ST9905DR-LR080730
CONCRETE COMPRESSIVE STRENGTH TEST
Report Number: 94081124.0063
Service Date: July 17, 2008
lrerracan
8901 Carpenter Frwy, Ste #100
Dallas, Texas 75247
(214) 630-1010
Batch Time: 9:20am Plant: 111
Supplier: Southern Star
Truck No: 1029 Ticket No:
Mix I.D. No.: 9363
Water Added Onsite Before Test: 15 Gallons
Water Added Onsite After Test: 0 Gallons
Report Date: July 30, 2008
Project: Bethel. Road I - #ST 99-05
Roadway & Drainage Improvements
City Limit Line to Freeport Parkway
Coppell, TX
Project No.: 94081124
Sample Information
Date Cast: July 17, 2008 Time: 10:20am
Sampled by: Johnny L. Clinton
Weather Conditions: Clear
Accumulative Yards: 10 Batch Size (cy): 10.00
Placement Method: Direct Discharge
Sample Locations: SW corner
Placement Location: Crosswalk on E side of Royal Lane at Bethel
Road
Sta. 31 +08
Client:
City of Coppell TX
AUn: Rick O'Dell
Engineering Dept
PO Box 9478
Coppell TX 75019
Material Information
Specified Strength: 3600 psi @ 28 Days
Field Test Data
Test
Slump, inches:
Air Content, %:
Concrete Temperature, of:
Ambient Temperature,oF:
Plastic Unit Weight, pcf:
Result
6.00
3.2
90
94
148.4
Specification
Test Method
ASTM C143
ASTM C231
ASTM C1064
ASTM C1064
ASTM C138
Laboratory Test Data
Age at
Set Specimen Diameter Area Date Test
No. ID (inches) (sq. inches) Tested (days)
1 1 6.00 28.27 07/24/2008 7
1 2 08/14/2008 28
1 3 08/14/2008 28
Services. Obtain samples of fresh concrete at the placement locations, perform required field tests and cast compressive
strength samples.
Maximum Compressive
Load Strength
(Ibs) (psi)
91,330 3,230
Report Distribution:
(1) City of Coppell TX
(1) Tiseo Paving Company
Reviewed by:
Terracon Rep: Johnny L. Clinton
ric J. CI ve and, P.E.
Senior Project Engineer
The tests were performed In general accordance with applicable ASTM, AASHTO, or DOT test methods. This report Is exclusively for the use of the client
indicated above and shall not be reproduced except In full without the written consent of our company. Test results transmitted herein are only applicable
to the actual samples tested at the locatlon(s) referenced and are not necessarily indicative of the properties of other apparently similar or Identical
materials.
Page 1 of 1
01.oaRJROt.f'ukJi'ii Key
CONCRETE COMPRESSIVE STRENGTH TEST
Report Number: 94081124.0065
Service Date: July 18, 2008
lrerracon
8901 Carpenter Frwy, Ste #100
Dallas, Texas 75247
(214) 630-1010
Batch Time: 12:55pm Plant: 111
Supplier: Southern Star
Truck No: 7039 Ticket No: 1317118
Mix I.D. No.: 9363
Water Added Onsite Before Test: 0 Gallons
Water Added Onsite After Test: 0 Gallons
Report Date: July 30, 2008
Project: Bethel Road I - #ST 99-05
Roadway & Drainage Improvements
City Limit Line to Freeport Parkway
Coppell, TX
Project No.: 94081124
Sample Information
Date Cast: July 18, 2008 Time: 1 :20pm
Sampled by: Jon M. Lindley
Weather Conditions: Clear
Accumulative Yards: 8 Batch Size (cy): 10.00
Placement Method: Direct Discharge
Sample Locations: SE corner of Bethel Rd. & Royal Ln.
