Loading...
Coppell Trade-LR050629CONCRETE COMPRESSIVE STRENGTH TEST Report Number: 94051190.0018 Service Date: May 31, 2005 Client: Coppell Trade Center LP Attn: Al Sorrels 5055 Keller Springs Rd Ste 300 Addison TX 75001 lrerracan 8901 Carpenter Frwy, Ste #100 Dallas, Texas 75247 (214) 630-1010 Report Date: June 29, 2005 Project: Coppell Trade Center - Bldg C NWC Sandy Lake/Freeport Pkwy Coppell, TX Project Number: 94051190 Material Information Specified Strength: 4500 psi @ 28 Days Batch Time: 3:40pm Supplier: Southern Star Truck No: 931 Mix I.D. No.: 9361 Water Added Onsite Before Test: Water Added Onsite After Test: Field Test Data Test Plant: 27 Ticket No: 833785 0 Gallons 0 Gallons Result Slump, inches: 3.25 Air Content, %: N/A Concrete Temperature, o F: 89 Ambient Temperature, o F: 84 Plastic Unit Weight, pcf: N/A Laboratory Test Data Set No. 1 1 Specimen Diameter Area ID (inches) (sq. inches) 1 6.00 28.27 2 6.00 28.27 1 3 6.00 28.27 1 4 6.00 28.27 Sample Information Sample Time: 4:1 Opm Date Cast: May 31, 2005 Technician: Eric G. Jemigan Weather Conditions: Partly sunny, warm & mild Accumulative Yards: 9 Placement Method: Direct Discharge Sample Locations: Back Wall Placement Location: Back Wall of Culvert, 2nd from W Specification Test Method 3-5 N/A ASTM C143 ASTM C231 ASTM C1064 ASTM C1064 ASTM C138 Age at Maximum Compressive Date Test Load Strength Tested (days) (lbs) (psi) 06/07/2005 7 166,540 5,890 06/07/2005 7 161,930 5,730 Average 5,810 06/28/2005 28 184,050 6,510 06/28/2005 28 191,340 6,770 Average 6,640 Services - Obtain samples of fresh concrete at the placement locations, perform required field tests and cast compressive strength samples. Technician: Eric G. Jemigan Report Distribution: (1) COppel] Trade Center LP (1) T~hniStructures (1) City of Coppell TX (1) City of Coppell TX (1) Merriman Assoo Ino (1) McFadden & Miller (1) Ma[;atee Engineering In[; Robert D. Ray, S~ Senior Project. J,,~ager The tests were performed in general accordance with applicable ASTM, AASHTO, or DOT test methods. This report is exclusively for the use of the client indicated above and shall not be reproduced except in full without the written consent of our company. Test results transmitted herein are only applicable to the actual samples tested at the Icoation(s) referenced and are nat necessarily indicatfve of the properties of other apparently similar or identical materials. Page 1 of 1