Valley R Plaza 2-LR 970505G EOTECHNICAL
ENGINEERING GEE Consultants, I nc,
E NVIRONMENTAL
10046 Monroe Drive • Dallas, Texas 75229 • (214) 352 -5433 • Fax (214) 352 -6972
REPORT OF IN -PLACE DENSITY AND MOISTURE OF SOIL
_. �n tnc inch ABothnd- ARTIvf 112922 D1017 D698 Page 1 of 1
rtu teats urcct IntYjct L al i — a - 1 —
cc: Mr. Phil Holder - N.C., Inc., General Contractors
Mr. Ross Floyd - BMH, Inc.
Mr. John T. Evans - John T. Evans Company
Andy - AECC, Inc.
C��4
Our letters and reports are for die exclusive use of the client to whom they are addressed. The use f our name must receive our prior written approval. Our
letters and reports apply only to the sample tested and /or inspected, and are not necessarily indicative or the quantities of apparently identical or similar products.
Client: N .C. Inc.
Description
Maximum
Dry
Dry
Optimum
Moisture
Density
Content
Project: Valley Ranch Plaza
(LbslCuFt)
Percent
1. Yellowish Brown and Dark Gray Clay
105.5
17.2
Test Date: April 30, 1997
2. Dark Gray and Dark Brown Shaley Clay
94.2
22.6
3. (S.F.) Reddish Brown Sandy Clay with some gravel
121.0
10.2
Report Date: May 5, 1997
Required Density ( %): Min. 95%
Required Moisture ( %): Subgrade: Opt +5%
Select: Opt ±3%
Mat
Location /Elevation (and /or) Lift
In -Place
In -Place
Percent
No
Dry Density
Moisture
Compaction
Test
(Lbs /CuFt)
Content ( %)
No.
Probe
Depth
1
Pavement
47
75' North & 60' East of Office Building
109.4
17.7
103.7
6"
Pavement
48
45' South & 90' West of Northeast Building Corner
102.9
20.1
97.5
F6"
Pavement
49
90' West & 90' North of Southeast Building Corner
104.7
20.0
99.2
6 "
1
Pavement
50
150' West & 45' South of Northeast Building Corner
102.0
19.7
96.6
6"
rtu teats urcct IntYjct L al i — a - 1 —
cc: Mr. Phil Holder - N.C., Inc., General Contractors
Mr. Ross Floyd - BMH, Inc.
Mr. John T. Evans - John T. Evans Company
Andy - AECC, Inc.
C��4
Our letters and reports are for die exclusive use of the client to whom they are addressed. The use f our name must receive our prior written approval. Our
letters and reports apply only to the sample tested and /or inspected, and are not necessarily indicative or the quantities of apparently identical or similar products.