Coppell Trade-LR050401 FIELD DENSITY TESTING
'Report Number: 94051081.0020
Service Date: Mamh 21,2005
Client: Coppell Trade Center LP
Attn: Al Sorrels
5055 Keller Spdngs Rd Ste 300
Addison TX 75001
'lrerracan
8901 Carpenter Finny, Ste #100
Dallas, Texas 75247
(214) 630-1010
Report Date: April 01, 2005
Project: Coppell Trade Center
NWC Sandy Lake & State St
Coppell, TX
Project Number: 94051081
Material Information
Material Laboratory
No. Test Method
Description and Classification
Lab Test Data Proiect Requirements
Optimum Max. Lab Water
Water Dry Unit Content Minimum Dry
Content Weight Range Unit Weight
(%) (pcf) (%) (% compaction)
1. 510810003 ASTM D698
2. 510810004 ASTM D 698
3. 510810008 ASTM D 698
4. 510810005 ASTM D 698
Field Test Data
Test
No.
Tan & brown clayey sand
Gray clay w/gravel
Tan clayey sand
Light brown silty clay w/gravel
Lift/ Mat.
Test Location Elevation
12.2 117,0 >/= +2 93
18.0 103.0 -1/+3 95
11.5 117.5 -1/+3 95
15.4 109.8 -1/+3 95
Probe Water Dry Unit Dry Unit
Depth Content Weight Weight
No. (inches) (%) (pct~ (% compaction)
Building Pad, Building C, See Attached
Sketch
47 20' S at center pad 2.5' BFG 1 6
48 150' S & 20' W of NE corner 1' BFG 1 6
49 250' S & 40' W of NE corner 1' BFG 1 6
Site Fill
50 375' N & 50' E of SE corner of Bldg. A 5' BFG 3 6
51 30' N & 30' W of SW corner of Bldg. B 5' BFG 4 6
Parking/Fire Lane
52 650' S & 40' E of SE corner of Bldg. C 2.5' BFG 2 6
53 180' S & 45' E of SE corner of Bldg. C 1.5' BFG 2 6
Channel Slope
54 30' left of center line, Sra. 4+00 1.5' BFG 2 6
55 25' left of center line, Sra. 6+50 2.5' BFG 2 6
Datum: BFG = Below final grade
14.6 109.6 /94
15.1 110.7 95
15.3 110.6 95
13.5 116.5 99
15.3 105.8 96
18.4 99,4 97
17.7 101.7 99
19.1 lOO.8 98
18.1 101.8 99
Comments:
Test results on this report meet project specification.
The tests were performed in general accordance with applicable ASTM, AASHTO, or DOT test methods. This report is exclusively for the use of the client
indicated above and shall not be reproduced except in full without the written consent of our company. Test results transmitted herein are only applicable
to the actual samples tested at the location(s) referenced and are not necessarily indicative of the properties of other apparently similar or identical
materials.
.FIELD DENSITY TESTING
Client: Coppell Trade Center LP
ll'erracon
Project Number:94051081
Report Number: 94051081.0020
Services - Perform in-place density and moisture content tests to determine degree of compaction and material moisture
condition.
Field Test Method:ASTM D2922, ASTM D3017
Gauge ID: 32769
Technician: Michael E. Odom
Field Results Reported To: Charlie w/Metroplex
(1) Coppell Trade Center LP (1) Merriman Assoc Inc
(1) Pritchard Associates In¢ (1) McFadden & Miller Reviewed by:
(I) City of Coppell TX Robert D. Rey,
(I) City of Coppe,, TX Senior Project Manage~/
The tests were performed in general accordance with applicable ASTM, AASHTO, or DOT test methods. This report is exclusively for the use of 4t'~ client
indicated above and shall not be reproduced except in full without the written consent of our company. Test results transmitted herein are only applicable
to the actual samples tested at the location(s) referenced and are not necessarily indicative of the properties of other apparently similar or identical
materials.
Page 2 of 2