Billingsley-CS060628Keith Marvin -Hemingway Court LOMR Letter Draft
From: "Luedke, Brandon" <bLuedke@Halff.com>
To: "Kenneth Griffin" <kgriffin@ci.coppell.tx.us>
Date: 6/28/2006 5:38:49 PM
Subject: Hemingway Court LOMR Letter Draft
Ken,
Attached is a draft of the example letter we put together per your
request to give to the design engineer(s) for Hemingway Court. Please
review this attachment and make revisions or reply with comments.
We've inquired about the other information you requested (i.e. retaining
wall plans, soil density test reports), and should be receiving those
items tomorrow. We'll forward those on to you as quickly as possible.
If you have any questions, please give either me or Mark a call.....Mark
McGraw @ 214.346.6244........Me @ 214.217.6648
Regards,
Brandon A. Luedke, E.I.T.
Project Engineer
HALFF ASSOCIATES, INC.
8616 Northwest Plaza Drive
Dallas, Texas 75225
Phone 214-217-6648
Fax 214-361-5573
www. halff.com
Page 1
CC: "Keith Marvin" <kmarvin@ci.coppell.tx.us>, "McGraw, Mark" <MMcGraw@Halff.com>
Keith Marvin -DRAFT-Ltr Example 06-28-06.doc Page 1
DRAFT-DRAFT-DRAFT
[Date)
Kenneth M. Griffin, P.E.
Director of Engineering and Public Works
City of Coppell
255 Parkway Blvd.
P.O. Box 478
Coppell, Texas 75019
Dear Mr. Griffin,
Based upon my review as the engineer responsible for design of the Hemingway Court
development for Billingsley Company in Irving, Texas I, ,
certify that all fill placed and retaining wall constructed for the Hemingway Court
development is reasonably safe from flooding as defined by the Federal Emergency
Management Agency (FEMA) in 44CFR 65.2(c) shown below:
FEMA Definition 44CFR 65.2(c) .
For the purposes of this part, "reasonably safe from flooding"
means base flood waters will not inundate the land or damage
structures to be removed from the SFHA (Special Flood Hazard
Areas) and that any subsurface waters related to the base flood
will not damage existing or proposed buildings.
For any questions regarding design of this development, please contact me
at
[Phone]
Sincerely,
[Name]
[Position)
[Company)
[Address]
[Phone]
[Fax]
[E-mail]
Keith Marvin -DRAFT-Ltr Example 06-28-06.doc Page 2
Professional Engineer's Seal