Loading...
Four Seasons 2R-LR050225FIELD DENSITY TESTING Report Number: 94041388.0070 Service Date: February 9, 2005 lrerracan 8901 Carpenter Frwy, Ste #I00 Dallas, Texas 75247 (214) 630-1010 Client: Hill & Wilkinson LTD Attn: Charles Hoagland 800 Klein Rd Ste 100 Piano TX 75074 Report Date: February 25, 2005 Project: BCE Specialties 989 West Sandy Lake Road Coppell, TX Project Number: 94041388 Material Information Lab Test Data Prelect Requirements Optimum Max. Lab Water Water Dry Unit Content Minimum Dry Matedal Laboratory Content Weight Range Unit Weight No. Test Method Description and Classification (%) (pcf) (%) (% compaction) 1. 413880002 ASTM D 698 Dark brown clay w/gravel 21.2 99.0 -1/+3 95 2.413880003 ASTM D 698 Dark gray & brown clay w/sand 19.7 101.1 -1/+3 95 Field Test Data Probe Water Dry Unit Dry Unit Test LiftJ Mat. Depth Content Weight Weight No. Test Location Elevation No. (inches) (%) (pCO (% compaction) Rear Fire Lane Along Centerline 154 Gdd Line 8 at Centerline At Grade 1 6 24.1 95.8 97 155 Grid Line 10 at Centerline At Grade 2 6 21.1 99.2 98 156 Grid Line 12 at Centerline At Grade 1 6 23.7 93.9 95 Comments: Test results on this report meet project specification. Services - Perform in-place density and moisture content tests to determine degree of compaction and material moisture condition, Field Test Method~,STM D2922, ASTM D3017 Gauge ID: 32769 Technician: Michael E. Odom Field Results Reported To: H. L. w/Potter Report Distdbution: (1) Hill & Wilkinson LTD (1) Hardy McCullahSvlLM Architects [nc (1) TMBP Consulting Engineers (1) City of Coppei{ TX (1) City of Coppell TX (1) BCE Specialties Rober~ D. Ray, S~,~ Senior Project Mal~ger The tests were performed in general accordance with applicable ASTM, AASHTO, or DOT test methods. This report is exclusively for the use of the client indicated above and shall not be reproduced except in full without the written consent of our company. Test results transmitted herein are only applicable to the actual samples tested at the location(s) referenced and are not necessarily indicative of the properties of other apparently similar or identical materials. Page 1 of 1