Placement Location: Paving
Bethel Road & Royal Lane intersection
Client:
City of Coppell TX
AUn: Rick O'Dell
Engineering Dept
PO Box 9478
Coppell TX 75019
Material Information
Specified Strength: 3600 psi @ 28 Days
Field Test Data
Test
Slump, inches:
Air Content, %:
Concrete Temperature, of:
Ambient Temperature, of:
Plastic Unit Weight, pcf:
Result
5.00
2.7
94
97
148.0
Specification
Test Method
ASTM C143
ASTM C231
ASTM C1064
ASTM C1064
ASTM C138
Laboratory Test Data
Age at
Set Specimen Diameter Area Date Test
No. 10 (inches) (sq. inches) Tested (days)
1 1 6.00 28.27 07/25/2008 7
1 2 08/15/2008 28
1 3 08/15/2008 28
Services. Obtain samples of fresh concrete at the placement locations, perform required field tests and cast compressive
strength samples.
Maximum Compressive
Load Strength
(Ibs) (psi)
113,400 4,010
Report Distribution:
(1) City of Coppell TX
(1) Tiseo Paving Company
Reviewed by:
Terracon Rep: Jon M. Lindley
Eric J. C veland, P.E.
Senior P ct Engineer
The tests were performed In general accordance with applicable ASTM, AASHTO, or DOT test methods. This report Is exclusively for the use of the client
indicated above and shall not be reproduced except In full without the written consent of our company. Test results transmitted herein are only applicable
to the actual samples tested at the location(s) referenced and are not necessarily indicative of the properties of other apparently similar or Identical
materials.
Page 1 of 1
QI-MWBtROt.fub.nK.,-
CONCRETE COMPRESSIVE STRENGTH TEST
Report Number: 94081124.0069
Service Date: July 21, 2008
lrerracon
8901 Carpenter Frwy, Ste #100
Dallas, Texas 75247
(214) 630-1010
o Gallons
o Gallons
Report Date: July 30, 2008
Project: Bethel Road I - #ST 99-05
Roadway & Drainage Improvements
City Limit Line to Freeport Parkway
Coppell, TX
Project No.: 94081124
Sample Information
Date Cast: July 21, 2008 Time: 7:40am
Sampled by: Johnny L. Clinton
Weather Conditions: Clear
Accumulative Yards: 20 Batch Size (cy): 10.00
Placement Method: Direct Discharge
Sample Locations: See Placement Location
Placement Location: Paving
Eastbound turn lane at Creekview
Client:
City of Coppell TX
AUn: Rick O'Dell '
Engineering.Dept
PO Box 9478
Coppell TX 75019
Material Information
Specified Strength: 3600 psi @ 28 Days.
Batch Time: 7:15am
Supplier: Tiseo Paving
Truck No:
Mix 1.0. No.: 2478M
Water Added Onsite Before Test:
Water Added Onsite After Test:
Ticket No: Batch #2
Field Test Data
Test
Slump, inches:
Air Content, %:
Concrete Temperature, of:
Ambient Temperature, of:
Plastic Unit Weight, pcf:
Result
1.00
3.8
92
93
149.2
Specification
Test Method
ASTM C143
ASTM C231
ASTM C1064
ASTM C1064
ASTM C138
Laboratory Test Data
Age at
Set Specimen Diameter Area Date Test
No. 10 (inches) (sq. inches) Tested (days)
1 1 6.00 28.27 07/28/2008 7
1 2 08/18/2008 28
1 3 08/18/2008 28
Services.. Obtain samples of fresh concrete at the placement locations, perform required field tests and cast compressive
strength samples.
Maximum Compressive
Load Strength
(Ibs) (psi)
124,480 4,400
The tests were performed In general accordance with applicable ASTM, AASHTO, or DQT test methods. This report is exclusively for the use of the client
indicated above and shall not be reproduced except in full without the written consent of our company. Test results transmitted herein are only applicable
to the actual samples tested at the locatlon(s) referenced and are not necessarily indicative of the properties of other apparently similar or Identical
materials.
Page 1 of 3 O1""El/RIlI./'."."'"
