Duke Lesley 3C-LR080404
Rone Engineering
..
~~/
_/~
-_/~..---'--
-------.
8908 Ambassador Row, Dallas, TX 75247
7701 W Little York, Ste 600, Houston, TX 77040
4421 Freidrich, Ste 195, Austin, TX 78744
Corporate Phone: (214) 630-9745
f Concrete Compressive Strength Test
Report No.: 312906
Project No.: 0711530
Date of Service: 02/07/2008
Report Date: 04/04/2008
Client:
Duke Construe' , LP
14241 Dall kwy, Ste 1000
Dallas, 75254-2936
Project: est Office I, 3C,.,
Services: Obtain samples of fresh concrete at the placement locations, perform required testing, cast compressive strength samples and bring
samples back to the laboratory for curing and testing in accordance with applicable standards.
PROJECT DATA
Contractor: Duke Construction, LP
Concrete Supplier: Potter Concrete
Plant: 01
Specification Requirements
Strength: 3,000 psi @ 28 days
Slump (in.): 3" - 5"
Air (%): 3% - 6%
Test Method: ASTM C-172
ASTM C-31 (except 10.1.2)
ASTM C-143
ASTM C-231
ASTM C-1064
ASTM C-138
ASTM C-39
Batch time: 08:33am
Concrete: 640F
Ticket No: 19235
Unit Weight (pet): NA
Measured
Slump
(inches)
8.0
Mix Design I.D.: 7750PW
Placement Date: 02/07/2008
Weather Conditions: Sunny
Time Sampled: 09:30am
Temperature - Air: 460F
Truck No: 141
Air Content: 8.0%
Overall Placement Location:
City sidewalks on Beltline Rd. from southeast corner of property to south of center
approach
Concrete Compressive Cylinder 6" x 12"
Maximum
Load
(Ibs)
96,680
Area
(in')
28.27
6.00
6.00
28.27
28.27
116,430
119,120
Average
134,190
Sample Location:
Truck cover 2/3 from north end of placement
REPORT OF TESTS
Cylinder
Marked Date Age
Set No. Tested (days)
1 1 02/14/2008 7
1 2 03/06/2008 28
1 3 03/06/2008 28
1 4 04/03/2008 56
Diameter
(in)
6.00
0tJ ~~ 5J] [s] DO D
Type 1
Type 2 Type 3 Type 4
Type 5
6.00
28.27
Type 6
fi/~
Started: 09:00am Finished: 1 0:30am
Technician: Alejandro Avendano
Report Distribution:
Orig: Duke Construction, LP (Dallas, TX)
Attn: Mr. David Miller (1-ec copy)
1-ec Duke Construction, LP Attn: Mr. Jason Sulzener
1-cc City of Coppell Attn: Mr. Larry Davis
1-cc City of Coppell Attn: Mr. Lee Stone
1-cc Potter Concrete Attn: Mr Ryan Skelly
Compressive
Strength
(psi)
3,420
Fracture
Type
Type6
4,120
4,210
4,170
4,750
Type2
Type5
TypeS
I pYJe:
C?
tY
Rone Engineering
p~
~
K. Scott Watson, AET
Project Manager
LIMITATIONS: The test results presented herein were prepared based upon the specifiC samples provided for testing. We assume no responsibility for variation in quality
(composition, appearance, etc.) or any other feature of similar subject matter provided by persons or conditions over which we have no control. Our letters and reports are
for the exclusive use of the clients to whom they are addressed and shall not be reproduced except in full without the written approval of Rone Engineering Services, Ltd.
(TMlKW) Page 1 of 1