM D 698 Dark gray & brown clay w/sand
19.7 101.1 >/= Opt. 95
Field Test Data Probe Water Dry Unit Dry Unit
Test Lift/ Mat. Depth Content Weight Weight
No. Test Location Elevation No. (inches) (%) (pcf) (% compaction)
Paving/Fire Lane __ 1~080
10 20' N & 20' W of NE corner of bldg. Subgrade I 6 19.9 98.9 98
11 20' N & 100' W of NE corner of bldg. Subgrade 1 6 19.9 100.9
12 20' N & 160' W of NE comer of bldg. Subgrade 1 6 20.3 100.6 __{100
13 20' N & 200' W of NE corner of bldg. Subgrade 1 6 19.7 99.9 ~
Comments:
Test results on this report meet project specification,
Services - Perform in-place density and moisture content tests to determine degree of compaction and material moisture
condition.
Field Test Method:ASTM D2922, ASTM D3017
Technician: Armando Rendon
(1) Hill & Wilkinson LTD (1) BCE Specialties
(1) City of Coppell TX Reviewed by: _
(1) cry of Coppel[ TX Robert D. Ray,~'l'~
(1) Hardy McCullah/MLM Architects In¢ Senior Project, tanager
The tests were performed in general accordance with applicable ASTM, AASHTO, or DOT test methods. This report is exclusively for the'use of the client
indicated above and shall not be reproduced except in full without the written approval of HBC/Terracon. Test results transmitted herein are only
applicable to the actual samples tested at the location(s) referenced and are not necessarily indicative of the properties of other apparently similar or
identical materials.
Page 1 of 1