DRC comments.COPPELL
Pro~ect ID FP-03-0086
Addrese
CITY OF COPPELL
DRC REPORT
Project Name
COPPELL
Coppell/121 Office Park, Lot 2, Final Plat
Prolect Type
ADDlication Date
Case Manager
Proiect Deserlution
Final Plat
1 t/18/2003
Matt Steer
Final Plat of Lot 2 to allow the development of an approximate 8,288 square-foot one-story office building on 1.1 acres
of property.
Agency
Building Inspection
Electric and Gas
Engineering
1 of 2
Reviewed By Review Date
Greg Jones 11/25/2003
Jeff Curry 11/21/2003
Teresa Turner 11/24/'2003
No comments made
Please contact Jeff Curry at 972-570-4126 to discuss
electdc easement requirements.
1. All work taking place within TxDOT ROW must be
approved and permitted by them.
2. ALI work must be coordinated with the construction
of the maintanes of S.H. 121.
3. Per the City's Subdivision Ordinance, drainage and
utility easements are to be a minimum of 20' wide and
open drainage is not allowed along the front and
sides of any development other than residential.
4. All water meters/vaults must be within the ROW or
in a dedicated easement.
5. Verify with the fire department that a looped fire
line is not required at this time.
6. The property owner to the east must grant
permission for the drainage easement and also for any
work that may extend over the property line.
7. Work with the planning department for correct title
and signature block requirements.
8. Include a fire lane curve data table.
9. Additional utility easements and utility
requirements may be identified during engineering
review.
Fire Administration
Parks and Recreation John Elias 11/24/2003 No comments
COPPELL
Agency
Planning Department
Reviewed By
Matt Steer
CITY OF COPPELL
DRC REPORT
Review Date
11/21/2003
COPPELL
Comments
Final Plat
1. Provide an off site easement for the 10' east of this
property needed to accommodate the proposed
drainage facilities.
2. Show the existing 20' utility easement on the
southern property line if not planned to be abandoned.
3, Note that this plat will be filed in both Denton and
Dallas Counties.
4. Place the Flood Plain Administrator's signature
block on plat,
5. Clearly identify the 99.66' and 86,86' dimensions at
the north east corner of the property.
6. Revise franchise utility signature block as shown on
attached.
7. Properly identify existing and proposed easements
and their locations.
8. Use standard line types for property lines and
easements.
9, Change title block to read that the properly is
located within the City of Coppell and Dallas and
Denton Counties.