Northlake College-LR070921
KLEINFELDER
2211 Century Center Blvd., Suite #101, Irving, Texas 75062
972-870-0808 Metro 972-953-0398 Fax 972-870-0802
LABORATORY MOISTURE-DENSITY RELATIONSHIP RESULTS
TO: Dallas County Community College Dist. PROJECT: North Lake College, N Campus
1505 South Lamar, Suite 1015 W Sandy Lake Road @ SH 121
Dallas, Texas 75215 PROJECT NO: 87015
REPORT DATE: 9/21/2007
REPORT NO.: 097411
105 I
--~-t- I
104 . I
r
103 I '
c;::- I
u
Co
- 102
-
.c
en
~ 101
~
c 100
:!:::
c
::J
99
98
97
14 15 16 17 18 19 20 21 22 23 24
Moisture Content (%)
ZAVL SPECIFIC GRAVITY:
2.70
MATERIAL DESCRIPTION:
Gray & Brown Fat Clay
SAMPLE LOCATION:
N.E. Corner of Jobsite
SAMPLE NUMBER:
1388
SAMPLED BY:
R. Pickens
DATE SAMPLED:
9/14/2007
TEST PERFORMED BY:
J. Mayo
SAMPLE PREPARATION:
Moist
RAMMER TYPE:
Mechanical
PERCENT PASSING:
3/4" SIEVE: 100
3/8" SIEVE: 100
#4 SIEVE: 100
TEST METHOD:
ASTM 0-698-91
ASTM 0-4318 & ASTM 0-1140
LIQUID LIMIT:
52
LAB COMPACTED SAMPLE (FINER FRACTION)
OPTIMUM MOISTURE PERCENT:
18.5
MAXIMUM DENSITY LBS I CU FT:
103.0
PLASTIC LIMIT:
21
PLASTICITY INDEX:
31
CORRECTED VALUES OF TOTAL SAMPLE
OPTIMUM MOISTURE PERCENT:
PERCENT PASSING #200:
70
103.0
MAXIMUM DENSITY LBS I CU FT:
COPIES TO: Starling Richardson Const.; Attn: Eric Stanaland (eps@starlingrichardson.com)
Starling Richardson Const.; Attn: Andy Munoz (amunoz@starlingrichardson.cor KLEINFELDER
DCCCD Bond Office; Attn: Brenda Spinelli (brenda.spinelli@dcccd.edu)
DCCCD Bond Office; Attn: James Williams uames.williams@dcccd.edu)
DCCCD Bond Office; Attn: Mike Daniels (mike.daniels@dcccd.edu)
Jacobs; Attn: Andrea Stogner (Andrea.stogner@jacobs.com)
Jacobs; Attn: Jennifer Blount (Jennifer.blount@jacobs.com)
1- City of Coppell; Attn: Larry Davis
1- City of Coppell; Attn: Lee Stone
The results shown on this report are for the exclusive use of the client for whom they were obtained and apply only to the samples tested and/or inspected. They are not intended to be
indicative of the qualities of apparently identical products. The use of our name must receive prior written approval. Reports must be reproduced in their entirety.