Loading...
Coppell/121 Off Pk-LR041111'~ ACTEC ~' ENGINEERING AND CONSULTING MACTEC Engineering and Consulting 2200 Gravel Drive Fort Worth, Texas 761 1 8-71 23 7e1:817-284-775 Fax:817-589-1420 REPORT OF CONCRETE COMPRESSIVE STRENGTH CLIENT: SALYER AND ASSOCIATES 2557 SOUTHWEST GRAPEVINE PKWY PAGE 1 OF 1 SUITE 200 GRAPEVINE, TX 76051 PROJECTNO.: 9023747 REPORT NO.: 408065 PROJECT: HWY 121 BUSINESS PARK DATE OF SERVICE: 10/14/2004 AUTHORIZATION: REPORT DATE: 11 / 11 / 2 0 0 4 SERVICES: Test compressive strength specimens prepared by others and picked up at the project site. CONTRACTOR: SALYER AND ASSOCIATES CONCRETE SUPPLIER: NA PLANT: NA SPECIFICATION REQUIREMENTS STRENGTH: Not Provided SLUMP: NA AIR: NA METHOD OF TEST CURING: ASTM C31 BEARING CONTACT: ASTM C1231 TESTING: ASTM C3 9 PROJECT DATA CLASS OF CONCRETE: NA DATE OF PLACEMENT: 10 / 14 / 2 0 04 TIME SAMPLED: N/A BY: CME Division TEMPERATURE (DegF) -AIR: NA CONCRETE: NA TRUCK NO: NA TICKET N0: NA MEASURED SLUMP (in.): NOT PROVIDED AIR CONTENT(%): NA UNIT WEIGHT(pcf): NA LOCATION OF PLACEMENT: RETAINING WALL NORTH OF BUILDING #6. REPORT OF TESTS CONCRETE COMPRESSIVE STRENGTH - 6 X 12 CYLINDERS CYLINDER MAXIMUM COMPRESSIVE MARKED DATE AGE DIAMETER AREA LOAD STRENGTH SET NO. TESTED da s in. s .in. (Ibs, force) si FRACTURE TYPE REMARKS 1 1 10; 21/004 7 5.00 2'3.27 35356 ?020 PALE CAP 1 2 10/21/2004 7 6.00 28.27 89710 3170 PAD CAP 1 3 11/11/2004 28 6.00 28.27 97130 3440 PAD CAP 1 4 11/11/2004 28 6.00 28.27 94840 3350 PAD CAP ADDITIONAL COMMENTS: ALL INFORMATION OTHER THAN TEST RESULTS WAS FURNISHED TO MACTEC AND ASSUMED TO BE CORRECT. Technician: CME Division Report Distribution: 11 SALYER ANq ASSOCIATES MACTEC ~7) CITY OF COPPELL Tim Begole, CET. Our fetters and reports are for the exclusive use of the client to whom they are addressed and shall not be reproduced except in full without the approval of the testing laboratory The use of our name must receive our written approval. Our letters and reports 7007 TT apply only to the sample tested and/or inspected, and are not indicative of the quantities of apparently identical or similar products.