CONCRETE COMPRESSIVE STRENGTH TEST
Report Number: 94081124.0070
Service Date: July 21, 2008
lrerracon
8901 Carpenter Frwy. Ste #100
Dallas, Texas 75247
(214) 630-1010
Batch Time: 8:39am Plant: 105
Supplier: Southern Star
Truck No: 9023 Ticket No: 01318241
Mix 1.0. No.: 9363
Water Added Onsite Before Test: 12Gallons
Water Added Onsite After Test: 0 Gallons
Field Test Data
Test
Slump, inches:
Air Content, %:
Concrete Temperature, of:
Ambient Temperature, of:
Plastic Unit Weight, pcf:
Report Date: July 30, 2008
Project: Bethel Road I - #ST 99-05
Roadway & Drainage Improvements
City Limit Line to Freeport Parkway
Coppell, TX
Project No.: 94081124
Sample Information
Date Cast: July 21, 2008 Time: 10:00am
Sampled by: Johnny L. Clinton
Weather Conditions: Clear
Accumulative Yards: 10 Batch Size (cy): 10.00
Placement Method:
Sample Locations: See Placement Location
Placement Location: Crosswalk at Creekview & Bethel
Client:
City of Coppell TX
Attn: Rick O'Dell
Engineering Dept
PO Box 9478
Coppell TX 75019
Material Information
Specified Strength: 3600 psi @ 28 Days
Result
5.00
3.2
91
94
146.8
Specification
Test Method
ASTM C143
ASTM C231
ASTM C1064
ASTM C1064
ASTM C138
Laboratorv Test Data
Age at
Set Specimen Diameter Area Date Test
No. 10 (inches) (sq. inches) Tested (days)
1 ' 1 '6.00 28.27 07/28/2008 7
1 2 08/18/2008 28
1 3 08/18/2008 28
Services. Obtain samples of fresh concrete at the placement locations, perform required field tests and cast compressive
strength samples.
Maximum Compressive
Load ' Strength
(Ibs) (psi)
111,060 3,930
Report Distribution:
(1) City 01 Coppell TX
(1) Tiseo Paving Company
Reviewed by:
Terracon Rep: Johnny L. Clinton
rlc J. leveland, P.E.
Senio Project Engineer
The tests were performed In general accordance with applicable ASTM, AASHTO, or DOT test methods. This report is exclusiv y for the use of the client
Indicated above and shall not be reproduced except In full without the written consent of our company. Test results transmitted herein are only applicable
to the actual samples tested at the location(s) referenced and are not necessarily indicative of the properties of other apparently similar or identical
materials.
Page 1 of 1
OI-MNBJROt.fllli.Ir. K.y
CONCRETE COMPRESSIVE STRENGTH TEST
Report Number: 94081124.0069
Service Date: July 21,2008
lrerracan
8901 Carpenter Frwy, Ste #100
Dallas, Texas 75247
(214) 630-1010
o Gallons
o Gallons
Report Date: July 30, 2008
Project: Bethel Road I - #ST 99-05
Roadway & Drainage Improvements
City Limit Line to Freeport Parkway
Coppell, TX
Project No.: 94081124
Sample Information
Date Cast: July 21, 2008 Time: 10:30am
Sampled by: Johnny L. Clinton .
Weather Conditions: Clear
Accumulative Yards: 140 Batch Size (cy): 10.00
Placement Method: Direct Discharge
Sample Locations: See Placement Location
Placement Location: Paving
Eastbound turn lane at CiCi's
Client:
City of Coppell TX
AUn: Rick O'Dell
Engineering Dept
PO Box 9478
Coppell TX 75019
Material Information
Specified Strength: 3600 psi @ 28 Days
Batch Time: 10:06am
Supplier: Tiseo Paving
Truck No:
Mix 1.0. No.: 2478M
Water Added Onsite Before Test:
Water Added Onsite After Test:
Ticket No: Batch #14
Field Test Data
Test
Slump, inches:
Air Content, %:
Concrete Temperature, of:
Ambient Temperature, of:
Plastic Unit Weight, pcf:
Result
1.00
4.0
93
94
148.4
Specification
Test Method
ASTM C143
ASTM C231
ASTM C1064
ASTM C 1064
ASTM C138
Laboratory Test Data
Age at
Set Specimen Diameter Area Date Test
No. 10 (inches) (sq. inches) Tested (days)
2 1 6.00 28.27 07/28/2008 7
2 2 08/18/2008 28
2 3 08/18/2008 . 28
Services. Obtain samples of fresh concrete at the placement locations, perform required field tests and cast compressive
strength samples.
