Coppell Trade-LR051011FIELD DENSITY TESTING
Report Number: 94051190.0122
Service Date: October 3, 2005
Client:
Coppell Trade Center LP
Attn: Bennet Ratliff
5055 Keller Springs Rd Ste 300
Addison TX 75001
Report Date: C
Project: C
N
C
Project No.: 9,
lrEffacon
8901 Carpenter Frwy, Ste #100
Dallas, Texas 75247
(214) 630-1010
tober 11, 2005
ppell Trade Center - Bldg C
VC Sandy Lake/Freeport Pkwy
ppell, TX
;)51190
Material Information Lab Test Data Prelect Requirements
Optimum Max. Lab
Water Dry Unit Water Minimum Dry
Material Laboratory Content Weight Content Unit Weight
No. Test Method Description and Classification (%) (pcf) (%) (% compaction)
1. 510810002 ASTM D 698 Dark reddish brown sandy clay 15.2 106,2 >/=Opt 95
Field Test Data Probe Water Dry Unit Dry Unit
Test LiftJ Mat. Depth Content Weight Weight
No. Test Location Elevation No. (inches) (%) (pc0 (%compaction)
Wall Backfill
408 A.5/25.0 2' BFG 1 6 16.4 104.8 99
409 C.0/25.0 2' BFG 1 6 15.8 106.3 100
410 D.0/25.0 2' BFG 1 6 16.0 107.1 100+
411 D.5/25.0 1' BFG 1 6 17.3 105.4 99
412 C~5/25.0 1' BFG 1 6 15.4 104.7 99
413 A.5/25.0 1' BFG 1 6 16.3 105.9 100
Datum: BFG = below final grade
Comments:
Test results on this report meet project specification.
Services - Perform in-place density and moisture content tests to determine degree of compaction and material moisture
condition.
Field Test Method~,STM D2922, ASTM D3017
Gauge ID: 32769
Technician: Laramie S. Chronister
Field Results Reported To: Superintendent
Report Distribution:
(1) Coppell Trade Center LP
(1) TechniSlruclures
(1) City of Coppell TX
(1) City of Coppell TX
(1) Merriman Asscc Inc
(1) McFadden & Miller
(1) Macalee Engineering Inc
Reviewed by:
Senior Pn~ject
The tests were performed in general accordance with applicable ASTM, AASHTO, or DOT test methods. This report is exclusively for the use of the client
indicated above and shall not be reproduced except in full without the written consent of our company. Test results transmitted herein are only applicable
to the actual samples tested at the location(s) referenced and are not necessarily indicative of the properties of other apparently similar or identical
materials.
Page 1 of 1