Maximum Compressive
Load Strength
(Ibs) (psi)
128,090 4,530
The tests were performed in general accordance with applicable ASTM, AASHTO, or DOT test methods. This report Is exclusively for the use of the client
indicated above and shall not be reproduced except in full without the written consent of our company. Test results transmitted herein are only applicable
to the actual samples tested at the locatlon(s) referenced and are not necessarily indicative of the properties of other apparently similar or identical
materials.
Page 2 of 3
at-MWBIROt"fulur.Key
CONCRETE COMPRESSIVE STRENGTH TEST
Report Number: 94081124.0069
Service Date: July 21,2008
lrerracon
6901 Carpenter Frwy, Ste #100
Dallas, Texas 75247.
(214) 630-1010
o Gallons
o Gallons
Report Date: July 30, 2008
Project: Bethel Road I - #ST 99-05
Roadway & Drainage Improvements
City Limit Line to Freeport Parkway
Coppell, TX
Project No.: 94081124
Sample Information
Date Cast: July 21, 2008 Time: 12:50pm
Sampled by: Johnny L. Clinton
Weather Conditions: Clear
Accumulative Yards: 240 Batch Size (cy): 10.00
Placement Method: Direct Discharge
Sample Locations: See Placement Location
Placement Location: Paving
Eastbound turn lane at Royal Lane
Client:
City of Coppell TX
AUn: Rick O'Dell
Engineering Dept
PO Box 9478
Coppell TX 75019
Material Information
Specified Strength: 3600 psi @ 28 Days
Batch Time: 12:19pm
Supplier: Tiseo Paving
Truck No:
Mix I.D. No.: 2478M
Water Added Onsite Before Test:
Water Added Onsite After Test:
Ticket No: Batch #24
Field Test Data
Test
Slump, inches:
Air Content, %:
Concrete Temperature, of:
Ambient Temperature, of:
Plastic Unit Weight, pcf:
Result
1.00
3.2
99
100
152
Specification
Test Method
ASTM C143
ASTM C231
ASTM C1064
ASTM C1064
ASTM C138
Laboratory Test Data
Age at
Set Specimen Diameter Area Date Test
No. 10 (inches) (sq. inches) Tested ~
3 1 6.00 28.27 07/28/2008 7 .
3 2 08/18/2008 28
3 3 08/18/2008 28
Services. Obtain samples of fresh concrete at the placement locations, perform required field tests and cast c<;lmpressive
strength samples.
Maximum Compressive
Load StrenWh
(Ibs) (psi
116,030 4,100
Terracon Rep: Johnny L. Clinton
Report Distribution:
(1) City of Coppell TX
(1) Tiseo Paving Company
Reviewed by:
. . En ~C veland, P.E.
Senior roject Engineer
The tests were performed in general accordance with applicable ASTM, AASHTO, or DOT test methods. This report Is excluslvel for the use of the client
indicated above and shall not be reproduced except in full without the written consent of our company. Test results transmitted h rein are only applicable
to the actual samples tested at the location(s) referenced and are not necessarily Indicative of the properties of other apparently Sl liar or identical
mateiiais:
Page 3 of 3
Q1-M'NSlRDI.fut&n K.y
CONCRETE COMPRESSIVE STRENGTH TEST
Report Number: 94081124.0071
Service Date: July 22, 2008
lrerracon
8901 Carpenter Frwy, Ste #100
Dallas, Texas 75247
(214) 630-1010
o Gallons
o Gallons
Report Date: July 30, 2008
Project: Bethel Road I - #ST 99-05
Roadway & Drainage Improvements
City Limit Line to Freeport Parkway
Coppell, TX
Project No.: 94081124
Sample Information
Date Cast: July 22, 2008 Time: 8:00am
Sampled by: Johnny L. Clinton
Weather Conditions: Clear
Accumulative Yards: 10 Batch Size (cy): 10.00
Placement Method: Direct Discharge
Sample Locations: W bound turn lane at Royal Lane
Placement Location: W bound turn lane at Royal Ln.; E bound turn
lane into Trade Point; W bound into USPS;
W bound into rear of USPS
Client:
City of Coppell TX
Attn: Rick O'Dell
Engineering Dept
PO Box 9478
Coppell TX 75019
Material Information
Specified Strength: 3600 psi @ 28 Days
Batch Time: 7:51 am
Supplier: Tiseo Paving
Truck No:
Mix 1.0. No.: 2478M
Water Added Onsite Before Test:
Water Added Onsite After Test:
Ticket No:
Field Test Data
Test
Slump, inches:
Air Content, %:
Concrete Temperature, of:
Ambient Temperature, OF:
Plastic Unit Weight, pcf:
Result
1.00
1.0
93
94
154.8
Specification
Test Method
ASTM C143
ASTM C231
ASTM C1064
ASTM C1064
ASTM C138
Laboratory Test Data
Age at
Set Specimen Diameter Area Date Test
No. 10 (inches) (sq. inches) Tested (days)
1 1 6.00 28.27 07/29/2008 7
1 2 08/19/2008 28
1 3 08/19/2008 28
Services. Obtain samples of fresh concrete at the placement locations, perform required field tests and cast compressive
strength samples.
Maximum Compressive
Load Strength
(Ibs) (psi)
158,430 5,600
The tests were performed in general accordance with applicable ASTM, AASHTO, or DOT test methods. This report is exclusively for the use of the client
indicated above and shall not be reproduced except in full without the written consent of our company. Test results transmitted herein are only applicable
to the actual samples tested at the location(s) referenced and are not necessarily Indicative of the properties of other apparently similar or Identical
materials.
Page 1 of2
Dt-MWBIR01.futUlel<ey
CONCRETE COMPRESSIVE STRENGTH TEST
Report Number: 94081124.0071
Service Date: July 22, 2008
lrerracon
8901 Carpenter Frwy, Ste #100
Dallas, Texas 75247
(214) 630-1010
o Gallons
o Gallons
Report Date: July 30, 2008
Project: Bethel Road I - #ST 99-05
Roadway & Drainage Improvements
City Limit Line to Freeport Parkway
Cappell, TX
Project No.: 94081124
Sample Information
Date Cast: July 22, 2008 , Time: 10:30am
Sampled by: Johnny L. Clinton
Weather Conditions: Clear
Accumulative Yards: 120 Batch Size (cy): 10.00
Placement Method: Direct Discharge
Sample Locations: W bound turn lane into USPS
Placement Location: W bound turn lane at Royal Ln.; E bound turn
lane into Trade Point; W bound into USPS;
W bound into rear of USPS
Client:
City of Coppell TX
Attn: Rick O'Dell
Engineering Dept
PO Box 9478
Coppell TX 75019
Material Information
Specified Strength: 3600 psi @ 28 Days
Batch Time: 10:18am
Supplier: Tiseo Paving
Truck No:
Mix I.D. No.: 2478M
Water Added Onsite Before Test:
Water Added Onsite After Test:
Ticket No:
Field Test Data
Test
Slump, inches:
Air Content, %:
Concrete Temperature, of:
Ambient Temperature, of:
Plastic Unit Weight, pcf:
Result
1.50
3.6
97
98
148.5
Specification
Test Method
ASTM C143
ASTM C231
ASTM C1064
ASTM C1 064
ASTM C138
Laboratorv Test Data
Age at
Set Specimen Diameter Area Date Test
No. JD (inches) (sq. inches) Tested (days)
2 1 6.00 28.27 07/29/2008 7
2 2 08/19/2008 28
2 3 08/19/2008 28
Services - Obtain samples of fresh concrete at the placement locations, perform required field tests and cast compressive
strength samples.
Maximum Compressive
Load Strenijth
(Ibs) (psi
122,680 4,340
Report Distribution:
(1) City of Coppell TX
(1) Tiseo Paving Company
Reviewed by:
Terracon Rep: Johnny L. Clinton
Eric J. eveland, P.E.
Senior roject Engineer
The tests were performed in general accordance with applicable ASTM, AASHTO, or DOT test methods. This report is exclusive I for the use .of the client
Indicated above and shall not be reproduced except In full without the written consent of our company. Test results transmitted he eln are only applicable
to the actual samples tested a\ the location(s) referenced and are not necessarily indicaUve of the properties of other apparently similar or Identical
materials.
Page 2 of 2
OtoMWBlROt-FuknK.,.